Great video I’m gonna order theses pins for all 4 doors on my 1996 f350
@mikepoint49835 жыл бұрын
Great video I’ll be able to refer to this video when I repair my 1996 F250 passenger door . Cheers
@krisdunn76742 жыл бұрын
This was extremely helpful, thank you brother!
@Velvethamma2 жыл бұрын
Glad it helped!
@billlangdon1936 жыл бұрын
Thanks for another great video. That truck is in amazing condition for an Ohio truck. I've seen 2012 trucks in worse shape. Good to have you back on the tube. PS don't put that plow away just yet 🌞❄⛄
@nickfortunato29384 жыл бұрын
Thanks for the video, like to see pics of the truck when it's done
@RedneckGarage6 жыл бұрын
Nice repair - seen so many old Ford with floppy doors :)
@joerootsr6 жыл бұрын
Good repair. Good tutorial. I sure wish the newer vehicles had good hold open hardware like this truck. Most of the dang things won't hold open on a downhill slope with a tailwind!
@Velvethamma6 жыл бұрын
Joe Root I don’t know why newer vehicles don’t have much detent in the hinges...
@stephenfrye898 Жыл бұрын
😂🤣😂
@dateatorjr96716 жыл бұрын
That bed sure is handy for tools and supplies!
@Velvethamma6 жыл бұрын
da teatorjr Lol. It sure is
@_BAD_MERC_5 жыл бұрын
Nice video!!! I got lucky with my F-650. The entire fiberglass hood flips out of the way.
@jasonsupafly6 жыл бұрын
Good to see ya makin' videos again!
@Velvethamma6 жыл бұрын
jasonsupafly Thank you
@richardclark43834 жыл бұрын
Thanks! I wish you video taped how you filled in the hogged out holes though...
@Velvethamma4 жыл бұрын
Richard Clark Holes weren’t that bad
@richardclark43834 жыл бұрын
Velvethamma gotcha. The holes on my ‘73 definitely are that bad
@JerrysThisandThat6 жыл бұрын
You pin popper you. Lol. I have new bushings and pins for my Firebird and I would guess they probably come apart and go together the same way so thanks for the how to brother.
@Velvethamma6 жыл бұрын
Jerry's This and That This style is probably one of the easier ones. The GM ones like yours have that spring to deal with
@davidmcnerney30485 жыл бұрын
My f350 hinges are shot after doing this 4 years ago.Thought about having some bushings made from oil lite like I bought for my ski doo control arm bushings.
@MrFireman1646 жыл бұрын
Nice job
@Velvethamma6 жыл бұрын
MrFireman164 I like these easy ones
@MrFireman1646 жыл бұрын
Velvethamma absolutely
@kman-mi7su4 жыл бұрын
Gotta do this to my 1988 F 250.
@lindyp384 жыл бұрын
Excellent
@simplysouthern57255 жыл бұрын
Those new bushings don't last long! 2 to 3 years later I need another set.
@NWO415084 жыл бұрын
Good info. What’s up with the video flickering?
@charlesbrigette58812 жыл бұрын
Is that kit standard i need for my daihatsu rocky
@Velvethamma2 жыл бұрын
Vehicle specific
@charlesbrigette58812 жыл бұрын
@@Velvethamma i have a daihatsu feroza or rocky 1990mdl and i need the door hinge kit for it
@Velvethamma2 жыл бұрын
@@charlesbrigette5881 I would check online. I am not familiar with that vehicle
@sixpacksandsrts91226 жыл бұрын
what's up. Mr hamma
@Velvethamma6 жыл бұрын
Keyboard warrior Hitman What’s up!
@bigmurph14476 жыл бұрын
Is eastwood paint good to use?
@Velvethamma6 жыл бұрын
big murph I have never used their topcoat paint. Only their internal frame coating and cavity wax. I have heard it is a budget type paint so take it for what it is worth
@bigmurph14476 жыл бұрын
Velvethamma ok thanks what type of paint would you use to paint a truck with
@Velvethamma6 жыл бұрын
big murph Depends on how long you want it to last. I use DeBeer and Valspar mostly. It also depends on budget for your project. Some basecoat colors can be overwhelmingly expensive and the clearcoat too. It’s common to have $1500- $2000 in paint and primer material for a restoration job using top shelf products.
@bigmurph14476 жыл бұрын
Velvethamma it's for my work truck. But I don't want it to be faded in 5 years. What would you use or do. Where can I buy the paint at
@Velvethamma6 жыл бұрын
big murph Probably the best thing to do is go to your local automotive paint supply store and see what they carry. I’m not a big fan of mail order paint. I like having the support of an actual local supplier.