How To Replace Turn Signal Switch 04-08 Ford F150

Buy Now!
New Combination Switch from 1AAuto.com 1aau.to/ia/1AZT...
1A Auto shows you how to repair, install, fix, change or replace a broken, damaged, faded, worn or faulty turn signal stalk, high beam and wiper switch. This video is applicable to the 04, 05, 06, 07, 08 Ford F150.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oUo/1AX...
• 8mm Wrench 1aau.to/obB/1AX...
• 8mm Socket 1aau.to/oFE/1AX...
• 2 Jaw Gear Puller
• 7/32 Inch Socket 1aau.to/o2/1AXA...
• T50 Socket 1aau.to/omf/1AX...
• Ratchet 1aau.to/oU8/1AX...
• Pick 1aau.to/oe9/1AX...
For More Info visit us at 1aau.to/h/aBM/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@stevechekan7639]

OMG, , you do NOT need to remove the steering wheel. These guys are nuts. I have a 2008 F150, found another video that showed replacing it without removing the steering wheel, I just finished doing it, took 15 minutes. I can't believe I almost followed these instructions... lol

[@jamesbaucom9295]

I think this video just saved me several hundred in labor costs. You guys make this stuff seem so much easier than it first appears to be. Will be buying the part from you guys here shortly as thanks for the freely given education.

[@1AAuto]

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

[@jamesbaucom9295]

1A Auto Parts Part has just been ordered. What gets me is the dealer wants $156.29 for the exact same part and they wont even tell you how to install. Keep up the good work fellas!

[@johngirdner9106]

I am very happy with 1A auto because you stand behind your products with how-to videos and great parts. I replaced my 2004 f-150 multifunction switch with no issues. Thanks, JG

[@axobreil]

Thanks 1A Auto Parts! Just replaced the turn signal lever on my 06' F150. This video guided me through the entire way! Excellent! It's only fair to buy parts from 1A Auto after they share their knowledge and experience to help people out! Thumbs up!

[@1AAuto]

+Eduardo Gallardo Thank you for the support; we love hearing back from our customers! Thanks for watching. If any of our viewers needs to make this repair, we carry the part shown in this video on our website. Here's a link to them www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZbin&CTA%20Comment&ATony

[@bigchief8590]

Is there a video how to diagnose my stuck turn signal lever on my 2004 Ford Excursion? please help me need feedback, thanks.

[@BIGTOAST187.]

Brute 1985 you never mentioned if the steering wheel had to come off

[@ibajs2]

Just finished this job. I took my time and it took about an hour since it was my first time through. My 2006 was similar although the connections on the switch were slightly different, it was still nearly identical. I didn't have a spring in the switch although the switch and mounting bracket had 'nibs' for a spring to centre on. I don't know if I ever had a spring but I could find none that fell out and there was none in the old one. The new switch operates as the old one...minus the glitch it on the right turn signal...so I think all is good. Great video which I followed step by step using an iPad in my truck as I worked. I did not have or need a wheel puller...just give the wheel a good yank at top, bottom,right,left and repeat until loose, it won't take long.

[@1AAuto]

+ibajs2 Thanks for watching. If any of our viewers needs to make this repair, we carry the replacement headlights shown in this video on our website. Here's a link to them www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZbin&CTA%20Comment&ATony

[@davemarkellos6910]

Just attempted a spark plug change on a 07 Ford F150.....and I'm proud to say.....I GOT 4 OF THE PLUGS CHANGED!!!.....hey...baby steps...but at the same time cause of this video....I was able to change out that lever in 10 minutes flat.....THANK GOD!!!.....AND THANK YOU...

[@EdgarRodriguez-br7sn]

I have a Ford Expedition and I was able to remove it without removing the steering wheel. When removing the casing from top and bottom it extends a bit under the wheel, just tug it out.

[@1AAuto]

Thanks for watching our video! +Edgar Rodriguez

[@bsizzlehill2283]

Go to the youtube video where the guy does this without pulling the steering wheel. It was kind of hard to get a couple panels in and out but I did it today with some twisting and pulling pushing and cussing. It took anout 25 minutes.

