Turn Signal Doesn't Work QUICK Fix | 1999-2004 Jeep Grand Cherokee WJ

[@ghostcontactparanormal]

I have an issue with only the left blinker not working

[@LuisHernandez-hz6yu]

Same here did you figure it out ?

[@ghostcontactparanormal]

@@LuisHernandez-hz6yu yes it was a faulty turn signal flasher / relay.

[@GolfGrumpy]

​@@ghostcontactparanormalcan you tell me the part number and where you changed it? Mine is left also

[@fenderman1_407]

Both mine worked as they should for 2 years until about a month ago. It’s just the left and it’s almost like it will not work until she’s driven and warmed up. I Never have a left sig when I leave home in the morning but I ALWAYS have it when I’m 25 miles away turning into work. I’m so confused 😂

[@lonnababii]

Mine as well its only the left side

[@jswag4129]

Same as me literally the same thing

[@carolmatthews6817]

You could have saved some money. I took the advise of someone else and didn't need to by another relay. I took the old one apart and repaired the soder joints on the pins. Put it back together put it back in and everything worked. Saved 65$

[@WeekendWarrior-sn6jl]

100% - Can't find the original video I saw so I could thank the guy - but I pulled the part, popped it open, resoldered one connection, popped it back in, and now I'm changing lanes all day just because I can signal again! No cost - just 25 mins of my time.

[@Handle4570]

Weekend beer drinking money

[@kevinshanahan5535]

My WJ has 4 ways but no blinkers. It is blowing fuse #20. New blinker module didn’t help.

[@ChristopherGonzal72]

I did this and it wasnt the fix, did you have any luck? Or have any options?

[@fabricobbletech]

Yeah mine was definitely the module. Still working great. Are your blinkers working intermittently or what are your symptoms?

[@DavidBurke-h1b]

I have changed that relay, hazard relay and turn signal switch and still have nothing, anything else possible?

[@fabricobbletech]

Start at your fuse box and check power at each component working way out to the lights.

[@ovddemon]

Alright so I’m 16 I just bought a 04 Grand Cherokee and my left blinker doesn’t work is it the blinker module also?

[@fabricobbletech]

Entire left side front and back? Did you notice a hyper flash or very fast blinking on left side before it quit completely? If it’s one side only, the first thing I would check are the light bulbs. Inspect the bulb receptacles for corrosion. Make sure they’re making good contact. If only one bulb is working you should have a fast paced flash. When blinker module is issue it typically won’t blink in either direction. I’d check bulbs first. It’s also possible the switch itself is the culprit. Switch in part of the lever you flip to turn on the blinkers on left side of steering wheel. Hope this helps!

[@Amarillobymorning777]

Did it got fixed it???

[@GolfGrumpy]

​@@fabricobbletechm getting front left fast flash and no back left, right sides are working fine. Any ideas? It's seems to be random times :(

[@fabricobbletech]

@@GolfGrumpy back left bulb is either burnt out or poor connection

[@GolfGrumpy]

@@fabricobbletech thanks man yeah had to twist it around a bit in holder ty

[@danielvalles9554]

Mine fought tooth and fricken nail to stay in. I tried a long set of needle nose pliers, but ended up having to use channel locks, which was more effective.

[@initialb5009]

my wj has blown fuse 27 twice in a few days, the heater display and indicators are both run through it, its been fine for nearly a year since i bought it, the heater fan may need some rewiring as its temperamental, but is there anything else that could put a load on this fuse ?

[@fabricobbletech]

What I would recommend is trying to find a wiring diagram online somewhere. Find that particular circuit and test the culprits. Wiring issues can happen anywhere especially if a mouse gets involved

[@peeplead2]

Lol "quick fix"... hate to see what you deem a long fix lol. Cool vid tho, great instructions!

[@roberth912]

Man this is nothing try having to replace the radiator on one of these had to do mine 01 4.7

[@jeffpatton2]

What i did was turn my flashers on. While they are on i then put my blinker handle down into left turn position and turn flashers off and it works.

[@fabricobbletech]

It’s likely the bad flasher module just like mine was in this video. I could get my flashers to work the same way, intermittently, and only for a while. The hazards and turn signal are both controlled by the same single flasher module.

[@jeffpatton2]

@fabricobbletech im not saying it isn't a bad flasher module. Most likely that is the case. But that swems to get mine working now. I used to pull in the blinker stick or push on it and it may make it work but the flasher trick seems to work. Get you by until you can replace the module anyhow.

[@fabricobbletech]

@@jeffpatton2 I agree as that did the trick on mine for a while.

[@williamsmith151]

TOO MUCH