1998 Chrysler Town & Country: Remove Intake Manifold

This video shows you how to remove the intake manifold from a 1998 Chrysler Town & Country. See description below for more info.
Job Playlist:
1) Open Car Hood: • 1998 Chrysler Town & C...
2) Remove Intake: • 1998 Chrysler Town & C...
Materials/Tools:
- breaker bar
- ratchet
- 10 mm socket
- 13 mm socket
- 15 mm socket
- flat head screwdriver
- pliers
For all of our videos related to this vehicle see following playlist:
• DiY Ken: Automotive: 1...
Disclaimer:
The information contained on Grains of Sand: DiY Ken is for general information purposes only. Grains of Sand: DiY Ken assumes no responsibility for errors or omissions in the contents on the videos.In no event shall Grains of Sand: Ken DiY be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the videos or the contents of the videos.
Grains of Sand: DiY Ken reserves the right to make additions, deletions, or modification to the contents on the videos at any time without prior notice.
External Links Disclaimer:
Grains of Sand: DiY Ken may contain links to external websites that are not provided or maintained by or in any way affiliated with Grains of Sand: DiY Ken
Please note that Grains of Sand: DiY Ken does not guarantee the accuracy, relevance, timeliness, or completeness of any information on these external websites.

[@jerryschauss4123]

Helpful video, had already started my 1999 Caravan project. I need to replace the rear heater hose assembly behind the engine. Will also replace spark plugs, wires, valve cover gaskets during my project.

[@MrBankotsu18]

I know this vids old and idk if u still have ur van but thank u so much. I have a 97 town&ctry and can never find videos to learn from.

[@sandovalmanny34]

Just the video I needed for this weekend’s project. Thank you for the detailed video

[@Oscarphone]

I'm going to add here: If you take off the wiper/heater intake plenum that houses the wiper and wiper motor, only takes a about 10 minutes to remove, it makes your life much, much easier on this job. That last part where he shows you the back support bracket off, can stay if you remove the wiper/heater intake plenum.

[@KZ3W]

Thanks for the video / info . Yea ,,, workin' on a ( still got ) 1999 model . Tranny was rebuilt a few years ago ,, and still runs great ,, body ok ,,,,, so gonna try'n tune some stuff up . 👍 ,,,, ✌️..

[@frankdenardo8684]

I took out the entire wiper housing to get at the back spark plugs. Had to buy a set of stubby wrenches and a palm driver to remove and install the new rear spark plugs.

[@uradragon7823]

I've got a 1995 T&C and thought I'd put in new spark plugs and wires. The front bank was easy but the rear bank has me wondering the best approach. The book says from the bottom but there ain't room to move. Thanks for the post.

[@jimskipper2588]

Verify helpful! I have wondered how hard that would be, and you made it look easy. Very clear explanation.

[@martinjackson558]

i know im asking randomly but does anybody know of a way to log back into an Instagram account? I somehow lost my login password. I would love any assistance you can offer me

[@gaelangelo1828]

@Martin Jackson Instablaster :)

[@martinjackson558]

@Gael Angelo thanks for your reply. I found the site through google and Im in the hacking process now. Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.

[@martinjackson558]

@Gael Angelo it worked and I finally got access to my account again. Im so happy! Thanks so much you saved my account :D

[@gaelangelo1828]

@Martin Jackson glad I could help xD

[@playadelcarmen9510]

Muy bien resumido a lo esencial. Sin palabrerías ni basura. Parece ser la mejor opción para lograr acceso a las bujías posteriores. Faltaría definir el asunto de la junta del múltiple de admisión (intake manifold gasket)

[@MattJonesYT]

Probably a good idea to put it on cardboard or something so that the surface doesn't get chipped rather than putting it on the ground

[@Josefht]

Once that intake plenum comes out it will leak air and oil forever no matter how you tork it, and will cause a rough idle as well. It takes hours just to remove the heat risers and grounding straps on the plenum, it is so not worth it. it will be true thank you so much

[@tonybucca5667]

Only thing you forgot was to disconnect the ground clamp on the battery

[@zephxiii]

NIce, showed some good stuff of the process there.

[@stephenm3874]

Awsome thanks! Helped me a lot

[@Emiabiarlanari]

You should have taken the wipers assembly way easier process then how you struggled.

[@mattmgarza]

I agree. The wiper assembly takes maybe 5 to 10 minutes to remove. Just mark an outline of the wiper blades in crayon so you can position them correctly when reinstalling.

[@brianashley2880]

This video is missing things, like remove the Ir box, remove belt and u bolt top alternator bolt, disconnect EGR tube. If your going to make a video on how to do the job, don't start halfway threw disassembling.

[@johnmilner6484]

That's a coil pack,NOT A DISTRIBUTOR

[@atlan1561]

Thank you 🙏👍

[@alexrubio9804]

do u know how to clean the heads on the planum because inside the block its black for me

[@tombaja4.9]

Is there a gasket on that manifold?

[@techrvl9406]

Man, you really trashed that fuel rail. Those mopar 3.3 suck anyway. I'm almost sure you're gonna be leaking gas onto your engine.