1999-2004 Jeep Grand Cherokee Turn Signal / Hazard light Relay replacement.

[@huskieblue3519]

My hazard lights worked but my turn signal lights stopped working on my jeep. I followed your video and replaced the relay. Now all the lights are working as they should. Thanks for putting out this easy to follow instructions video.

[@charleshelton8905]

I did not know about the relays back there thank you now I can fix mine.

[@JeffWhitaker-777]

Thanks man, relay was 65$!!! So I bought a 14$ solder gun at Walmart and fixed it! You're the best

[@mrh0ck3y]

@myprayerforyou777 wait how?

[@michelle.p1186]

Great video thanks so much it fixed my Jeep no blinkers and no hazards. This 55 year old lady fixed before hubby got off work

[@lusitaniafilms]

Thank you for your help :)I knew that is what is was but didn't know where it was located. or how to remove it. with your help I did. Thank you buddy.

[@smokepurple007]

This is how all fix vids should be clean and simple. Great video man. Thanks!!!!

[@anthonygreen5231]

Thanks so much for sharing this. I performed this operation yesterday and it did the trick. In my case, only my left turn signal would work sporadically and then would get stuck in the on position. The new relay cleared that up... Thanks again!

[@kryswest6750]

This really helped me and I am only 16 years old I hope you get somewhere in life this really really helped me and I appreciate it man keep up the good work gave you a like on the vid and I subscribed to your KZbin channel once again thanks man for everything

[@FastestIntegra]

I have over 250 videos and every single thing I need to do to my Jeep I try to video and record in detail so more to come I have a bunch I need to add it maybe about 20 new videos lol.

[@abilene45]

Great video! We used it to install a new turn signal relay that we got from Amazon on a 2001 Jeep GC in less than 1/2 hour. Turn signals work. Thank you.

[@gordonperlmutter2380]

Best video for this repair. Visual and audio excellent. Through detailed instructions from beginning to end

[@zephlaron1750]

Every parts store i called couldn't find the part i needed. Thank you for including the part number on the video, the guys at auto zone couldn't find it until I showed them the paused shot of the actual part number.

[@FastestIntegra]

Wow.. good to hear you were able to order what you need after you install it post another comment and let everybody know that it worked for you.

[@dougbennett9558]

You just saved me money and time doing this myself! Great video

[@JamieSmith-lg2hb]

Took me about 30 minutes, after putting it back together I had one indicator/turn light lit up permanently. Took it apart again and found that the relay wasn’t seated properly. Make sure you push it right in. Great video. Thanks

[@michaelawontroba7785]

Dude awesome vid, my stepdad and i are working on this tonight, you deserve waaay more views thank you so much!

[@FastestIntegra]

I have a ton more WJ how to vids coming.

[@MrSkyhawk11]

I did change the relay, and it worked my turning signals. Thanks a lot

[@garymatherly7047]

Thank you! That was the problem. Its fixed! And taking the lower fuse block a little loose for the small amount of wiggle room was the key.

[@harveystovall8006]

Perfect solution to an apparently common problem. Even an idiot like me was able to DIY thanks to this video. Saved my 99 Jeep GC.

[@henrylucas8924]

Thank it was very helpful however, all I had to do was tighten the relay a bump knocked it loose and because of your video I fixed it just by reaching with my hand without taking it apart

[@donjohnson1416]

I like your format the fade away and then on to the next step!! Very good video sir

[@codyaames]

10/10 helped me replace my relay, thank you for posting.

[@TucsonLuni520]

nice, simple, straight foreward video! thank you!

[@lilonespaz]

Thanks for the great video. Just changed it while at work and everything is working as it should again!

[@xxrorounikenshin]

Hey thanks for the help fixed my car and wouldn’t of been able to do it without you.

[@monty3C]

Worked just like the instructions. Did remove the lower two relays to get the module in, it made it slightly easier.

[@mpgalve]

This video rocks. Took me 30 minutes to replace the relay. Thanks brother🇺🇸🇺🇸

[@Random_Fanatic]

Thanks, man! You really helped me out. My blinkers work now. But my hazards still don't. But hey at least something is working.

[@corneliusgerald456]

Thank you for very simple and easy instructions.

[@CharlesKetchum-g9m]

After watching this video I was able replace the flasher and turn signal relay !

[@AmosPerry]

Thanks alot, I had previously changed out my heater core which required me to remove the entire dash, and then my turn signals went out. was nice to see I only had to remove the driver side this time. Its awesome when people like you upload a quick video on how to fix something and show you everything you need to do. greatly appreciate this video. Thanks again

[@FastestIntegra]

I recently noticed a small looking leak near my heater core so that will probably be a up coming video in the next 6 months or so..

