1980 CHEVROLET 4X4 Teardown, 6.0 LS, Fabrication, Fuel system!

ITS TIME TO TEAR INTO THE LEGANDARY OL ROY! We appreciate the constant support and I hope you guys enjoy the video!
MERCHANDISE AVAILABLE AT
puddinsfabshop...
SECOND CHANNEL
/ @puddinsfabshop2
PATREON
/ puddinsfabshop
INQUIRIES EMAIL
[e-mail]
INSTAGRAM
@puddinsfabshop
SUBSCRIBE! ((THANK YOU GUYS FOR THE CONTINUED SUPPORT!))
#c10 #greenweenie #junkyardgold

[@deadclutch]

Don't matter what it is, any build for a guy called Dad is a build I'm behind!

[@El.CapitanPuddles]

made me tear up

[@digit7748]

I THINK YOUR DAD LOVES THAT TRUCK BECAUSE IT REMINDS HIM OF HOW PROUD HE WAS OFF YOU HEADING OF TO THE AIR FORCE AND NOW OF WHAT U HAVE ACHIEVED ❤️❤️ cheers Marty (Australia)

[@jerryantaya1266]

He should be proud. He raised a hood man for sure.

[@edelio2743]

She definitely needs a "Puddin Pop" decal for the finished product !!!!

[@VorlonFrog]

HOT DAMN!!!! It's Puddin' and Ol' Roy time, FINALLY!!! Even Theo is pumped about refurbishing Ol' Roy.

[@rickregister9424]

Puddin I waited to watch this till today to help me get through my first day of chemo and radiation. Your videos are so helpful. Thank you.

[@michaelpendarvis7814]

@rickregister9424, sending prayers your way!! 🙏🙏

[@TomTom2149936]

I hope you keep the Ol Roy on the hood when it's finished, it's what makes it Ol Roy 😊

[@jimmywarner3579]

OL'ROY will be on the hood

[@Boomer_Sooner]

Just happened to be in Shawnee today, from OKC, I decided to drive a bit more and went over to Taco Boy. Ill tell you what, the owner of the place was a 100% pure Grade A human being. Very awesome people. Once I told him I came into there because I saw it on PFS, he gave me some of his stickers and all. To top it all off, I had one of the best burritos to be made in the state of Oklahoma. Hope to go there again sometime. Wish they had an OKC location.

[@jamesroets800]

Man - that dog sure does love you, Puddin'.

[@ktmcc4360]

With that green you need an air force style logo for ol' Puddin's fab shop on the door. You should tag your rank and honors somewhere on the truck. Just small tags on the glove box. It would mean so much to him.

[@charleystoneking6712]

A roundel would be sweet, don't know if it's Puddin Pops' style but it would be sweet

[@edwinlandy]

Eh - better to live in fame without the risk of going down in flames.

[@EllisonBrandon48]

You need to add that spacer for the flexplate to the snout of your converter.. the flexplate they sent you is for a 4l60e transmission, that snout adapter makes the older transmissions fit into the pilot of the engine.. OR you can run the factory 4l80e flexplate which is the correct size

[@steelmill]

Yes Sir,Almost 2 hours of my favorite mechanic.

[@trevorupton6904]

Me to cheers thanks for keeping us entertained 😊😅

[@robinbunton913]

Theo just has a “who’s a good boi” vet check, I hope. 🐾🐾❤️

[@wesinbama]

Need to get your Dad a set of VGG Hood Saver 5000 brackets for the hood. I’m sure Derek would send you a set if you promoted them.

[@demolitionsexpert]

didnt he already fabricate something similar before to re enforce another hood?

[@blahblahdrunksheep]

Be cheaper to make them

[@markmckeachnie4484]

@@wesinbama I heard that the hoods were built to fold up there in case of a accident. How safe are those , I hope there safe , because Derek is the best .

[@01ls1z28dabx]

He's a fabricator, would be pretty weak to buy something he could easily make.

[@DocSprocket]

​@01ls1z28dabx Nothin wrong with guys supporting each other.

[@hughobrien4139]

I sure like the hard work mixed with humor. Great stuff. Being over the hill by more than slightly it sure wears me out working on our old truck trying to get everything back in shape. These videos help my moral and sense of reality. This stuff ain’t easy no matter how young you are.

[@dogpatchfab]

Bringin Ol Roy back to the future for Puddin Pops! Great way to pay it forward mr.!

[@brettjohnson8722]

I know you will never respond to this comment but I fit two years old. I own the last two trucks my dad owned. I love them. I take care of them and the fact you’re doing this for your dad is awesome pop #

[@TireSlayer55]

You write damn well for a two year old! And taking care of trucks too. Very impressive!

