1999-2006 Silverado 1500 RedRock Cold Air Intake Review & Install

Improve the power and performance of your 1999-2006 5.3L V8 Silverado with a RedRock 4x4 Cold Air Intake. By replacing your Silverado's restrictive factory intake with a high flow filter assembly, you will see and feel a noticeable increase in rear wheel horsepower and torque. This RedRock 4x4 Intake not only improves airflow for an increase in power, but it will also add a show-winning appearance to the engine bay with its brightly-polished aluminum intake tube.
No Tune Required. RedRock 4x4 engineered its Cold Air Intake to improve the performance of your V8 Silverado without the need of reprogramming your computer. By utilizing flow dynamics, this Intake will increase power using the original factory tune. Even though a re-tune is not required for operation, AmericanTrucks recommends a custom tune to reprogram the vehicle's computer (ECU) to get the best possible performance from this Cold Air Intake.
Reusable Air Filter. The included high flow air filter effectively filters out power robbing particles with its multi-layer design. The specially-treated media creates a sticky surface to capture microscopic contaminants before they can enter your Silverado's engine and do harm. Seeing that the filter is reusable, there is no need to buy a new filter every few thousand miles. You can just clean the filter, re-oil it, and reinstall - saving yourself money in the long haul.
Simple Bolt-on Installation. RedRock 4x4 designed its Cold Air Intake kit to be a direct bolt-on replacement. With no special tools or extra modifications required, installation can be completed in under an hour. All parts and detailed instructions are included.
Not CARB Certified. This RedRock 4x4 Cold Air Intake is not CARB certified, therefore it is not legal for use in California or other states adopting California emission standards. Not legal for use on pollution controlled motor vehicles; not intended for highway use.
Application. This RedRock 4x4 Polished Cold Air Intake System is specifically designed to fit the 1999-2006 Chevrolet Silverado 1500 models equipped with the 5.3L V8 engine. amtrucks.at/3H6iLMA
0:00 - Review
3:03 - Tools Needed
3:20 - Install
Item S112853
----------------------------------------------------------------
🎞Subscribe for Daily Truck Videos: bit.ly/atcgrsubscribe
Stay in the loop for other truck content:
Instagram: bit.ly/2pReXWs
Facebook: bit.ly/2pBz6AC
AmericanTrucks.com is your home for everything truck! Our team of experts is here to help you find the newest and top mods for your Chevrolet Silverado, GMC Sierra, RAM, and Ford F150!

[@AmericanTrucksChevyGMC]

Shop this RedRock Cold Air Intake! : amtrucks.at/3H6iLMA

[@shaeschnelle95]

Hey, good news. At least I'm not the only one who took the bottom plate off and just placed the heat shield on lol

[@blownaway4371]

How 'bout a video showing a before and after of washing the air cleaner? My experience cleaning oil soaked dirt usually takes a soft brush of some sort. But the scrubbing destroys the 'element'!! How do YOU CLEAN ONE? I've used these 'washable' ones for decades but they die.

[@txkingg]

When are you doing content on the 3.0 Duramax?

[@AmericanTrucksChevyGMC]

As soon as our customers start buying more Duramax parts and we can get videos shot! -Zach

[@user-cp1rc5ok4z]

My coolent hoses are touching is it okay if it gets hot

[@KingDJL330]

My mass air flow sensor doesn’t have that slot to slide the filter on. Someone help!!!!

[@Timmy.johnson]

There's one on Amazon that looks exactly like this one and it costs like $60 same exact product

[@luisd.2184]

Where can a buy one of these?

[@AmericanTrucksChevyGMC]

Right here! www.americantrucks.com/speedform-silverado1500-cold-air-intake-s112851.html

[@crinner73]

What about the maf sensor. The oil jacks them up

[@AmericanTrucksChevyGMC]

You won't get oil on the MAF Sensor if you don't over-oil your filter after cleaning. 😁 Just let the filter dry all the way before re-installing and you'll be just fine. -Zach

[@cheyyotrujillo8177]

2001 v6 Silverado here, does anyone know if it requires a tune after install or if engine light comes on?

[@AmericanTrucksChevyGMC]

No tune is required with this cold air intake! -Zach

[@edddie5555]

I think it works for suburban 2006 right?

[@Kc-jr6cq]

Yeah

[@bigc2092]

Disconnecting the battery to put on a CAI is pointless 😂😂😂

[@AmericanTrucksChevyGMC]

Better safe than sorry! Especially if you're touching the AIT sensor. -Zach

[@Kc-jr6cq]

They cost like $300+ now

[@AmericanTrucksChevyGMC]

You can get this same kit for $119.99 on our site right now. 😉 -Zach

[@Cheesehead292]

Filter keeps on sliding off. Am I doing something wrong?

[@NIGHTMAY3R]

no youre not, mine is falling off every time i drive to or from work 6 miles away. i stippled the plastic part and put a screw through it ( not puncturing the interior plastic) and the thing is still falling off. literally pulled the screw out.

[@tomasrocha6021]

maybe bad clamp ?

[@bdtaylor1979]

You would be better off getting a plastic intake tube from Airaid for $160 and leaving the stock air box with the drop in K&N filter. That metal tube you installed plus the open cone filter are just going to absorb the heat and suck in the hot air from the engine bay.

[@ILLINIVIKE84]

Not true actually, the heat shield is designed to block out the engine bay heat and it’s all open below the filter so cool air flows in.

[@Peculiarsafe83]

@@ILLINIVIKE84If you’re gullible enough to believe that, then I’m Glad to know that they’re able to scam you out of your $100+.

[@aidanpeet2128]

@@ILLINIVIKE84you missed his point man. The aluminum air pipe is going to suck in heat from the engine bay which will heat up the air flowing into the intake

[@lonnieritz9692]

Exhaust wrap on aluminum tube problem solved 🤷🏻‍♂️ yeah it won't be shiny but it'll be cool.

[@Dtxmundo]

Lol 75 dollars on Amazon 😂😂

[@sawyerbennett8227]

They are definitely not the same. Not worth the extra money in my opinion but it does come with the coupler needed to install the maf sensor the eBay one you gave to reuse the factory coupler. No big deal

[@tomasrocha6021]

i got it for 65$

[@michaelfuller7635]

Me to. 😊