My 1988 Toyota pickup would start but only run for a couple of seconds. This is a video on what my root problem was and then some adjustments made after i got it to run.
Пікірлер: 20
@Daniel_Antonio_Arellano7824 ай бұрын
Thanks for the video years later, but it helped me now. One thing I noticed that many times it can be the idle air control valve located at the throttle body. It's worth a try for you guys if you're still having idle problems.
@dougmcgoon29952 жыл бұрын
Thanks! I still don’t know what’s wrong with mine, but good info on yours
@lensmanicfeleven18477 ай бұрын
interesting at ECM fixed the problem...Thanks
@jdurr8362 жыл бұрын
Thank you I’m having the same problem with my 1989 Toyota pickup it’s cutting off while idling
@cobracommander63663 ай бұрын
ECM is basically the computer ain't it? If so, if you replace it youre going to have issues getting it smogged for those living in states that have that
@copperhead5216 Жыл бұрын
My 1992 Toyota truck want start. What is the ecm?
@randallstewart84876 ай бұрын
It stands foe Electronic Control Module!
@MikeJones-fd9kt2 жыл бұрын
Literally having the exact same problem. I’ve checked everything. But I haven’t changed the ecu. I also haven’t took the top off the VAF. Should I grab an ecu or adjust the vaf first? This is driving me crazy!!
@brianp81442 жыл бұрын
If you can find a ecm on the cheaper side I'd go for that first, I'm not too keen fooling with the afm. Look by your antenna they're notorious for leaking or try to find a burnt spot on yours beforehand. What exactly have you done to your truck to try & solve your problem? Don't give up, you'll get it figured out. Best of luck.
@zimarokas2 жыл бұрын
try with the Vaf first
@MikeJones-fd9kt2 жыл бұрын
Just an fyi for anyone having this problem…it was the ECU!!
@zimarokas2 жыл бұрын
@@MikeJones-fd9kt so you solved the problem ?changing the ECU?
@MikeJones-fd9kt2 жыл бұрын
@@zimarokas yes that fixed it. Before I changed the ecu when I’d turn the truck to the on position instead of the check engine light coming on and staying solid it would come on and “flicker” after literally a month of research I found a guy that said that a bad ecu would cause that. So I bought one, plugged it in and the check engine light stayed solid in the on position. it literally fired right up after I tried to start it!
@kimschmidt1062 Жыл бұрын
Ya, what is a ecm, and took cap off VAF, that need thing wont budge.... Not normal?
@jakejones99132 жыл бұрын
Have you figured out the TPS problem?
@4wheels2692 жыл бұрын
So wait the cold start injector on top of manifold wasn't sending around to the cold start timer switch is that what you're saying or down to the ECM
@4wheels2692 жыл бұрын
Ground I ment
@elisecody6719 Жыл бұрын
So I think I have the same problem. I started it one morning so it could warm up I went back inside and once I can outside I just shut up. I tried to start it up again but it would just crank