[@poleline111]

Thanks so much - Great video - I think I would have had a hard time finding the part if it weren't for your making this vid. Bless you.

[@ypahihi]

Awesome vid. Direct and to the point. Thank you

[@scottcarver3994]

Thanks for your video man you save me a lot of money stupid mechanic shop was going to charge a lot of money for something that they said it was which was totally different put the relay definitely fix my problem thanks once again

[@mydailybread777]

Wished I'd seen this vid a long time ago! Easy fix and I'm super happy! Thanks!

[@randbradbury]

I needed my wife's small hands to get it out but we got it. I just opened up the relay and reheated the solder connections to fix mine. No need to buy a new one. Thanks for the video!

[@nickmcnosky1921]

Thanks for the heads-up. This was what I needed. Problem solved!

[@zephlaron1750]

This is the best video on this issue, replaced mine a couple days ago, worked great 👍 The new relay seems to have slightly faster switch than the last, the blinker is a little more rapid... which is actually an improvement.

[@dennissteele2461]

9-27-23 😊 Your excellent video saved me $500 ❤

[@NorthFloridaLiving]

Great video. You go through the all the steps clearly and then show the package with the part. This was very helpful.

[@solowjumper]

I changed my relay the arrow stays green but doesn’t flash any suggestions, the four ways don’t flash at all Thanks

[@FastestIntegra]

Sounds like there's a faulty wire then if you change the relay and it's still in the same thing there's more than likely a broken wire somewhere in your system bad ground or something

[@solowjumper]

They sold me the wrong relay, I even brought in the old one, once the other proper relay, it works perfectly

[@phillipstothard]

Great! My WJ 2002 just started playing up with intermittent indicators. Will try this out.

[@diekatzefliegt]

Any luck?

[@phillipstothard]

@@diekatzefliegt Yes, thanks, it fixed it straight away!

[@diekatzefliegt]

@@phillipstothard Great! i am having an issue with my jeep- the right blinker will go solid after a few clicks.

[@Amarillobymorning777]

In my case , wasn’t very easy put it back on. I had to pull down the whole fuse panel , then apply little electric grease in each connectors , that’s the only way to push back the new flasher relay on place . Thanks buddy.

[@armandogomez2677]

Could it still be the relay if only one is out? If replaced the bulbs already

[@jeep4low4fun]

What if only one of your turn signala has stopped working?

[@BrianBevington-e8w]

0:00

[@geoffreyweights7697]

Thanks for making this vid. I was having a hell of a time with this

[@JoseVasquez-cs1fs]

If the right side turn works does that means it’s something else? It’s only my left rear turning signal that won’t work but it does in the front

[@FastestIntegra]

If it's only the left rear is probably the housing the left rear is a common light to go out if you look on the forms right now my left rear is out lol. Around the plug and the housing will look a little melted

[@privateer177666]

Thanx for teachin’ an old dog an easier way. 👍🏿

[@jesusvergara4784]

Buen video, me salvaste de pagar a un electricista, solucioné yo mismo, tengo una wj overland, gracias

[@FastestIntegra]

Muchas gracias mi amigo

[@poleline111]

Leaving another comment just to say I found the Novita lm519 flashers a lot cheaper on ebay. Thanks again.

[@jordanleslie1424]

Hey! Love your video and how easy it was to understand. I am wondering what the problem could be if my hazards ARE working and it’s just my signals lights that are out? What could that be?

[@luisreyes8542]

Ever figure that out? Getting the same issue

[@eniojaupaj5615]

I had the same issue (the hazards and the right turn signal work, the left sometimes works) the fault was related to the whole relay holding assembly (where all the relays go). I fixed the contacts and now it is all good

[@pedrosolistorres]

@@eniojaupaj5615 my hazards light work but by turn signals do not and my temperature valve actuator doesn’t work either, keeps burning the fuse as soon as I turn the car on

[@PenRippyJr]

i have the same issue. hazards work but no blinkers and it’s internittent so sometimes the blinker will work. going to mess with the relay junction and see what the deal is

[@pedrosolistorres]

@@PenRippyJr mine turned out to be a cable that ran farm the transmission, forgot what it was called but it was damaged and was getting ground off the chassis

[@dgmaudiovisual8784]

THANK you appreciate it.........and a quetion. I have mu cluster engine indicator partially off with no indication. Any relay or fuse you should mention I could check? Thank you

[@nickpadilla2397]

One question man my turning signals when out but my hazards didnt and i changed the relay but it didnt fix my turning signals any ideas ??

