1992 Toyota FJ80 Window Issues

[@Ghostrider-71]

Wow, my windows are much slower. Lol. I need to do this with mine. Just another maintenance item. Thank you for posting.

[@InocenteSandoval]

Thank you for posting this. Will be doing this as my next maintenance

[@TheDarkmark79]

any chance you could do a video of the window run replacement? I need to do mine but I'm scared to tackle it.

[@noelcastle3986]

I did away with the window attachment rubber, I cleaned the track out thoroughly filled it partially with sikoflex taped the glass to the track making sure its in the correct alignment and position left it fir a few days to cure and reattached the window into the door . This method is used by window replacement companies they don't fit the factory rubber. They window companies refit it before it's cured drive the window to the top and tell you not to use it for 4 days. I prefer to let it cure first then refit it .

[@robertomartincompanyppp]

Thanks very much brother

[@aaronhogan2371]

Don't use grease as it attracts dirt and dust! A much better product is dry lube spray wax. You are 100% correct to pull the rubber seal and scrub it out. I also recommend that you strip down the electric motor. Also possible is to swap the motors Drivers front to Passenger rear and vice versa.

[@shanevonharten3100]

Not an icebergs chance in hell id put grease inside the window rubber. It will fill with dirt and grind everything to bits. Insanity is real

[@ITS-FALCO]

Its easier than it looks

[@ITS-FALCO]

Keep the rubber in the sun for some time

[@crazy-sz6pv9ez2s]

Привет,уменя также было,кстати тоже белый левый руль.Заходи в гости. Land Cruiser 55