[@mikehotchkiss8975]

Very nice. Quick, calm and no bs banter. Thank you

[@AntiqueCycles]

This sure made me feel MUCH MORE confident to replace my broken turn signal! Actually looking forward to doing it now! Thanks!

[@svweather]

The instruction is very clear and I was able to replace the switch without any issues. The part perfectly works on my 2004 Ford F-150. Highly recommended to follow exactly this video. Thank you, 1A Auto!

[@jasonurbina4925]

Sorry 1Aauto but I just installed a switch on my 08 f150 and the steering wheel removal is not necessary. Yes I had to manipulate the covers and bit to disassemble and again to install them but not anything impossible. Didn't break anything in the process. So just an FYI on this matter.

[@1AAuto]

+Jason Urbina Thanks for the feedback!

[@iamkazie9401]

How much hassle was it to replace the lever without removing the entire steering wheel? Thanks in advance!!

[@PaulGuenther-AZ]

Directions were perfect! My 12yr old daughter did all the work, I just observed. There was a slight difference between cables on 2007 and this model. Video was very thorough, Thanks!

[@1AAuto]

Paul Guenther We're glad the video helped you out. Thanks for watching. 1aauto.com 866-403-3393

[@saneauto]

Glad you said something about the spring.

[@alow2323]

saneauto what if I leave the spring out???

[@doctruth3335]

Thanks guy. Just replaced my signal on my 07 f-150. Excellent step by step instructions. Keep up the good work.

[@1AAuto]

Thank you for the great feedback! +Michael Anderson

[@ZipSnipe]

how much different was it compared to the video?

[@e4gail]

This saved me $350 to $400 in labor quoted by my local Ford dealer. Took me about 45 min on my 08 F150 XLT SCREW . Thank you!

[@1AAuto]

***** Thanks for watching 1aauto.com 866-403-3393

[@JohnBerry1]

This was an awesome video that saved me hundreds$$$ Woohoo! Just a quick suggestion though to put some tape around the driver and the 8mm screw when putting the airbag back into place. The screws fell inside the wheel and behind the airbag unit for me, so putting a little piece of electrical tape helped.

[@robertmelendez9734]

Didn’t even have to take off the steering wheel but I got it done thanks to 1a auto

[@ShaneWyatt]

Thanks guys! I bought the part from your website for my 2008 Lariat CrewCab. The connections on the switch was a bit different then this video, but the plugs were still easy and obvious. Everything else went exactly like the video. I would have never tackled this project without your video. Will definitely go to you guys 1st from now on. P.S. To other folks out there attempting this - I didn't have a 2 jaw puller, so I rented one (for free) from my local O'Reillys. They charge a deposit upfront and then give it all back when you return it.

[@tommychii]

zac gff !

[@larrycarterjr1974]

I didn't have to do any of the steering wheel removal this was above and beyond

[@spydergto1]

i wanted to say thank you very much for this video. i watched it a few times in preperation. my high beam pull to turn on stopped working. i ordered the part from your website, shipped fast. i watched your videos 4-5 times and then went to yee old harbour of fright to get the tools i was missing and this job actually went really really really incredibly smoothly in comparision to other things i have done. i am NOT a mechanic. when i got the old part off i found the lever was broken and it came all the way out. i did not have a spring however, im not sure if that will make a huge impact ? i re assembled and everything appears to be working flawlessly thank you again

[@Vatozulu]

Good video... Gives you an idea outline in what needs to be done. Few things different on a 2006 King Ranch Expedition.. The 2 piece plastic shell is held by the 2 screws for the lower piece and 1 screw for the upper.. Both Phillips head screws... So make sure yours doesn't have the screws up top and yank off it or you will damage the plastic.. Other than that... Worked like a charm... No jaw puller needed... Thanks for the help 1A

[@1AAuto]

+Vatozulu Thanks for checking us out. 1aauto.com

[@alow2323]

Used this very detailed video to change my combination switch on my 2005 Expedition. Few differences with screws but this video was great 👍 for walking someone step by step for someone who has never done the job!! 💯🔥 Great video 1A Auto👌👍😎

[@1AAuto]

+AJ Advay Thank you very much!

