#89018678 AC delco air inlet valve actuator. If you need help with dash removal watch Level7 Construction's video. • HVAC Box Removal Air-f...
Пікірлер: 48
@steveklein27223 ай бұрын
Once, SK Tools had a flexi whip 1/4 drive extension. Would have made that hard bolt a few seconds of work. Also, you want 1/4 drive flex sockets for tight access. Always want 2 or 3 options on the PITA tasks under the dash.
@TrippyWoodStock2 ай бұрын
This sounds like a wonderful job to do on my humid 90+ degree non-electric heated concrete. 🤣 the ticking sound the acutator makes is driving me literally crazy.
@Love4raineАй бұрын
TY Tyler. This is what my daughter’s “ mud digger “ 98’ GMC K2500 Anthem off road equalizer 42” Super Swampers 12” lift I bought her is doing. The hard part for me is going to be climbing in and out to fix it 😝 not removing the dashboard 😂😂. PS I’m living my teen years thru her 😂😂 I miss them days. But she’s a Mississippi Delta girl keeping it COUNTRY !! But seriously for you southern dads out there it’s a GREAT WAY to bond with your daughters and keep the boys wishing 😉
@Pendragon6960811 ай бұрын
Lol we have the same stereo 😂 I need to redo the hvac on mine cuz mine blows soft af even after I took the blower out and cleaned the core and still blew about the same so time to mess around and find out lol
@jameslowe66 Жыл бұрын
Tyler ty for this I bought my truck new in 95 started having this prob yrs ago
@ScoobyDigites2 жыл бұрын
Exactly what's going on with mine. I pulled over when it started because I though something serious had gone wrong.
@kyergilreath21303 жыл бұрын
If you just need to get to the actuator on the left and right, you don’t need to take off the whole dash. There’s 3 in all.
Which actuator is heat/ cold left. Right or top actuator?
@harlandranney35803 ай бұрын
thanks for your video! will share with patient mechanic.
@appalachianoperator3 жыл бұрын
Thank you my truck has been doing that thumpinv for a year and i can finally remove this fucking thing
@chicagovasko Жыл бұрын
Good job brother.
@asteriosanagnostou3243 Жыл бұрын
Love it!
@jdmxLove2 жыл бұрын
Thanks for the video
@davidunger93342 жыл бұрын
Reset the actuator gearing to factory. Manually with low voltage signals to appropriate pins. Instructions are online. Never power up vehicle while actuators are not fully installed. Gears goin freestyle not good.
@esanzi41 Жыл бұрын
thank you
@geoff0brn4 жыл бұрын
Thanks for the video! I'm going to attempt the same job....my mode door fell off its hinges as well. Do you know why it happened? I can just put it back in place I gather from the video....thanks!
@tylerpankratz53654 жыл бұрын
Sorry man I didn't find out why mine fell off.
@geoff0brn4 жыл бұрын
@@tylerpankratz5365 thanks yeah I fixed mine and Jimmy rigged a tab to hold it in place from the outside so it doesnt pop out again. I'm still getting air from the defrost when its off. It looks like the linkage doesn't close the defrost door all the way. I can manually shut it and get good air through the forward vents. Idk I'll let you know if I find a fix.
@tylerpankratz53654 жыл бұрын
@@geoff0brn so you'll still get some air out like I did but it shouldn't blow to hard. Some older trucks like mine have bad seals. You'll notice my flaps had the rubber seals missing in some places. If you want it air tight I'd recommend a good sealant like weatherproofing that's not to thick or obstructing the flaps from operating properly.
@samuelmcgill-rl3lb Жыл бұрын
Rough roads make them fall off.
@davegibson3763 Жыл бұрын
my face vent doesn't blow, I changed the blend actuators on the driver side, the one in the middle, but haven't got the one by the blower, I also haven't taken the dash off,im wondering if it is the door to the face that is stuck or broken somehow.
@coreyc5992 жыл бұрын
How did u put the linkage back on the top flap mine came off and I can't get it back on I don't really wont to remove the dash for just that
@robertsweet41123 жыл бұрын
How come your dash is set up on wrong side?
@chevy9771 Жыл бұрын
I didn't know they made these trucks with the steering wheel on the opposite side 😮
@jacobcallahan4780 Жыл бұрын
It’s probably his camera making everything flipped
@davidburnett43153 жыл бұрын
Do you think there is anyway to get to that bolt with the dash on or maybe an easier way to get to it
@tylerpankratz53653 жыл бұрын
Not really no
@kyergilreath21303 жыл бұрын
I was able to, had to go under.
@Jtmcguire12 жыл бұрын
Bro where are you from? I may need your help on this one ha
@andrewwoodall91193 жыл бұрын
I got the 96 k1500 z71 4x4 and I got no air at all from my vents, 🤷 not the fuses already check it ,I got no air at all
@PaullyG19915 ай бұрын
You ever figure it out
@anthonyk4 жыл бұрын
Have same problem but I inspect the blend door and it looks to have either broken or detached itself
@tylerpankratz53654 жыл бұрын
Should be an easy fix if it detached. Don't put it right on make sure the clutch moves it correctly or you'll still have the problem
@benkanobe75004 жыл бұрын
Did the "flap" come loose all on its own or was that a result of removing the dash? Mine will not blow out the front/face vents and so was wondering if it was the door actuator or the "flap"? Can I fix the flap without removing the dash? Thanks, very helpful video.
@tylerpankratz53654 жыл бұрын
The flap came out on their own. If you can use your phone camera or a bore light to see if it fell off. Check all your vents and you should see them if they look in place it could've slipped off the clutch that moves it open/closed. You should see if you get any airflow out the front because you could have more then one door not working. But before your take your dash off check all of your blend door actuators l, you'll have 3 of them. If they are good check your blower motor and fuses. Pay close attention what happens to all of the above when you switch between directional flows.
@juanrobertoruiz13093 жыл бұрын
How did you take the dash down
@carloshernandez-qu8yd2 жыл бұрын
How do U remove the dash
@jeremyrose22384 жыл бұрын
Where are you from that truck is right hand drive, is it an old mail carrier truck?
@tylerpankratz53654 жыл бұрын
Its left hand drive
@muchgreatness74973 жыл бұрын
@@tylerpankratz5365 LOL --- It's always Miller Time somewhere in the world...
@alvendetti46002 жыл бұрын
im not getting defrost..
@Aaronferguson312 жыл бұрын
Gear broken in motor
@alvendetti46002 жыл бұрын
1995 tahoe
@nickbelkin91803 жыл бұрын
Fucking rediculous. Pretty much have to dismantle the entir truck to get to a $40 part. Fucking burn the truck to the ground. Imma just unplug it and say fuck it
@theaussie71602 жыл бұрын
i wish i could fix my wifes flaps.......there now drapes