[@brettjohnson8722]

@@TireSlayer55 lol talk to text. Should say 52

[@davidhelmuth6654]

Sir mortski give us a square body now this… It’s like you two know each other and talk or something! 😱🤣

[@AndreasLarsson95]

The tow rolla is the master tow.. Best car in the puddin fleet!

[@DavidBooze]

I know that puddin pop must be very proud of his boy. It is so easy to see from your videos that you are a hard-working young man and would make any father proud!

[@PeterBrock427]

Yes he comments all videos to ...proud dad..

[@ActionJackson2360]

The motor favoring the passenger side is gm's way of keeping the u-joints in contant motion. If they're to straight the needle bearings wont stay lubricated and will dry out causing them to wearout quicker.

[@kimberlywilliams9757]

The square bodies are taking over the KZbins! 😁👍

[@John-Laird]

No body better than a Squarebody.

[@br549200]

Obligatory comment!

[@johnrice7350]

Love my shortbed square body pick up.

[@mblake0420]

​@John-Laird you sure? I absolutely would protect mine with my life.

[@John-Laird]

@@mblake0420 I should clarify. There is no body better than a Squarebody.

[@okladoma9782]

I don't know if some people realize the technicalities involved in setting the engine. I for one was impressed. Doing it all alone is no easy task. Kudos Puddin

[@PeterBrock427]

One man working mo-chine

[@fossilcreekkennels1973]

BEEN WAITING ON THIS DAY FOREVER !!!!!!!! IT'S ABOUT TIME PUDDIN POPS GETS OL ROY BACK ON THE ROAD FOR HIS ENJOYMENT

[@newsferd1638]

Puddin, Love the square body! Wanted to say I'm impressed with all the de burring you do - definitely a great idea to knock off all the sharp edges. My old shop teacher use to walk around inspecting our work and put a check by students name on a white board if he found any sharp edges - 5 checks and you flunked! Kept us on our toes but even today I knock off all sharp edges on my projects...

[@That70sChannel]

This is heartwarming. You're setting an important example as a son and as a father. You'll never regret time reaching out to your pop. Lately, I'm drawn to Malachi 4:6.

[@richvideo01]

Building a flatbed on a project would be cool to see. I’ve always liked flatbeds

[@RowdyCStuff]

Hate to see when the AC box is removed when they can be reused easier and cheaper then vintage air.

[@OldJeepGarage]

Theo the Shop Inspector is on it!! Good job buddy!

[@poppinfresh5261]

Puddin Pops listening to TechNine might be the best thing in the world

[@iananderson8911]

Regarding the last few minutes. Most of the factory setups are a “returnless” system. They have an in tank regulator and generally a dampener on the rails somewhere. So there’s guys that will put a regulator on the -4 valve on the end of the stock rails and then just run a full new return back to the tank

[@dalesmith112]

Hey Jacob... I live in Northwest Louisiana, near Barksdale Air Force Base. I think the connection between you and our area is super C😎😎L Thank you for your service and thank you for the generosity you display with some of your builds by giving back to others. You're a genuinely good dude. 😇

[@OldJeepGarage]

Your description of the muffler sounds made me chuckle.! I'm looking forward to hearing the new exhaust rev up when you get it all put back together! Cool project Puddin!

[@ghosteh6503]

I love how much Puddin loves Theo. He is an amazing pet owner. Even had the AC on for him while towing and pushing ol Roy

[@backyardsounds]

I always enjoy my visit to Puddin's garage. It's like visiting an old friend.

[@gregoryshearsmith6774]

i been watchin an waiting for that truck to come in the shop ! I used to have my dad's truck, a 1980 3/4 - 1 ton. full floating axle in rear and warn locking hubs on the front. the box, a full steel "rock box". sure miss them both

[@geebopbaluba1591]

Hey Puddin make sure and check the area between the steering box and the frame because of cracks and you can look up a fix where you weld in some fabricated frame stiffener’s. It’s for piece of mind.

[@Ron_Masterjohn]

❤The Puddin & Theo Show ❤ Always love Mondays.😊😊

[@kimberlywilliams9757]

You should have painted the firewall when the motor was out. 🙂

[@sinistertrucker]

Been waiting on this video for years it feels like. Even got upset when you put that 350 in the hot rod. I ain't mad no more. Can't wait for the next installment.

[@patbarron3482]

I’m with puddin pops on the looks of old Roy. Always liked short wheel base with step side bed.

[@teresalivingston975]

I was waiting for ole Roy

[@mrV8manifold]

Oh yeah for Ol’ Roy!

[@carykennedy9467]

Ol' Roy lookin' good! Do what you do and never change!

[@KirkTimmins]

Awesome truck glad to see your fixing up old Roy

[@ranwhenparkedgarage]

That little plug by the steering box is for the brake light on dash. Let's you know when low fluid.