[@alow2323]

1A Auto Parts 👌👍

[@livenfree]

Thanks for the video! SO HELPFUL! Just took apart my 2005 F150 as the headlights were stuck on. I did not need a puller for the steering wheel. Just a few pulls and wiggles from top bottom to side to side and it popped right off. Biggest pain was the clips. take your time and watch the video closely The grey and red tabs are just security pieces that come out and clip in after the plug is in position I discovered. Used a magnetic bit holder and a driver for the air bag screws so they didn't fall down inside and stuck a piece of paper towel between the bit and the screw head to make sure it didn't fall out inside. Also mine was build 11/04 and that is the cut off for the different style switch. I wish I had seen your price before I bought the wrong one on Amazon. Followed another video to fix mine but the tab is so worn down that switches the brights on and off that for now I put it in off position and we just wont touch the bright lever. Just closer up showing the clips would help. I will check with you before I buy a part in the future.

[@1AAuto]

Thank you so much for the feedback! +Michigander

[@ReedSta4]

Just completed without removal of the wheel. The plastics are flexible enough to pop out with a little effort

[@1AAuto]

Thank you for the tips and for watching! +ReedSta4

[@marcobravo9108]

excellent video, just switched out the turn signal today Thanks

[@1AAuto]

+Marco Bravo Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZbin&CTA+Comment&N5IgaBLzmR4

[@MsWolf32]

Good video. One thing- I would test to make sure it works correctly before reassembling completely.

[@bqcaldwell99]

Absolutely. I did this exact same repair on my ‘07, and I actually overtightened the 8mm screws by the horn/airbag. My neighbors were none too pleased! 😳 All good now though!

[@donavanmahan8024]

Thanks for the video!!!! I recently ordered my switch and did the install today. Mine is an '08 so some of the wiring was a little different from the video but the meat of it was definitely there and I received the right part. Video made my life a lot easier and let me hang on to little bit of my money. I will definitely be using you guys again.

[@stanshepherd3545]

I hope the red clip on the airbag isn't essential....... Great video, I saved money and time. Thanks for posting this.

[@1AAuto]

+Stan Shepherd Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

[@williamlockwood6232]

Thank You! Didn't buy your switch but video was a breeze, there's another video without pulling the steering wheel but I opted to so I could clean all the plastics

[@kuttmowf]

You really don't need to remove the steering wheel and air bag. It's saves a lot of time

[@frantickfpv9784]

Dammit! Pulled everything off until I needed the T50 torx bit and 2 jaw puller.. LOL Thanks 4 posting this video

[@misterc13]

Thank you so much! Was able to accomplish this with your detailed instructions! Really appreciate it!

[@1AAuto]

+Cameron Williams No problem. Glad to hear it helped you out. 1aauto.com 866-403-3393

[@jamesbannerman4804]

As always gentlemen, great video.

[@1AAuto]

Thanks for watching

[@CaptainBootleg1]

This video was a huge help!!! Thank you. I just replaced mine in under an hour!

[@1AAuto]

+CaptainBootleg1 Congratulations on the successful repair. We're glad the video helped you out. 1aauto.com 866-403-3393

[@SubMasterT]

Thank you 1A Auto. Gonna tackle this project myself now. Whats the likely hood of me needing to replace this spring? On my turn signal when it clicks for the right side, the bulbs wont flash. When i turn the hazards on it wont flash unlesd the truck is off or i get halfway to turning the right signal on. Wanting ti tackle this this weekend

[@erwinroman4217]

Just found this, thank you. I suppose I can also replace the right side cruise switch module while I'm in there? My "Coast" button doesn't work. Well, it works once a year!

[@Bdurrant1966]

WOW...perfect video!! I can't believe I accomplished this myself with the guidance of your video!! You saved me hundreds! By the way, I bought my part online from 1A Auto....great price and fast shipping. THANK YOU GUYS!

[@1AAuto]

+Bob Durrant Glad we could help. Thanks for watching 1aauto.com 866-403-3393

[@marcheloskymedinama9808]

Thank you for all the videos you guys,it helps I’m no mechanic but whit this is very easy to fallow

[@1AAuto]

+Marchelosky Medinama Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

[@ag6401tx]

thanks for the video, it was a life saver, saved me a boat load of cash. we don't have a 1aauto parts in my area or else you would be my first stop.

