Back Yard Mechanic Work. Got estimates from $550 to $775 JUST for the fuel pump. I did it all for $150. Complete pump, high pressure fuel lines, gas filler hose, low pressure returns, emission lines and all new clamps. Priceless
Пікірлер: 87
@patsmith52364 жыл бұрын
Very nice video. You seem to be the only guy making a video on this, that cared enough to clean the area before removing the pump ( this why I continued watching). Who would believe someone who lets all that crap fall into the tank? I'm bookmarking this for future use as I just tested my system looking for a reason for a bad running truck (wasn't my problem either). Kudos, very informative and thank you.
@danag.95233 жыл бұрын
Very backwoods sounding guy video well explained I would have hooked up to a tree limb also lol I now know how tho change my fuel pump on my 93 d21 4x4 v6
@bengraham32254 жыл бұрын
Hi Ted - thanks for the video. I'm going to be doing the same over the weekend. You made it look like a piece of cake..... Cheers from Australia
@Icanthandlethis853 жыл бұрын
Thank you for this video I just got my uncle's 96 and found out it was the pump and had no idea what to do but this cleared it up and was fast to do
@louzts884 жыл бұрын
I don't know where you live, but you belong in the South. This is some Shade Tree Mechanic work. Talkin' bout pullin that bed off with the tree limb. Good work and great vid!
@tedkoran4 жыл бұрын
Shops wanted $600-$850 to replace pump.
@tedkoran3 жыл бұрын
I've been in Florida since 1970. When you could go to Clearwater Beach and there were only a dozen cars in the parking area. Before the "Yankee Invasion" of the 80's.
@johncelletti31084 жыл бұрын
I do not have a farm jack. I used 2 scissor lift jacks on 2 cinder blocks and some bricks that bring it up to the top of the rear tire. I laid a piece of 1x6 to extend onto the tire. This way the pressure exerted down is even. I did this on both sides and raised it up even. I used blocks between the bottom of bed and frame. This sounds complicated but not too much once you get started
@dco9564 жыл бұрын
glad its running....i used fence post pry bed up... put blocks between bed and FRAME
@hassanshayegannik155 Жыл бұрын
Thank you for your descriptive video with good determination. Bravo!
@jogmas122 жыл бұрын
Thanks, just developed the same problem on my 1986 d21
@robertglidewell94944 жыл бұрын
Must do the same on a '97. Nice pictures of hose locations. Thanks for video and good job. But unless I missed something, seems like a good way to get decapitated. Would use a couple 2x4 or 4x4 to prop up bed for safety in case jack got bumped
@CherwannRene-ll7ft2 күн бұрын
Thanks 👊👊🇺🇸🇺🇸
@TheTuneAce10 ай бұрын
Thank you for this because I'm going to need to do it soon
@jrock-xs9vp7 ай бұрын
Great video so there's two Jack's one on each side.
@tedkoran5 ай бұрын
I just used the one jack on the gas tank side. I did remove bed bolts on both sides.
@generalporkchop18173 ай бұрын
NICE
@larryl86766 ай бұрын
Mr. Koran, thank you for showing the video. What are the sizes of 2 gas & return hoses at the fuel pump?
@tedkoran5 ай бұрын
I'm sorry but I don't remember the hose sizes. I measured the inside diameter of the pump hoses and filler tube.
@dannys8133 жыл бұрын
Your video was very interesting...you made it interesting.
@walterhoori3583 жыл бұрын
Thanks Ted
@MarkWYO Жыл бұрын
Thanks so much for taking the time to make the video. Where did you buy the fuel pump?
@tedkoran Жыл бұрын
Rock Auto
@platinumempire57094 жыл бұрын
Pump Quick LOL Great Video!
@bigwhite7three9632 жыл бұрын
Good video, do you happen to have a part number for that pump
@johncelletti31084 жыл бұрын
great video thank you
@guilleloyensy6 ай бұрын
Question my amigo see if you answer i got the same nissan my issue if i got to the filter under de carburetor unglug the filter the gas is coming at top hose and i guees is supposed to come fron the botton of the filter ???
@tedkoran6 ай бұрын
There should be an arrow on the fuel filter. The arrow points to the carburetor. I hope I understood your question properly.
@sirkraken5140 Жыл бұрын
I know this was years ago but I bought a tube that diameter recently likens 3rd of the size and it was like $15 bucks
@johncelletti31084 жыл бұрын
maybe replace the fuel filter as well it cant hurt
@tedkoran4 жыл бұрын
I did.
@glendapearce4141 Жыл бұрын
Yep unbolt one side jack it other side fucked right then only one way to change fuel pump right and that right drop tank
@vusiloyd1771 Жыл бұрын
How many bar are the hoses
@maryfrancis4515 Жыл бұрын
I have the same truck 1996 Nissan pickup 2.4L 4 cylinder. I’m having a hard time finding the whole assembly for the fuel pump and was wondering where did you purchase yours and if you have the part number. Thank
@tedkoran Жыл бұрын
Got mine at RockAuto.com. You might also want to consider just replacing just the pump itself. Here's a good video for doing that: kzbin.info/www/bejne/bKbNe3qPd5Z-idU. He removes the tank so my method to get at the pump assembly is easier.
@maryfrancis4515 Жыл бұрын
Thank you I did order it from rock auto. I liked your video.
@captaindeadpool16403 жыл бұрын
My truck set for 2 years and I am trying to get it running again I think my pump is bad I took the hose off the top of the fuel filter the one that goes to the fuel rail and try to start and no gas comes out. Can you hear the fuel pump come on? I have a 92 2.4L
@tedkoran3 жыл бұрын
Your fuel pump is in the gas tank. Yes you can barely hear it.