[@johnnysins4158]

Any answers on this?

[@teoroman5574]

Gran video, yo tengo un wj con el mismo problema, no tendrás el enlace de compra del relé? Muchas gracias y un saludo.

[@wimscardano2023]

Hi, thanks. if only the left is not working what is the problem? sometimes it works and then stops on its own? please help.

[@blahblahhhh2801]

Easy I had similar experience… at first I tough it was the Turn Signal Relay. I switched it out anyway and still not happen. I then thought I had some grounding issue. My last resort was to change out the actual turn sign (just the headlight with 2 small + screw holding it) that did the trick!! Let me know I I can help you find parts etc…

[@TerraFirmaX]

This worked perfect, thank you.

[@felicitous48]

Great video. To the point!

[@sageparsely2365]

Thanks. My hazard lights work but not the turn signals. A guy at car quest told me you can usually swap them out bc there's 2 of them in there. But I didn't see 2 like that in your Jeep.

[@sundancer76]

This is the issue with mine. Did you get it figured out? I could turn my hazard on for a minute and they would come back on, but now I think its fried exp the hazards. Lol I grabbed the bigger relay at salvage I can put in I was just curious when I saw this comment.

[@earthtoboom-5888]

@@sundancer76 I just did mine and it started working again

[@capricornone4722]

Bro.Thanks for your help! I just subscribed to your channel.👍

[@michaelborus1350]

Thank you, this helped a lot.

[@songsfromthelord888]

Hey thank a lot for sharing that important information with us 🙂🙂🙂

[@LetsRVtv]

I only had the left turn signal stop working. Replaced the relay and everything worked. Then the left stopped working again and a month later nothing works. Any thoughts?

[@anitajefferson5551]

Thank you. Very helpful

[@dannyl1941]

My hazard work but not the turn signals. Would that still be the relay? thank you...

[@davidwilson5642]

Really easy right I fought with it for a hour had to walk away from it.if you have small hands I could see it being easy they have too have a tool too grab this thing to be able to align it up

[@BlakeBasic]

It's so hard to get the new Relay back in there. I even loosened the bolts on the fuse box and can't get it lined up to click into place. Idk what to do.

[@skiz72]

On my 2001 GC I only have the Left directional not working at all....(The hazards and the right directional still work fine)....Could this still be the Relay or could it be the actual multi function switch/directional??

[@FastestIntegra]

That's the exact same thing mine started doing before it totally went out. It's the relay.

[@skiz72]

@@FastestIntegra"Update".....I reached my hand up in there and just moved that relay around with my fingers and made sure it was plugged in all the way and Abra Ca dabra it was fixed.....Prob a rare case but if i have an issue again i will just buy a new relay cuz that does seem to be where the fault is....Thank you for the informative video.

[@georgelindsay8012]

@@FastestIntegra mine did the same thing. You can re solder the pins if you can’t find the part but it’ll go out regardless. I have a few of the relays laying around in case

[@joshthomas_1696]

My 02 is doing that right now too

[@noemah3272]

Will this fix my problem when I press on the brakes the lights are supposed to become even brighter but they don't all the other lights work tho

[@angleofgod1]

Thank You much appreciated have Bless Day😊

[@farerse]

great video, what if just one blinker direction stops working? is that a stalk problem or still relay?

[@FastestIntegra]

When you say Just One Direction stops working do you mean one whole side as in driver side or passenger side or do you mean just one corner of your vehicle like the driver side front headlight blinker doesn't work?

[@FastestIntegra]

If it's one whole side like driver side or passenger side it's more than likely the relay is bad if it's just one corner then it's probably the light bulb or possibly a wiring issue. Always start by checking your fuses maybe even swap fuses around 2 see if that fuse is good or bad.

[@farerse]

@@FastestIntegra Thanks driver side was intermittenly dead, most likely the relay was not seated all the way in! It probably wiggles itself loose over the years, once I cleaned the terminals with wd40 and re-seated it , now works properly every time.

[@farerse]

I mean the relay is kind of long and sits on the side .. it's bound to lever itself loose

[@farerse]

@@sine730 me? glad to help. the video uploader also had good advice

[@kurtfranz6676]

Thanks for your help, good video.

[@sugarbear166]

Thanks so much, this video is so helpful.