[@1AAuto]

Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

[@creativesuit1930]

Good video, only thing I would have done differently is clean the battery terminals and connectors before reconnecting the battery

[@rominhawk3949]

Man, one heck of an excellent video presentation. Thank you 1A Auto.

[@1AAuto]

Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +Romin Hawk

[@tomwhite8276]

thanks a1. your video was on the money. it was easier than i thought thanks to you guys taking the time to educate us.T.W.

[@1AAuto]

+Tom White Thank you! We love empowering our viewers and showing how to perform DIY auto repairs!

[@jessesossamon7408]

Does this really require removing the steering wheel? Your video on the 05 Mountaineer is very similar yet the airbag and wheel stay on.

[@astro-hl3ym]

You can do it without removing the steering wheel but it’s a bit more difficult and you’ll almost break things I did it with the steering wheel on but if I had that puller I would’ve took it off just makes things easier

[@FunnelScientist]

Thanks for the awesome video with simple instructions. I just ordered off your website and will continue to support your biz. Thanks for supporting customers with this simple how to video. Great help!

[@1AAuto]

+Funnel Scientist No problem. Glad to hear it helped you out. 1aauto.com 866-403-3393

[@vancedeloatch6989]

Thanks for everything. These videos are so helpful. Keep them coming.

[@1AAuto]

Thanks for checking us out. 1aauto.com +Vance Deloatch

[@thetexasgreek]

Thank you very much for making & posting this video. Only drawback is I had never used a 2-jaw puller and didn't know what one was. Took a trip to the hardware store & then to the auto parts store to get the right one & then figure out how to use it. The first two wiring harness clips were a little tricky, and my turn signal switch wiring harness configuration was a little different but matched my 2006 F150. Couldn't have done it without you though.Thanks again!

[@rickynegrete4066]

What size 2 job puller

[@dvillarreal6289]

Thanks for the video! I did snap one of the retaining clips but it all worked out. I opted (stupidly) to buy the motorcraft part from my dealership. If it’s any consolation, I got screwed for almost double of what your company would have charged me. Lesson learned. I will buy from you next time. Thanks again!

[@dewaynedeel2731]

I didn't notice a spring. What would happen you don't replace the spring? I tried looking around and didn't find tha spring.

[@mariovaldez3974]

Could the turn signal switch be replaced on F150 with out removing steering wheel?

[@Snafuninja]

Thank you! Perfect video!

[@euro_pat]

Great Video, The Part was great too! Well done! 2008 F150

[@1AAuto]

+pat moon Thank you for your order. If you would like to leave us a review on Google it would be greatly appreciated. Here is a link to our reviews section. Have a great day! goo.gl/i5JFNY

[@johnkropp3793]

Doing this job on a 2005 Expedition limited. Did you just use the steering wheel bolt to snug the steering wheel back on once you lined it up with the shaft?

[@dalenolden1875]

Good video, thanks for making it so easy.

[@1AAuto]

+Dale Nolden You're welcome, glad we could help! 1aauto.com

[@MikelHubacek-br8ix]

You don’t have to pull the steering wheel to replace the switch it’s a little tricky to get the plastic from around the steering wheel but I’ve done many never pulled the battery cable the fuse or the steering wheel it’s about a 15 min job

[@doityourself329]

I did mine in ten minutes, just undo 5 screws and wiggle the plastic panels out.

[@thommartin309]

what shop wouldn't clean the battery terminals after doing a job like that?

[@Jsuarez6]

Very good video. Thanks!

[@1AAuto]

Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393

[@Jsuarez6]

1A Auto Parts Just finished installing the new turn signal switch! It was easier than I thought thanks to your well made video. In my 2006 truck one of the connectors on the switch is disconnected down below the steering column; the other two are placed just like in your video. Once again, thanks!

[@marioni33]

Excelente... justo lo que necesitaba... Muchas Gracias por compartir. ( Thanks for sharing. Just what I need )

[@lilihernandez405]

Gracias por el video fue nuestra guía para reemplazar la palanca de direccionales

[@OriginalRedneckRomeo]

Someone help me understand, when I pulled mine out, the spring fell out and it is like an inch and a half long, the one he put in seemed like is was only 3/4 long....

[@daveunik6457]

From Bill Garghill, do you have to remove the steering wheel on a 2007 FX2 Sport tor replace the switch?

