1996 OBS LS6 SWAP

[@snty2345]

Nice Truck!! Sounds Bad Ass!!

[@rynophiliac]

beautiful! What challenges did you have with the swap? I'm considering swapping a ls1 or ls6 into my 62 c10 at the moment

[@jeremymcclanahan2389]

Take my 💰 love it

[@chrismiller5108]

Sounds awesome.

[@brentrademaker]

Thanks!

[@615theBuzzard]

Love the truck! Clean af!

[@brentrademaker]

Thanks. Its at paint and body right now.

[@da602hustler]

Sick ass truck!!! My Arizona Ls buddy!

[@brentrademaker]

Thanks!

[@3veyevevgeyevhdhdvebeheh599]

I love your truck that's exactly how I want mineee

[@franw51]

So rad. Never get rid of it.

[@zachburke1]

Now that's a "Street Truck" !!!!!

[@dylanfranke5530]

Super nice ride!!! I love the exhaust! Looks factory under the hood too! Nice job man!

[@superc4308]

Nice cam chop 🔥🔥🔥🔥

[@brentrademaker]

Thanks

[@javig8895]

A lot of money tied up in that project super clean

[@juanmendez2060]

Bro was this hard to do ? Thinking about doing this to my 96 Chevy

[@brentrademaker]

Wasn't too hard, just have quite a bit of time in it.

[@denimdios]

Beautiful truck!

[@ph6ntm]

doing this to my 05 soon

[@GueroObs]

What cold air intake did u use??

[@brentrademaker]

It's a kit you can put together your self, from www.siliconeintakes.com/

[@GueroObs]

Can u tell me what parts did u usee plss it would be a big help

[@GueroObs]

And what throttle body did u use

[@brentrademaker]

On this setup, I was running the LS6 throttle body. Now, with the truck supercharged, I'm running an LS3 throttle body.

[@newmantv5668]

Nice truck snd it has a good stance and nice sound.

[@brentrademaker]

Thanks! it's been a fun project.

[@maxwellmarsden7273]

DAMN, i keep telling myself JUST go 355 with my 94s 350 then had to watch THIS??? ~ROFL~ (keep teasing myself there's a wrecked 6.2 out there just WAITING)

[@RenegadeADV]

Yeah, that sounds fast enough to do something stupid with! 😈😈😈

[@fabiog2736]

What lowering kit are you running and what brand? Looks awesome

[@brentrademaker]

Ride Tech 4/6 kit. Thanks

[@biggdogfresh2263]

@@brentrademaker you think i can do a 3,5 and run 22x9 and what tire

[@EricPettus910]

Damn man, well done!

[@compasdearranqueoffroad2620]

Nice but nothing is better that 1970 454s engines

[@georgiaboy1579]

N I C E ! Outstanding work Sir

[@brentrademaker]

Thanks!

[@merkabola]

Perfect street truck

[@mikeodell5915]

Sick

[@michaelluisortiz1703]

I’m working on getting a swap real soon on my obs 96

[@KidKevi]

I see you have a 228 cam , so do I Haha , best cam to put in an Ls period ! Love the truck man , TBsS intake would wake that thing up down low , but love the corvette look

[@brentrademaker]

Thanks man. I hoping to replace that LS6 intake real soon.

[@gerardodominguez575]

Did you get a new rear end for the disc breaks or did you do the conversion from drums to disc break ?

[@brentrademaker]

I did the conversion from AZ Pro.

[@anthonyscott385]

@@brentrademaker , Did you have to consider brake caliper offset before the purchased of the Attack wheels ideal offset for that rear disc kit? I'm well aware what basic offsets works on these lowered, have a '90 C1500 Sierra Sle rcsb aka obs. I'm currently looking to purchase the Attacks in 18s & surprised in the 5x5(5x127) bolt pattern on 18x10, 5.5" backspace is maxed offering. And 6" backspace would be ideal for 295/45/18 for example. Go up to the 20s ideal increases. Appreciate any info, you have a very clean one. I'm inspired...

[@Blitz0065]

Beautiful!!! What's your full set up?

[@brentrademaker]

Thanks, after my dyno/tune I'm going to make another video with all my Build info. The truck was completely stock when I got it.

[@mauriciogomez1231]

How did you do the mufflers straight to the back? Did you move the gas tank ? Because I have a 1997 2 door Tahoe 2wd and I want to do corvette style mufflers but the gas tank is on the way.

