1995 Seadoo GTX Fuel System Removal for Beginners

Embark on an exciting adventure with us in this latest episode as we dive into the mystery of whether the old Seadoo will roar back to life or remain silent. Join the journey as we skillfully dismantle the Mikuni Carbs, revealing the surprises that often lurk within. The exploration doesn't stop there - we meticulously disassemble the entire fuel system, including the gas tank, unraveling the secrets hidden within each component.
This 18-minute escapade is more than just a test of mechanical prowess; it's an invitation for you to come along for the ride! Take a break from your routine and spend these moments with us in the garage, where every turn of the wrench brings us closer to solving the Seadoo's enigma. Your time is precious, and we promise this journey is a worthwhile investment.
As I navigate the realms of filming and editing, bear with me on this learning curve. Appreciate the dedication and effort poured into crafting this 18-minute spectacle. I assure you, with each video, my skills will evolve, and the content will only get better. So, don't just watch - join me on this voyage, witness the transformation, and be part of the journey as we elevate the content together!
Here's links to some of the items I use. As an Amazon Associate I earn from qualifying purchases.
Fuel Squirt Bottle - amzn.to/43Umzu0
Purple Power - amzn.to/3YoxryW
Chain Hoist - amzn.to/3OWF50J
PWC Cart - amzn.to/45j2UVz
Wera Screwdriver Set - amzn.to/441tTEf
Craftsman Hand Impact Screwdriver - amzn.to/45lpLjd
Microfiber Shop Towels - amzn.to/3Qw3Phl
Ultrasonic Parts Washer - amzn.to/43XrrP6
Hand Siphon - amzn.to/3QpIHcBDJI Pocket 2 - amzn.to/44YEocK
Powered handle - amzn.to/3DK6Kvp

[@denniscox7233]

Thanks for all your skills 🇨🇦🇨🇦

[@Nine_Finger_Wrenching]

Thanks for watching, and taking the time to comment!! 😎🙌

[@aydenmendoza7524]

Once again leaving my comment to support and to thank you for taking the time to record and upload I appreciate it

[@timnell207]

Definitely inspect the fuel selector before deciding to replace it or not. Nice work Josh, I’ve been looking forward to this video.

[@Nine_Finger_Wrenching]

On other ones I've taken apart, cleaned, lubed o-ring and rolled. Folks say it's a big source of problems, to just replace. How much money does one throw is the question?!? $$$

[@Amicaner]

Super details, great video!

[@jacobleith1957]

Nice man, this helped me a lot!

[@Nine_Finger_Wrenching]

Thank you so much for watching and taking the time to comment. I'm so glad to hear that this helped you.

[@traviswerts247]

shop looks awesome dude, keep it up!!

[@Nine_Finger_Wrenching]

Thanks Travis!! Good to hear from you. Hope all is well!!

[@JOHNT65202]

Really like the background music during the 1st 5 minutes. I wonder what that song was? Great informative video.

[@JOHNT65202]

Do you happen to remember the song title?

[@Nine_Finger_Wrenching]

This is my intro song @@JOHNT65202 RocknStock - Drive Ahead Then when I was pressure washing it was. SOURWAH - Its Going Down I need to start putting music credits in my descriptions. I'm still learning stuff LOL

[@user-cw8rw8ug3k]

Great video 😊

[@Nine_Finger_Wrenching]

Thanks! I appreciate you watching and taking the time to comment. Means a lot.

[@thomaspaccione7214]

Those are not Phillips screws. They are something JIS, Japan Industry Standard. The JIS tip is just a little bit different. it fits in the screw head better. If you look at all of those screws, you will notice a punch mark on the head of the screw, this indicates JIS. I have to admit they are much better than Phillips.

[@timnell207]

13:35……Derek would say, “ Help me understand it.”

[@parkers7009]

Hey man love the vids! I just got a 95 sea doo xp that’s running really rich. The guy i got it from said someone switched to pre mix when it wasn’t needed so they switched it back and now it smokes a lot still from that mix. Do you think it will clear out when I put fresh gas and oil in?

[@Nine_Finger_Wrenching]

So someone put premix into an oil injected ski? You don’t mean they took the injection off/block off plate? On a new fresh motor build sometimes I’ll run a tank of premix through first. Yeah it’s bad smoky. It will clear up though once you go back to regular fuel. You may need new plugs after. Or at the very least give em a little cleaning.

[@Nine_Finger_Wrenching]

Oh and thanks for watching!!! 😎🙌

[@parkers7009]

Thanks a lot!😎 I just got back from a ride and it won’t stay running in the water. I’ll have to look into it. Maybe it’s just the idle screw

[@Nine_Finger_Wrenching]

@@parkers7009 in water you should be about 1500, out of water 3000 rpms

[@krowbar1969]

What did you use to degrease the inside??? Mine is really ugly… I have a pressure washer… but don’t know what to use for degreasing

[@Nine_Finger_Wrenching]

I use Purple Power. I spray it down and let it sit for 10 mins or so then start washing with pressure washer. I tip the front up so it drains. Sometimes ill put one side up on a block because drain plug is only on one side. You'll see me washing this one out about 1:30 mins into this video: kzbin.info/www/bejne/Y33EkHmcf7SpZ5o

[@krowbar1969]

Thanks for getting back to me… some people put links for people like me to look at what you guys are using …

[@Nine_Finger_Wrenching]

@@krowbar1969 I’ve got links on most all my videos. Plus on my Nine Finger Wrenching website there’s a tap “stuff I use” it shows all the stuff I use in my videos. Link to website is on the about section of KZbin.

[@michellesuzannesebestasebe4701]

Where are you located

[@Nine_Finger_Wrenching]

I’m in the USA.

[@mohsensharafi9443]

Nice

[@Nine_Finger_Wrenching]

Thanks for watching, and taking the time to comment. I appreciate it.

[@mohsensharafi9443]

@@Nine_Finger_Wrenching hi my good friend i just bought a 1995 gtx jet ski and i want to do some repairs thank you for this video it helped me a lot have a nice day

[@Nine_Finger_Wrenching]

@@mohsensharafi9443 fun ski to work on. I’ve redone a couple of the 1995 GTX. If you have any questions feel free to ask. I’ll help if I can.

[@mohsensharafi9443]

@@Nine_Finger_Wrenching Thank you very much for your time have good day

[@hopesteadplanting8468]

🎉🎉🎉!

[@Nine_Finger_Wrenching]

I feel the same way. Up until 1:30 last night, editing and downloading. 😴💤🥱

[@timnell207]

You forgot…Bring the thunder!

[@Nine_Finger_Wrenching]

I love when he does that.

[@stephengoddard3887]

Always replace selector

[@Nine_Finger_Wrenching]

Sound advice!

[@angieyoung9507]

Could you help me

[@Nine_Finger_Wrenching]

I certainly would be glad to try.