[@pvenzELP]

Thanks , this video helped me out 👍

[@Lwrthnu64818]

Are we really going to ignore the fact thst this man took apegar the whole steering wheel LMFAO

[@randyrose1140]

Have replaced the switch twice now. First one had the issue with the lever not returning back from rt turn, and delayed wiper feature started activating eventhough it is in the off position. Customer service sent a replacement for that one. Awesome! But, now the replacement for the replacement is malfunctioning with the delayed wiper issue! Ugh!! Not sure what the issue is. Its as simple as unplug old switch then plug in the new. Is the only possible thing to fix the issue is to replace with Ford oem? Pricey! Anyone else have this issue w the wipers? If so, has anybody found a remedy? Thanks in advance.

[@eusebiogarza8080]

What is the little spring for

[@waynepeters4611]

Would a bad switch cause blow fuses

[@akwlb2]

is removing te steering wheel necessary or was it just done to work with open space?

[@michaelpadilla6380]

Ok I need some help...my right turn signal on the dash doesn't light up but I can hear the noise that it's blinking fast. I changed the signal bulb and put a new fuse and it still doesn't work. However, when I put the hazard lights on it works fine (light on dash and the signal blinking outside the car). Could it be the turn signal switch?

[@rickasbury1688]

Mine did not have that little spring in the bottom to transfer?

[@Jugedred80]

Thnks you save me $ did this on my own with your help though🙏🏻

[@1AAuto]

+carlos juan Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them: www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZbin&CTA+Comment&N5IgaBLzmR4

[@fastmph]

Why pull a fuse if battery is disconnected?

[@rafaelr3798]

At the 5:12 time in the video, you take the old spring from the turn signal and place it into the new turn signal. Do you sell this spring separately, mine has been stretched out. Is it necessary, what is it for. I plan on ordering the turn signal but this is my only delay. Thanks.

[@1AAuto]

We do not carry this spring. You might want to try the dealer or possibly your local salvage yard. Hope this helps you out. 1aauto.com 866-403-3393

[@Rdkill69]

My wipers get stuck on once in awhile or completely short out while using them. Also now my highbeam switch does not work either and the actual arm is loose, do you think replacing this whole piece would fix these issues?

[@cesar9496]

Yes it will fix everything.

[@Blendline]

I replaced mine on my truck and initially i made sure everything worked but when i put the plastic pieces all together i went to start the truck and now it just clicks it doesnt turn over. The dash starts acting all weird and i hear clicks coming from the fuse box, can you please help me im not understanding how it even happened it was all fine

[@1AAuto]

+Blendline Motorwerkz We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@dungmaker]

Can I replace my switch for a ranger with the f150 switch?

[@1AAuto]

+dungmaker The F150 switch will not fit on the Ranger. Thanks for checking us out!

[@sherriemcnutt1337]

I have a 2007 Expedition. Neither the wipers or the wiper fluid pump operate. Fuse is good. I'm thinking its the switch in the turn signal. What part do I need to order and will the Mountanier video apply?

[@1AAuto]

+Sherrie McNutt Thanks for watching, but unfortunately we do not have a turn signal switch that will fit on your 2007 Expedition! The Mountaineer will be a different process as well. 1aauto.com

[@alow2323]

Questions!!! What will happen if the spring isn’t swapped from the old to the new???

[@1AAuto]

+AJ Advay The spring should be replaced to avoid premature failure.

[@alejandrolopez3388]

gracias muy bien el video me ayudo en mucho gracias

[@nogears21]

Totally awesome video!!!!

[@1AAuto]

+Aaron T. Nelson Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

[@terjavec]

I have a 2008 E150. Would this solve the issue of my blinker not canceling?

[@1AAuto]

It may be due to a worn turn signal switch.

[@dianeadams4353]

Have a 2002 Navigator. While driving the radio turns off and the wipers go then radio back on. How do I change the wiring harness? I think wires are melted together.

