1983 Foxbody Mustang E303 Flowmaster Super 44

1983 Foxbody Mustang. 306 with GT40 heads, E303 cam, BBK Longtube headers, BBK O/R H-Pipe, and Flowmaster's American Thunder Cat-Back with Super 44's.

[@carguycorner7879]

Love the sound of Flowmaster's on a 5.0.

[@taylorkohla1]

I love it. Turns heads everywhere. Flows on a 5.0 is unmistakable.

[@carguycorner7879]

flows on a 5.0 reminds me of high school.

[@whipshinedetailing]

Classic

[@GABRIEL916100]

sounds fucking amazing

[@taylorkohla1]

Thanks!

[@93SVTMustang]

Your foxbody sounds good, especially with the long tube headers.

[@billygross3207]

I had an 88 GT With a 306 F303 cam, Edelbrock Rpm Intake, Victor Jr. Heads, shorty headers with 2 chambers and 410 gears. Your car sounds good!!

[@jman0346]

best foxbody I've heard yet

[@taylorkohla1]

Thanks!

[@jman0346]

+taylorkohla1 I have an 84 with an e cam I'm building. but it doesn't sound that good.. yet haha

[@crash542]

I've never heard a e303 rip that quickly!!! Turns up nicely!!!

[@crash542]

Throttle response is awesome!!! Just bought a 92 GT I'm planning to build a 347 for and I hope it turns rmps this quick.... Love the sound!!!

[@DominatorGarage]

@@crash542 its efi vs carb. Efi E cams have the nasty idle problems. Carb sounds 10x better because it hits harder

[@crash542]

@@DominatorGarage gotcha!!! One of the best sounding stangs I’ve heard by far!!!

[@KingJT80]

@@DominatorGarage its an 83..he said it had a holley 600 on it!! no EFI on those years

[@DominatorGarage]

⁠@@KingJT80no shit..I was talking about the comment above on the 347 in a 92…read

[@stazym69]

Doesn't get any better than that.... EarKandy!!

[@backwoods6334]

You done pissed her off for waking her up 🤣🤣sounds awesome

[@taylorkohla1]

Thanks man

[@imhappyandyou.4003]

That's the sound of true happiness right there!. LOL Beautiful car dude enjoy the hell out of it!. 🍻✌️

[@taylorkohla1]

Thanks! I certainly do.

[@ryan.vision]

Car sounds awesome!! Hoping to pick up a 67 with 5.0 303 cam tomorrow.

[@IntelligentHorseworldofrandom]

Those exhausts do good to the old foxbody. Ahhhh, a genuine muscle car sound, how its SUPPOSED to. Lovely! Vibes of the 70s muscle giants too!

[@orlandojohnson5742]

Yeah Boi !!! I have an 89 with an E303! Summit headers/exhaust ! Time to get this fuel pump replaced!! This is my motivation hearing other mustangs! Yeee haaa 🤠🚔🏃🏽‍♂️

[@GeekdOut]

92 coupe here, bbk cold air intake, e303 cam installed and (gt40 intake, underdrive pullies, aluminum drive shaft, bbk equal shorties, bbk h pipe, dumped flowmasters ... all awaiting installed) hope it sounds similar to this!

[@taylorkohla1]

Thanks man. Sounds like an awesome build!

[@TheOfficial_InsaneStang]

Mine has everything the exact same! Lol should be firing it up tomorrow for the first time too! E303 is sick!

[@m3tvm3tvyoutube34]

Jesus CRIMONY. I have a fox with an xe270 and flows that doesn't sound HALF as good as this damn thing. This thing is wild!!!!!

[@taylorkohla1]

Lol. Thanks man!

[@gennarohock1572]

Sounds so crazy when u hold on it for a few seconds sounds like a turbo that’s all cam hitting when u let go of the gas like that

[@rafaelgamboa4321]

Wow!! very nice sounds.good job.

[@ulose9395]

Ford should have put Flowmasters on every Foxbody right off the assembly line.

[@daddydaughterrepairs9091]

Sounds great

[@teamoney7350]

Legendary

[@hananderson4940]

love that sound.

[@windell0121]

Fun and streetable!!

[@chrispynov1963]

For an E cam, it sounds pretty pissed off! Nice rowdy idle

[@taylorkohla1]

Thanks man!

[@grannationalboy]

That added compression sounds nasty

[@jennifercampbell59]

Added compression? What you mean.

[@grannationalboy]

@jennifercampbell59 adding compression to an engine changes the sound. With the motor being a 306 vs a stock 302, a dome piston was probably used

[@robertwhirrett]

I’ve had 4 fox bodies. Gotta get another

[@sarahrosenberg4600]

Pretty cool!!!👍

[@jaylongton]

Sounds sweet!

[@taylorkohla1]

Thanks man!

[@RaulMorales-bg2pm]

The best sound😍👍👍👍

[@taylorkohla1]

Thanks!

