Tap to unmute

1986 Ford F150 lowering 2 inches

  Рет қаралды 19,744

Christman Garage

Christman Garage

Күн бұрын

Пікірлер: 42
@Kevlarel84
@Kevlarel84 Жыл бұрын
I liked the stock ride height. The stance was perfect with those tires.
@Nick915ford
@Nick915ford Жыл бұрын
Can you please measure from the ground to the body above the front and rear tire please? Love what you did.
@cesarnunez7587
@cesarnunez7587 Жыл бұрын
Nice truck brother looks good
@eddieboy9349
@eddieboy9349 Жыл бұрын
Looks way better lowerr verry cool truck
@ChristmanGarage
@ChristmanGarage Жыл бұрын
Thanks👍
@-gravestonepros
@-gravestonepros Жыл бұрын
No chance I'm trying this myself but it was fun watching you work!!
@ChristmanGarage
@ChristmanGarage Жыл бұрын
Awesome👍 glad you enjoyed it!😁
@brokewheels5
@brokewheels5 Жыл бұрын
Clean truck! Did removing the overload cause axle wrap?
@joemcguire256
@joemcguire256 Жыл бұрын
Wish I could find bulls that nice. Mostly rusty junk around here. That's a high option f150. Factory sway bars and 9".
@chrishigdon1070
@chrishigdon1070 11 ай бұрын
nice doing my 80 f-100 right now thanks for the video
@ChristmanGarage
@ChristmanGarage 11 ай бұрын
Awesome! Good luck👍
@holoholohaolenokaoi2299
@holoholohaolenokaoi2299 Жыл бұрын
can you please be more specific on the results of just the helper leaf? how much drop did you get? i'm old and want to load motocross bikes into the bed.
@ChristmanGarage
@ChristmanGarage Жыл бұрын
just the helper leaf didn't give me much only about an inch or so
@holoholohaolenokaoi2299
@holoholohaolenokaoi2299 Жыл бұрын
@@ChristmanGarage thanks🤙
@UWPcustombaits
@UWPcustombaits Жыл бұрын
Nice edit on this one ! I hope this comment helps your algorithm.
@jorgegonzales878
@jorgegonzales878 7 ай бұрын
What year did those rims came from?
@josemrodriguez372
@josemrodriguez372 Жыл бұрын
I just picked up a 81 bully, I wonder if there's a co.out their that offers a kit
@joemcguire256
@joemcguire256 Жыл бұрын
DJM has 3/5 and 2/4, Belltech has 2/4. You can use newer beams with newer spindles.
@carlozgonzalez232
@carlozgonzalez232 5 ай бұрын
Do you recommend replacing the shocks while doing this drop?
@ChristmanGarage
@ChristmanGarage 5 ай бұрын
We didn’t replace the shocks and haven’t had any issues
@Nick915ford
@Nick915ford Жыл бұрын
Damn good video. Thank you.
@augustshades
@augustshades Жыл бұрын
hey that duck on the hood is from that movie deathproof. but what is it actually from?
@ChristmanGarage
@ChristmanGarage Жыл бұрын
Not familiar with deathproof but it was in the movie convoy it was the rubber duck’s hood ornament on his truck👍
@williamhollowell4777
@williamhollowell4777 Жыл бұрын
Are those 15x10 wheels on the back. What is the backspacing on the wheels
@ChristmanGarage
@ChristmanGarage Жыл бұрын
They are stock wheels off a newer year model 15x8, I have never measured the backspacing sorry.
@WilliamMunny-d8s
@WilliamMunny-d8s 4 ай бұрын
cant a guy get FREE Rear lowering just by removing the front leaf spring perches and either just mounting them 3 inches higher on the frame with new holes and bolts? or similarly remove the spring perches and swap them side to side and upside down if that makes them fit better and still mounted higher on the frame?
@WilliamMunny-d8s
@WilliamMunny-d8s 4 ай бұрын
my truck has about 3 inch rake/higher in the back is why i am asking and it needs a couple inches lowering back there , since it will unlikely ever haul enough weight to max out GVWR
@ChristmanGarage
@ChristmanGarage 4 ай бұрын
You might be able too but would be a lot of fabrication and those brackets are riveted to the frame you would need to cut the rivets out, Lot of work👍
@Jbmemace
@Jbmemace 2 ай бұрын
Can you tell me where this truck is located please sir
@EdwinHerrera-ew7rk
@EdwinHerrera-ew7rk Жыл бұрын
How did you bend the coil spring to give it the D shape ?
@ChristmanGarage
@ChristmanGarage Жыл бұрын
Heat one small spot with a torch and bend it over👍
@mblake0420
@mblake0420 Жыл бұрын
How does it ride?
@ChristmanGarage
@ChristmanGarage Жыл бұрын
Rides just about the same just a little stiffer in the front but not really enough to notice
@mickeythompson1562
@mickeythompson1562 Жыл бұрын
you got it perfect!
@williamstafford9760
@williamstafford9760 Жыл бұрын
Check out that fresh haircut
@TheREALOC1972
@TheREALOC1972 8 ай бұрын
I have an 80 F100 that I'm wanting to lower.
@horsied
@horsied 8 ай бұрын
hell yeah
@JaimeAguilar-yg7jy
@JaimeAguilar-yg7jy 9 ай бұрын
👍👍👍🤙🤙🤙
@carolchristman2139
@carolchristman2139 Жыл бұрын
You made it look to easy 🤔
@Fog66
@Fog66 Жыл бұрын
Lose the toolbox and rails.
@carolchristman2139
@carolchristman2139 Жыл бұрын
I can't its my work truck and I keep a chain to pull EV 😂😂
@STUIPEDCHICKEN
@STUIPEDCHICKEN Жыл бұрын
it looked better before
DJM Lowering Kit Install On 1996 F-150
20:46
ICS Ivan
Рет қаралды 66 М.
Reviving the Past: 1982 Ford F150 Interior Renovation Transformation!
21:37
John Bull Outdoors
Рет қаралды 99 М.
I'VE MADE A CUTE FLYING LOLLIPOP FOR MY KID #SHORTS
0:48
A Plus School
Рет қаралды 20 МЛН
Lowering the rear of a Bullnose OBS F-150 with a Flip kit & shackles
23:27
Florida Cracker Kustoms
Рет қаралды 26 М.
Treating this Classic Right! We Lift & Modernize this MINT 1989 F150
11:45
Mount Zion Offroad
Рет қаралды 12 М.
Ford F100 Pickup New Daily driver???
17:06
Howlin' Wolf Garage LLC
Рет қаралды 10 М.
I HAD TO TRY THESE OUT!
10:22
lmfscrew
Рет қаралды 36 М.
1983 Ford F100 Bullnose Part 3!! | Dash Install
12:26
Select Your Tools
Рет қаралды 18 М.
Ford F150 Rear Shock Replacement
18:44
AJ “Figgy” Pierce
Рет қаралды 188 М.
This Is The Reason We Can't Have Nice Things!
41:35
Fab Rats
Рет қаралды 52 М.
3 inch Lowering Springs OBS Bullnose F-150 1980-1986
6:02
Florida Cracker Kustoms
Рет қаралды 19 М.
I'VE MADE A CUTE FLYING LOLLIPOP FOR MY KID #SHORTS
0:48
A Plus School
Рет қаралды 20 МЛН