[@brentrademaker]

I have 3 inch long tube headers, at the tail shaft the driver side loops over to the passenger side. Both 3 inch pipes go into an x pipe and straight into two Carven mufflers. The pipes then go over the axle and come straight out the middle of the truck. My gas tank is on the driver side. I think Tahoe tank are in the rear of the vehicle.

[@mauriciogomez1231]

@@brentrademaker yeah sorry lol I just noticed that all Tahoe’s have it in the rear sadly. Thanks though !

[@3veyevevgeyevhdhdvebeheh599]

CLEANNNNNNN

[@maxwolthuis]

Did you mate it with a t56? What is your ring and pinion ratio? VERY nice build 👌

[@brentrademaker]

Thanks Man, it's a 4L70 with 3.73 gears

[@dannyboiboi5119]

What wheel set up you running bro ?

[@donaldbitsinnie8088]

Clean 👌

[@stepsiidedanny5077]

How much was it for everything

[@CoolCarsKJ]

Dope!!!!! Great truck. Just finished my 5.3 swap in my 95. Check it out.

[@brentrademaker]

Thanks man! you scored big on that red OBS. I would love to find that deal.

[@RevRumble_]

Sweeeeeet

[@artcryze9118]

how much hp?

[@brentrademaker]

Right now, it's 564HP

[@artysmotorsports]

#goals for my obs 👍

[@derrymunz7864]

Badazz Chevy.

[@ramirezj115]

What exhaust r u running?

[@brentrademaker]

Schoenfeld Long tubed, 3 inch pipes into an x pipe and two Carven mufflers.

[@wsEchoPark213]

Beautiful

[@bbruno1266]

What cam are you running?

[@brentrademaker]

228/228 112 LSA

[@shadowfire9319]

What wheels are those 🔥

[@brentrademaker]

Rocket Racing, Attack wheels

[@jonathanlimon4967]

Did you up upgrade your original fuel lines and fuel pump ?

[@brentrademaker]

Yes, I ran all new AN line and a 255 Walbro pump.

[@jonathanlimon4967]

@@brentrademaker I appreciate the info as I am in the process of putting a 6.0 into my 93.

[@kevinm8869]

Thats a fuckin truck!!!

[@AMXZ28]

mine purrs just the same

[@tylerloyd614]

Is that carbureted

[@brentrademaker]

no

[@davidfink9729]

Damn nice

[@discomovilvip]

price for the swap in labor?

[@juancaballero284]

What brake setup is that?

[@brentrademaker]

It's the Baer brake kit from AZ Pro.

[@josephaltamirano4774]

What engine is that thx in advance

[@brentrademaker]

LS6 with a built top end.

[@radialblock0285]

Where did you get the harness work done

[@brentrademaker]

Current Performance in Florida. Great guys there!

[@rodolfoyanez2253]

Igualita ala q Yo tengo

[@finitovlogz7810]

wooow

[@aaronyoung7242]

Nice!!!!! Anybody know how to turn a long bed into a short bed?

[@xxkiller59xx]

What wheels are those

[@brentrademaker]

Rocket Racing Attack wheels.

[@matt86toy]

What is the wheel and tire set up?

[@brentrademaker]

Rocket Racing Attack Wheels. 20x10 rear and 20x8.5 front. Tires are 245/40/20 front and 285/35/20 rear in the video. Now I have 305/30/20 on the rear.

[@matt86toy]

Thanks

[@stevencobraR]

Would you happen to know the offset and back spacing information by any chance? Or possibly the part number to the wheels. Thank alot. Truck looks sick!

[@nickarmystrong]

How much would you say total job cost

[@brentrademaker]

I would say including the cost of the truck, brakes, wheels, suspension, engine and trans....$15K maybe a bit more.

[@andyrivers9423]

dude wtf this is too much

[@jjventuraaa9069]

What’s your ig bro

[@brentrademaker]

My ig?

[@jjventuraaa9069]

BRENT THE LAW Instagram

[@thesquirrel914]

Over or under axle for the drop kit?

[@brentrademaker]

under the axle.

[@josuesolis9853]

What cold air intake are you running ?

[@jaimecortez3601]

What cold air intake do you have?

[@brentrademaker]

It's a 4 inch Edlebach filter with Silicone pipe fittings from silicone intakes.com