[@eee-tb9cl]

This exhaust makes me want to smoke a cigarette 🚬

[@mahon055]

Damn that sounds good

[@drjohnsonhungwell5115]

Mine sounds about like this I have an ex Georgia State Patrol unit 798 post 44 Forsyth .

[@genericautovlogs9484]

Ahh, Georgia❤️

[@jasonmattison6734]

Thing sounds nasty!!!

[@gt350govroomm9]

Dis bitch sounds fucking good i cant wait to build mines and just cruise bro hearing this thing round town ppl be shocked

[@EASTCOASTIMPERIAL]

What is the setup? I didn’t know 44s sounded that good.

[@taylorkohla1]

306, GT40 Irons, E-303, BBK Longtubes, BBK O/R H-Pipe, Flowmaster American Thunder Cat Back.

[@anondusery1271]

late comment, but was there any port work done to the heads?

[@Rumeel12708]

these or the super 10 serious flowmaster

[@FortyTwoAnswerToEverything]

what happened that everyone got pussified and started using x-pipes and now sound like crap. I love this old fashion setup

[@taylorkohla1]

Thanks man!

[@ponyboywils9950]

Cause you make more power with a x pipe

[@thomasgarman7662]

Was the cam degreed or did you fly it dot to dot?

[@taylorkohla1]

We degreed it when we were assembling the block.

[@FranciscoLopez-ss7kz]

Is this stock bottom whit a cam swap..???

[@taylorkohla1]

Stock bottom 306, but milled GT40 irons and an e-cam. Makes 10.2:1 compression. Car is turboed now.

[@jaggedsleepy1229]

Wow

[@aj2no17]

sounds fucking sick

[@dejuan71]

You ever had a bad baffle. I just put these on my charger keep hearing stories of loose baffles

[@taylorkohla1]

dejuan71 Never had an issue with them.

[@dejuan71]

I'm loving mine so far

[@DominatorGarage]

First issue is that it's a charger and not a fox....lol, what's your charger? Love the mopars as much if not more than foxes

[@fourwheelerjock]

Car sounds good! What compression?

[@taylorkohla1]

Thanks. Right now it's 10.2:1.

[@fourwheelerjock]

taylorkohla1 Are you running the speed pro forged pistons from the rebuild kit from summit racing? Lol. Bc that is the exact compression mine will be. Mine will have a edelbrock air gap intake and F303 cam tho

[@bryanroupe8646]

Sounds good for a E cam. I had a E cam in my F100 and it wasn't that throaty. Are you sure that those are super 44s or is that what the previous owner told you ? They sound pretty good. A lot like the original 40 series.

[@taylorkohla1]

Nah I built the car lol. It had the American Thunder Cat-Back on it and those come with the Super 44s.

[@bryanroupe8646]

Ok sounds pretty good man. 🤘

[@WhoDat-cc8zo]

Partner you still got the fox body?

[@taylorkohla1]

Yessir

[@WhoDat-cc8zo]

chrisearles113 Awesome! I have a 01 GT premium with 90K. It’s on my channel if your interested in checking it out dated 2/22/20.

[@imhappyandyou.4003]

I should know this and I feel really stupid for asking but what exactly does E303 mean?.

[@superbannana5]

Bbk longtubes fit with gt40 heads?

[@taylorkohla1]

Yes, they fit perfectly.

[@superbannana5]

+taylorkohla1 cool thanks I wasn't going to buy them because I heard they wouldn't fit my long tubes

[@jacobmcelroy6907]

Are you running 1.6 or 1.7 rr and what's the valve lift

[@taylorkohla1]

They were Crane 1.7's. Unsure the valve lift, its been a while lol.

[@ZXDF51]

Sounds awesome! Do you have anymore vids of this Fox?

[@timspeight9334]

Is it carburetor

[@juantabby4787]

Stock block or roller cam? Still carbed?

[@taylorkohla1]

'95 block, full roller. E-cam, Crane 1.7 rockers.

[@feliciaheckman5041]

Fuel injection or carb?

[@taylorkohla1]

Felicia Heckman Carb

[@crash542]

chrisearles113 that explains the awesome throttle response that had me amazed lol.... Never heard a efi car rip like this

[@warrenjoe5465]

What's the compression ratio.

[@taylorkohla1]

10.2 : 1

[@warrenjoe5465]

taylorkohla1 any idea on power. Did you use dome Pistons or flat top.

[@taylorkohla1]

Stock bottom end with flat top .030 pistons and milled heads.

[@elchingonracinggarage4649]

I had a pintagra with a exhaust leak

[@saucybaka4439]

An*

[@WheelchairDriveby]

Is it straight pipes into the 44

[@taylorkohla1]

Yep. No cats and an h-pipe into the 44s.

[@gennarohock1572]

U have a turbo or supercharger on this set up

[@taylorkohla1]

Here it's still N/A. It's turbo'd now.

[@miguelangelmijaresromo3706]

@@taylorkohla1 have 1 or 2 flowmaster super 44 on this video?