[@1AAuto]

+Diane Adams Thank you for watching. Unfortunately we do not have a video for your application. We will keep this in mind for future repairs. That said, I would recommend checking your ground wire locations in the vehicle. Do a search for "ground locations" for your year, make, model. Weird stuff like this can definitely happen from a corroded, or loose ground strap somewhere in the vehicle. Good luck! www.1AAuto.com 866-403-3393

[@beanboozler6438]

You can do this without taking the steering wheel off

[@josearellano3268]

One question... I have a 2004 f150, and my turning signals turn on but then stop working... It may work for one click then I'll stop... I turn the hazerds and they work.... If I change the switch will this save my problem... Please respond....

[@josearellano3268]

Found the problem it was the flasher....

[@jesuscordova722]

Extremly helpful

[@1AAuto]

+Jesus Cordova Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/ford-f150-truck-turn-signal-and-wiper-switch-lever/i/1azts00207?KZbin&CTA+Comment&N5IgaBLzmR4

[@TheRealDJOsk]

Is it possible to remove only the plastic surrounding the switch, and not have to remove the steering wheel?

[@1AAuto]

+TheRealDJOsk Thank you for viewing! There are mounting bolts behind the steering wheel on these vehicles which would prevent replacement if the steering wheel is not removed. 1aauto.com

[@ryankincaid651]

I have an 06 Expedition. The switch on my vehicle "works" but it has no retention or "springiness" When I turn on my brights. it doesn't click and the arm can swing back and forth freely. It swings so much that often, the brights will be engaged when I use the turn signals. Should I replace the switch or is there a spring or clip that I can get to fix the issue?

[@1AAuto]

+Ryan Kincaid You may need to replace the switch if it is bad. Thanks for watching. 1aauto.com

[@carolinaservantes3698]

What size two jaw puller

[@oscarpastrana83]

nice I'm saving good money now thank you....;*)

[@1AAuto]

That's our goal. We're glad we could help you out. 1aauto.com 866-403-3393

[@hector971000]

Is taking the steering wheel off the only way¿

[@stephannerosquete2935]

What if I need a new spring, mine has been hanging there for a while and I think the spring has been stretched out.

[@1AAuto]

Thank you for watching. Unfortunately we do not have a video for your application. We will keep this repair in mind for future videos. 1aauto.com 888-844-3393

[@cruzgallegos6622]

I have the same spring problem any thoughts on this?

[@rbm11761]

Will this work for a 2004 Ford expedition?

[@1AAuto]

+rbm11761 Thanks for watching! The procedure is different on an Expedition. Here is a link to our site with the part, and there is a video for your application! www.1aauto.com/turn-signal-and-wiper-switch-lever/i/1azcc00176?f=375604&y=2004

[@lenyncristobal]

Hello what type of 2 jaw puller do i need to use what size of thread is it and where can i buy it?

[@1AAuto]

+lenyn cristobal You should be able to purchase one from your local auto parts store.

[@lenyncristobal]

1A Auto Parts what size do i need for this truck??

[@brotaterz606]

What do I do if I don’t have the jaw puller

[@jeremytarter]

Don’t have to take your steering wheel off. This video was VERY helpful, I rented jaw puller from Advance Auto, turns out though that I didn’t have any bolt holes to screw it into when I got to that point. Went back to the tube & found another video… surprised to find out, that I didn’t have to take the steering wheel off in the first place. May make it a little bit simpler to remove & then install the one plastic piece next to it, but it was easy enough with the steering wheel still there.

[@ramirezomar90]

can this be done without removing the airbag and steering wheel????????

[@1AAuto]

+ramirezomar90 Not to our knowledge. Thank you for checking us out on KZbin. 1aauto.com

[@frozenintime1009]

2008 f150 fx4--did it without pulling steering wheel ( bought the wrong type of puller) had to trim the plastic from bottom cover to get it to slide up and in, but can't even tell after reassembly.

[@Masterman5010]

It is possible you just gotta wrangle the shit of out the trim

[@Knightsguy]

What if I lost the spring . . .

[@butchgood183]

What size wheel puller?

[@1AAuto]

+Butch Good Thank you for watching. We used a two jaw puller, and they are available at any local auto part store. 1aauto.com

[@brandonpeterman9964]

There is no reason for you to remove the steering wheel that is unnecessary work. All this could've been done with the steering wheel installed

[@briangibson402]

Complete overkill. I dropped top and bottom column cover. It took me 20 minutes top.