@Struttinhoyt882 жыл бұрын
So did this fix your power loss issue? I’m having the same problem with my 96 and I’m kinda leaning towards it being a fuel pump issue.
@tedkoran2 жыл бұрын
Yes, it solved the problem. However just the pump itself and the filter could be replaced instead of the entire assembly.
@treerobo68643 жыл бұрын
hey ted what kind of pump was that
@DonovanGatlinsr2 ай бұрын
Will a bad fuel pump cause it to back fire some?
@tedkoran2 ай бұрын
My "guess" would be something in the timing.
@DonovanGatlinsr2 ай бұрын
10/4
@finaljudgment893 жыл бұрын
I'm wondering if my fuel pump needs replacing. Did it help wit ur mpg? And wow ur engine got some power
@tedkoran3 жыл бұрын
It didn't add to the horsepower but sure got it back due to lack of fuel. Gets up and goes pretty quick. And I've pulled 5000 pounds surprisingly well. Trailer has brakes.
@tedkoran3 жыл бұрын
Easy to check fuel pressure. Most car parts will loan the guage. My engine would lose power once in a while. Fuel pressure would drop below minimum pressure.
@finaljudgment893 жыл бұрын
@@tedkoran mine just seems to not prime correctly and sometimes takes a bit to start the truck. Also mpg isn't that good. My lines may be rotted as well. Smells of gas around the tank wit fumes
@AbarthVirgo4 жыл бұрын
Is the sending unit discontinued or something??? I checked rock auto oreillys, and Napa with no luck!!
@tedkoran4 жыл бұрын
You can get just the pump. Easy to replace in your existing unit.
@tulipboysillygoose3 жыл бұрын
Hey where did you buy the new assembly? Trying to find one.
@tedkoran3 жыл бұрын
Got mine at Rock Auto.
@officialsouthsoul52234 жыл бұрын
She sounds mean man, is it the 4cl or v6?
@johnholland34762 жыл бұрын
How did you get the front 2 bolts out after taking off bracket my bolt just spins
@tedkoran2 жыл бұрын
Mine didn't spin. I'll take a look at mine to see if I can come up with a suggestion.
@tedkoran2 жыл бұрын
John, Above the bolts on top of the bed hold down bracket there are the bolt heads. Took a picture but can't post it here. I didn't check to see what size head. You will need a socket and feel by hand.
@lofadem2 жыл бұрын
How you lifted up the other side
@tedkoran2 жыл бұрын
I only lifted the passenger side.
@lofadem2 жыл бұрын
Oh it looks on your video that it lifted up straight up , I try doing it and only one side was going up the other side was tilting even with all 4 bolts unscrew it was putting too much pressure on them so I stop , I’ll get my fuel pump today so I’ll try again thanks.
@wolfmazter4 жыл бұрын
What size hose did you use for the filler neck?
@tedkoran4 жыл бұрын
I pretty sure it was 2" if I remember correctly.
@diegov99894 жыл бұрын
Where did you purchase the hoses?
@tedkoran3 жыл бұрын
Sorry for the delay. I got the new lines at the local auto parts store.
@stacybaker26945 жыл бұрын
Where did you get the sending unit? I cant find one at all.
@tedkoran5 жыл бұрын
I bought the whole setup at RockAuto.com. They don't have any at the moment. You can buy just the pump and put it in your existing unit.
@austinpetemo4 жыл бұрын
I think the sending unit is discontinued. I cant find them either.
@jeffykings33414 жыл бұрын
hi, how can I get the while unit? I need it in Belize. thanks
@tedkoran4 жыл бұрын
You can buy just the pump part of the unit. Be sure to get one that has the plug that fits like original. kzbin.info/www/bejne/bKbNe3qPd5Z-idU
@jbpoly15 жыл бұрын
What year is your truck? I ordered a different looking fuel pump. Hopefully I bought the right one
@tedkoran5 жыл бұрын
It's a '96. You can get just the pump part and not the entire unit. Just make sure you get the replacement wit th proper plug. The cheaper ones don't have a connector plug so you'll need to splice and use heat shrink protector. What year do you have?
@jbpoly15 жыл бұрын
@@tedkoran I have a 1991. And the pump I have that came in the mail today has a circle piece maybe a filter or something attached to one side
@tedkoran5 жыл бұрын
Is this what yours looks like? I get my parts from Rock Auto quite often. www.rockauto.com/info/22/SP4017M_FRO_P01__ra_p.jpg
@tedkoran5 жыл бұрын
Here's the page for your year on RockAuto.com: www.rockauto.com/en/catalog/nissan,1991,d21+pickup,2.4l+l4,1210981,fuel+&+air,fuel+pump,6256
@@tedkoran i got a 97 automatic...your truck seemed fast when you accelerated.
@tedkoran2 жыл бұрын
@@MrSilvernblackblood It's pretty peppy
@tedkoran2 жыл бұрын
How many miles on your truck? These trucks are notorious for timing chains.
@freezac4 жыл бұрын
Hey are you interested in selling your old fuel sender unit?
@tedkoran4 жыл бұрын
I have the new one. It didn't have the heat sensor on it. I put a new pump in the old one. Turns out the pump wasn't the problem. Had a pinhole in the line by the filter and was causing a vacuum causing loss of power. I'm located in Fl.
@tedkoran4 жыл бұрын
What year is yours?
@belmarbrandon2 жыл бұрын
Ted I'm only getting 10mpg. You mentioned replacement of pump wasn't necessary, as you had a pin hole in fuel line by filter. You mean the filter in engine compartment? How did you find and fix the problem? Thanks for the time you took to make this video!!!
@johnholland34762 жыл бұрын
Heck they dont want anyone getting to the 2 front bolts on my 97 ,,i cant
@tedkoran2 жыл бұрын
Are they hidden? All four of mine are in plain sight.