[@griefer_jesus_here]

Not for when it’s low but when the pro port closes off front/rear brakes due to a leak and loss of pressure. The port will close the ground switch and cause the light to come on and tell you that something is wrong. Found out the hard way how those work when I blew a brake line

[@ranwhenparkedgarage]

@@griefer_jesus_here That makes more sense. Thanks

[@ranwhenparkedgarage]

I know I'm talking to the past but ICT billet and Dirty Dingo make better engine mount adapters that use the factory clamshells. Also CPP makes manifolds that are way better on the passenger side. I have a video of my LS Suburban swap on my channel that I think show both.

[@jamescardwell3254]

Pudding Pops is going to love this truck when it's finished. No doubt he supports you and what you do. Not sure what it is exactly about having dads support, but it sure makes you feel better inside. GOD bless, and THANK YOU FOR YOUR SERVICE TO OUR COUNTRY.

[@RandyKopis]

17:35 That rig is the DEFINITION of a "bucket of bolts"! 😂

[@alockpro]

Every time Puddin says, "I remember, back in the day..." I expect the screen to get wobbly, and the flashback sound to play.

[@johnd21]

Ole Roy is lookin GUD! So glad to be back on a build. Really looking forward to the Cummins build too. Ole Roy is a close 2nd. Can’t beat that quality pfs content as well as that merchandise!

[@shloopter30]

My Pit gets those bumps every spring. They last through early sumer for her. Lots of Benadryl.

[@prevost8686]

Theo walked up to the front of that truck and looked at the hood and shook his head “nope, I know Old Roy when I see it and that ain’t Old Roy! “ Turned around and walked off. On the a/c. You still have the evaporator box and you could use a LS high mount for the compressor and have you some lines made to connect to the condenser and evaporator box. Even if it needs a new condenser and evaporator you’re still gonna come out cheaper plus replacement parts for the system are available everywhere.

[@RandyKopis]

That little white Toyota 4x4 is screaming for a small block Ford. They're a pretty good fit, I saw a few back in the 80s.

[@bigjay6743]

I love that truck always since I was 5 years old has that been my favorite Body style love the big tires and the side step just makes it look amazin I get people are saying those aren't big tires but being born in the 70s trust me those would have been big tires back then.

[@rickydonahue1586]

Dang it Puddin ya did to me again! When you started pulling up your shirt I spit my soda all over my phone and dang near choked to death laughing!!!😂😂😂

[@TheSandman614]

Theo is such the micro-manager. Give that good boy a treat! Good to see Ol Roy getting some love

[@GSXR750ization]

My personal favorite style. I've heard people call them bubba trucks and stuff more recently.lol . Definitely just what I like. Awesome video!

[@arizonarider6998]

GOT DANG !!!! That model A sitting there in the background looks cold blooded !!!

[@rogerpeter6859]

You youngsters with your slice and dice. We used to have to cut metal with a hacksaw!!!

[@ncjohn3429]

When I was a kid we had to make our own hack saw blades . It was brutal . 💥

[@Mardy72]

Back in my day we had to use a sharp spoon

[@ncjohn3429]

@@Mardy72 rookie

[@MrXdaltonxp]

Theo did a excellent job inspecting everything after the wash job. He is doing great as your mechanical support pup!!!

[@groundhog8148]

Yes my favorite video man is on for another week 👍🏻💪🏻🇨🇦

[@Smalls_Childress89]

Hot Damn It's Time For Another One 🤘🏼

[@jamesmcdonald5868]

The reason why your freezer froze up to the fan is the fact that you had things on top of it most likely or the gasket for the door isn't ceiling right.

[@Kncklhed]

Corvette fuel filter with return. It provides the return to the tank, and pressure regulation all in one.

[@Frank-ev6fg]

Love your channel, I’m a car guy to ,( 40 year retired body man ) you need to check out under dash heat and air fits on line . Start at $550.00 . I used vintage air in my 70 chevelle so I know the price of them. Learned about the cheaper ones from Rust hoarded garage channel. Always need different options.

[@kerryhickman2235]

Loving the build!! Another way to make loading the engine easier would've been to just pull the trailer on the concrete or on the concrete in front of the overhead door!!😂😂Thanks for the awesome content & all of the hard work you put into these videos and making us feel like part of the family/team!!

[@ryanreaves1203]

You can run the corvette fuel filter/regulator right off the fuel rail. For the exhaust manifolds, you can cut the ends off and weld v bands on because they have a lot of steel in them. A good transmission cooler that is cheap is the 40k gvw cooler on eBay or Amazon.

[@johnstancato8785]

Heck yeah puddin pops is getting some Wheels 👍👍

[@oleredcustoms]

The sleeve on the pump soaks with fuel to keep the pump cool when the fuel level is below the pump.

