√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*
@Adam-en5je9 ай бұрын
Amazing . You've got a doctor hands . I'm really enjoying watching this
@phel00495 жыл бұрын
I've been watching these over and over this is the best repair video I've ever seen. He's not fumbling around, he knows what he's doing
@slashpuff4 жыл бұрын
Passenger headlight retainer/holder was busted....went ahead and bought a new pair from these guys for about 200. They shipped in 3 days and I followed this video to change out both my headlights in about 2 hours. Awesome video and good deal on the parts. Thanks @1A Auto Parts
@wallylafferty11662 жыл бұрын
Instructions worked perfectly. Thanks for that!
@lope2085 жыл бұрын
Great video! FYI this was exactly the same procedure on my 2013 Prius. The dealer wanted $370 for an OEM headlight and over $400 for labor to install it! Found one on Amazon for $119 and did it myself. Thanks!
@1AAuto5 жыл бұрын
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +lope208
@jackjones36575 жыл бұрын
New dealer lights are indeed outrageously expensive.
@DougHNuts-ee3vn5 жыл бұрын
One more thing to consider. If you get moisture inside the headlights, check underneath that the black plastic shields in the fender wells are intact and any other plastic under there that may be loose/damaged/missing and fix that first. These plastic shrouds prevent water from splashing onto the backside of the lights.
@creepyZuck3 жыл бұрын
I blew on my phone because of your profile picture, thought there was an eyelash on it.
@noodlesfam3 жыл бұрын
Thank you! I was able to do this in 1.5 hours and I didn't have to take whole bumper off because I was replacing just the passenger side headlight. I took off the recommended screws/clips. But forgot the middle one..lol, However, I realized the right side of the bumper could be pulled back, which allowed me to access the headlight fine. It was a bit tricky to get it back in, but it worked out. I also agree, these bulbs on the passenger side are very difficult to change, which is the reason why I had to replace the headlight. I has installed the bulb in wrong and it melted the plastic housing around it. Again, Thanks!
@1AAuto3 жыл бұрын
+Van Tran Thanks for the feedback!
@michaelfaust79774 жыл бұрын
This was an excellent instructional video. Very accurate and to the point. When I saw I would be removing my car bumper, I thought I may be in over my head. As it turns out, the seemless directions make it easy.
@1AAuto4 жыл бұрын
+Michael Faust Thanks for checking us out!
@craighopps61434 жыл бұрын
Thank you for the clear instructions! My wife and I managed to trade out the headlights on her 2011 Prius in about an hour's time. Just followed your video step by step and next thing we knew, we were done!
@1AAuto4 жыл бұрын
+Craig Hopps Thanks for checking us out!
@leridasanchez133628 күн бұрын
Just did mines, in less than 1.30h! Pretty easy stuff :) Thanks
@martpierce71612 жыл бұрын
I have a 2010 Prius. Where can I order a full set of the replacement clips? I know when I start taking the original clips most will be brittle and break. It never fails. Great video.
@lowtek426 жыл бұрын
Thank you for the video!! Followed along and just finished replacing my headlights! Took about an hour to complete. Did not raise the car, just laid down in the driveway. :)
@1AAuto6 жыл бұрын
+Lo Mo Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/2010-11-toyota-prius-headlight-pair/i/1alhp00885?KZbin&CTA+Comment&CanGdHFISg
@voeutvong4153 Жыл бұрын
Great video was able to replace both headlights by just simply following this video. Thanks!
@johnlangenbach71614 жыл бұрын
Saved myself a lot of money with this video. Wasn't easy but I got it done thanks!
@jimmcdonald96185 жыл бұрын
My God. All i wanted to do was remove the headlights so i could undercoat the car properly, as i have done with other cars. Her car (girlfriends car),is a few weeks old so i did that part of the job with my extension wands. This is a lot of work. I'll wait till spring when the car is a few months older to do this..you can see from this video,all the surfaces to be coated.. (i've checked on my neighbors new Corolla what the dealer did and they don't do these inner areas) why i do my own. Takes me a day to do it all. THANK YOU VERY VERY MUCH FOR THIS VIDEO. i won't break any clips and get this done. Yes, outstanding video. thanks.
@1AAuto5 жыл бұрын
+Jim Mcdonald Thank you so much for the feedback!
@DougHNuts-ee3vn5 жыл бұрын
I purchased a universal plastic clip kit on ebay for under $20 with like 450 various clips in it. I'd suggest you always have this kit on hand when working with plastic clips because they are easy to break.
@kurtpetrey2 жыл бұрын
Great video. I watched several but this made switching out the headlights incredibly easy. I wouldn't have done it without this video. I will use 1A Auto in the future.