[@maryannleighton]

I have a 2014 Jeep Cherokee Sport V4 Only my right passenger back blinker is stuck on. Would i have to change the relay ? My battery kerps draining. Women in distress

[@gerardjerrygarramone53]

Thankyou so much ill be trying that i have the same problem with my 2002 jeep Grand Cherokee Laraido

[@madisonm6203]

This is so helpful! Thank you!

[@kevinelsberry4585]

Would this be the problem if only the left blinker doesn't work

[@rileyminer4464]

I’m having the same problem

[@MzMuseProductions]

Went to junkyard as could not find part for reasonable price. Guys there were great and suggested to double check that relay was not just loose....sure enough that was all we did was pull it out and snap it back in! They landed up giving me the replacement as a backup....that was a year ago. Since then I have had to take apart dash and redo a few times since then (still using original part)....usually lasts several weeks-months before left signal starts with the intermittent working:not working. My question is can you suggest a way to secure it from jiggling out? Thank you

[@danielmudge5473]

Super helpful, thank you!!

[@cnn94001]

Over 250k miles for this jeep. NICE!!!!!

[@chandlerwahl7781]

Did you disconnect the battery or do you need to when doing this?

[@noearias2006]

❤❤ EXCELLENT VIDEO 🇺🇸THANK YOU

[@genobrn8743]

EXCELLENT video

[@joerichardcycles69]

Good video. Thanx!!

[@RembertoCampos]

Thanks for your help

[@javiersantos201]

Do you have to disconnect car battery before changing this fuse?

[@FastestIntegra]

To prevent any shorts technically yes you should disconnect the negative terminal on the battery however I did not and you probably will be safe as well

[@javiersantos201]

@@FastestIntegra alright I appreciate it, thanks for the fast reply.

[@rebel4144]

Thank you very helpful

[@angelf9800]

Will this work on 1998 grand Cherokee Laredo 4.0

[@yourselfdotcomlol]

Did your brake lights stop working when the flasher went?

[@FastestIntegra]

No your brake lights should be on a different fuse and relay all together

[@yourselfdotcomlol]

@@FastestIntegra thanks. The flasher relay was loose. Blinks now but still chasing no brake lights. Brake pedal switch is good and sends power down white tan tracer but no lights.

[@DavidBurke-h1b]

I have changed that relay in my 99 jeep grand cherokee laredo, and turn signal switch but still have no turn signals or hazard, have changed turn signal switch, nothing, any ideas

[@alonsoguijosa7490]

Hey man my break light the top one when i drive it’ll stay on do you know what it is

[@WJspecial]

Did the signal/hazard lights still turn on but not flash? Or were they not turning on at all? Trying to see if this is what I need to replace on mine. Thanks

[@johnnysins4158]

Have you figured it out? I have the same issue.

[@craigorlikowski2507]

So tonight my blinkers weren't working but the hazards were. Then after sitting for awhile now the blinkers work. Would it still be this real ain't even though the hazards works the whole time?

[@FastestIntegra]

Both the blinkers and Hazard works on the same relay and it's not very expensive so if you're having problems that would be the place to start other than checking your fuse. Mine started failing with no left blinker right side worked hazards work but no left blinker and then progressively got worse.

[@craigorlikowski2507]

@@FastestIntegra thanks for the reply! Just picked this up and yes, apparently I'm experiencing this exact same scenario playing out.

[@old72mac]

Same exact scenario.

[@j4frmst8tefarm]

Hey thanks for your time

[@brandexample1776]

Great video.

[@a-manda9534]

I need help with shift back light and tail lights all went out at the same moment

[@bmb161824]

My hazards and right work on my 04 would I still only replace that one just to get my left to work?

[@FastestIntegra]

Yes both right and left turn signals and the hazard is all the same relay

[@bmb161824]

@@FastestIntegra thank you

[@claudioj7400]

I have a 2018 Jeep Compass limited. The turn signal lights work but the chime isn’t, Any idea how to fix it ?

[@FastestIntegra]

Something that new should be under warranty take it back to the dealer.. sorry.

[@jonhausler2179]

You’re the man

[@pistolmike791]

Question, had this issue except the left turn signal lights up. Pulled ignition fuse and replaced relay for flashers and everything works. Soon as I install the 40 amp ignition fuse, left flasher lights up and won't turn off. Flashers stop working and reverse lights come on. Wtf could this be

[@songsfromthelord888]

Remember, God loves you! 🙂🙂🙂

[@efraindiaz4466]

Thanks for sharing. Regards

[@hubbardengland3223]

Mine doing same thing but what if is the bulb