[@Silent-Lucidity]

I webt on another KZbin topic binge, but I had to drop in and see how Puddin was doing. This will be a cool build, and your dad is going to be really happy! Take time for yourself and your family. It does the spirit well!

[@richardbates2367]

That's the brake pressure warning switch wire that causes the brake light in the dash cluster to illuminate when it has brake issues

[@FrederickHopkins-xb6me]

While the hood's off, oil the hinges. Mortske says so.

[@Mardy72]

No one listens to that grumpy old man

[@launceherron]

Puddin time

[@jayinmi3706]

I think I'm most impressed that you didn't bust any exhaust manifold bolts! lol

[@johnkennedy2505]

The LS & Vortec both can come without a regulator / return line, the ECU turns the pump off/on to regulate the fuel pressure.

[@eugeneholling6828]

You doing such a good job just didn't want you to forget to fix that frame where it was welded together you should also check where the steering box mounts make sure that framing cracked right there

[@psully311]

So glad to see ya box in that butt weld frame! Gonna be a ripper!

[@jameswhetsell6651]

That’s awesome you are doing this for dad

[@Rambone169]

Great progress! Your dad will love this truck.

[@jakejonesy9275]

Instead of pushing your car around the shop…. I just found out it’s easy to roll a tire with your hands and the car moves easier 👍

[@ktmcc4360]

Puddin Pops deservers the best. You got him. Your a good man .

[@whatsoutthere6822]

The grille says it's a '79. In '80 it was egg crate squares. Probably swapped.

[@larryd.214]

Thanks Puddin! Glad to see the action on ol' Roy! Great job!

[@sokoloft3]

Since its a 4x4. I'd love to see you convert a old AC compressor into a air compressor. I haven't seen it done before but apparently its a old trick guys used to do.

[@scottwhitmer2034]

I believe the sleeve on the fuel pump is just a sound deadener!

[@mrpopps6322]

Doing good things for Puddin Pop, love it. Love the connection you have with Theo to.

[@shaggydane7197]

'79 ... Had dually like at... '80 had the square ish head lights. Chrome trim around the blinker/running lights is a good idea of a '79

[@AHomelesschannell]

My Brother drove a 1980 scottsdale, great truck

[@keithbarron75]

I vote to paint it with the new sweet patina spray on bed liner. Get the version you can tint and add some green.

[@-RyN-23]

1:09:32 who else was expecting him to go " one.. two.. buckle my shoe .. 3..4 " Lol those who really watch puddin an been here awhile will get what I mean. Puddin is a funny guy an his random plays on just anything are a big part of who he is an his natural comedic humor One of the best people to watch imo. Supper good guy, great parent and husband. Not to mention he's super greatful for all his fans have allowed him to achieve an thus providing for his family all while being himself and building cool stuff along the way including teaching us anything he feels may be useful to his audience

[@richardenright3170]

You are a good son Puddin, Puddin Pop is a lucky dad.😊

[@briansantefort]

OL Roy needs some Cab lights up on top that roof! Show us a project putting some of those new ones on!

[@briansantefort]

They have solar ones! That work off bluetooth!

[@GregoryJohnston77]

Jacob you are an amazing guy taking care of your dad man, i know it helps you out too having content for the channel, but your a great fsther, husband and SON. i wish my dad was alive, he used to teach me in his shop he was a mechanic also, but he died when i was 15 so im pretry much self-taught. I got all of his tools when he passed away, he worked in a mine as a mechanic so i got thousands of high dollar tools when i was 15 i still us3 his tools to this day.

[@kamoboko86]

Next time you got a flat tire, Take it off the rim and spay Flex seal rubber spray on the inside. You gotta clean it with alcohol first though. You'll never have another leak again.

[@CavanalK5]

This would be prime to do the ORD or DIY4X steering brace on the frame at the steering gear. Or for you being a fabricator, a Do it Puddself one. Also theXJ steering shaft upgrade for well under a 100 bucks and be rid of that rag joint.

[@nselstudio3336]

Those dang square bodies have very well secured fenders. I put new fenders on my 79 and I was like damn this sucks

[@freddyhaller2458]

That’s a great looking rig. Puddin Pops is going to be riding in style

[@CavanalK5]

I’m in the hospital in Bartlesville recovering from another back surgery. iPad + earbuds so I don’t wake my beautiful bride who’s asleep in the crappy-est “sleepcliner” in the USA, it’s 2:53am and I’m watching Puddin LS Swap a squarebody that has an OD green (or No-D) Green paint job. Kinda making me want to LS swap my M1009 Blazer instead of Cummins….maybe. It might be the Dilaudid, but I’m in high cotton. ❤ Thanks buddy, you be gettin’ me through once again. 👊🏼

[@topher2381]

Teck tip you should mount a winch in your garage to help you pull your cars in

[@captdaveclearedtoland8876]

I love that truck