@rishideo81852 жыл бұрын
That you for instructions, it really helped me changing my cars 🚗 headlights by my self. Appreciated 👌😊
@strongjohn70783 жыл бұрын
Outstanding information. Start to finish hour and a half. Saved some major bucks skipping the dealer. Thanks so much
@kevinwest20443 жыл бұрын
Just did this myself, only took me 3 hours, ( i'm new at this) thanks for making it easy to follow! and for helping me save money!
@strongjohn70783 жыл бұрын
I’m about to tackle this job. Any specific thing I shoul be cautious of. No jacks going to keep it flat in the garage but I know lifting would be easier. Thanks
@kevinwest20443 жыл бұрын
Tips yes, these helped me 1. The clips, pry the center out before trying to pop them off if you don’t have a tool. Trust me it’ll save you time lol 2. When popping off the front fender from the side work your way in from the wheel well don’t force it too much 3. If you touch the bulbs wipe them off with a rag when putting them into the new housing. 4. Do one headlight housing at a time. If you can, have someone hold the fender and don’t take it completely off, fenders can be a huge pain in the ass putting them back in. All are tips when I did mine, my neighbor worked at a shop so he helped/ told me all of the above that I told you. 5. Sorry this is out of order now haha, label everything so you don’t lose track of clips some are longer than others. I labeled and laid them out like an assembly so putting them back together was just in reverse order but whatever works for you Good luck man :) have fun!
@kevinkearns41644 жыл бұрын
Awesome video, literally had the headlight out in 10 minutes. Found out the light bulb had melted the plastic holder and that is why I could not get the bulb in correctly. You then have to buy a new headlight.
@ppiyush16 жыл бұрын
Outstanding DIY video.
@farhatabbas2834 жыл бұрын
Thanks for putting me wise, you explained all the steps very nicely, picture quality was very good.
@mattches5804 жыл бұрын
Great video. Your efficiency, clarity and thoroughness should be emulated by more youtubers. You might change the title to "Headlight Assembly" so that it comes up in searches and you don't get all the bulb replacement traffic. Would love to see a video of installing after market fog lights & wiring kit on Generation 3 prius.
@1AAuto4 жыл бұрын
+Matt Ches Thank you for the feedback! You do make a great point about the title and making it easier to search for.
@mrvic921543 жыл бұрын
I was able to remove the headlights without having to remove all the bottom bolts I only removed the two bolts under the wheel well and the three bolts that hold the light fixture on to the frame and it was rather easy thanks for the video it helped me a great deal
@chas3333 жыл бұрын
Thanks! Ordering my headlight from your site now.
@1AAuto3 жыл бұрын
+Charles Nowell Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@SBotts5 жыл бұрын
Thank you very much! I really appreciate the details and the tips!
@1AAuto5 жыл бұрын
Thanks for checking us out. 1aauto.com +S Simons
@lukhichintan6 жыл бұрын
Hi, thanks for the video. It's very useful. I have questions. 1)Before taking the motor out, should we keep the light alignment to purticular point? I.e. 0 to 4 2) after fitment at which alignment point we should keep it, before doing beam alignment. I.e.0 to 4. 3) for my case, one side light is giving upper up and other is way down. How can I fix it? It's has a motor and manual adjustment.
@lukhichintan6 жыл бұрын
Ohhhh sorry, the level of adjustments available are from 0 to 5.
@Dr.Gunsmith3 жыл бұрын
Omg, just bought new headlights, did not realise I had to take the whole front end off 😂
@Charkatak4 жыл бұрын
I have a different brand car, than shown in the video...anyway I took the car to my dealer for bulb/headlight replacement and upon picking up the car, I noticed gaps between headlight assembly and fender in 3 different spots. It seems that after replacing the headlight, techs just bolted headlight in without even re-adjusting it so it would sit properly with the fender and have even gaps all around. I talked to their head manager and he asked techs to work on this and correct the issue. I explicitly asked them to match the passenger side as it was never touched previously by their techs. What do you think...I took the car back and saw that they made it much worse than it was! The tech decided to adjust the fender so it would close the gap between itself and headlight. Now, the top of the headlight doesn't have any gaps(it should have a bit) between the fender and to fill the gap, they used a single sided foam tape! Pushed the fender towards the hood so much, that it went 4 mm lower than the hood and now pretty much rubbing it. I asked them what on earth were you doing and made this thing even worse?! The regional manager wanted to ask the guys to correct the issue, but I stopped him as my car would be third the victim of their techs! I was so upset + I paid for the headlight replacement and at the end I would have to fix it myself. :(
@afuturodigital10594 жыл бұрын
Thank you for the video Great
@1AAuto4 жыл бұрын
+A futuro Digital Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
@jeromemikell96255 жыл бұрын
Must be what we call a "Yankee car". Never seen so much rust...Great video, especially the bumper removal.
@1AAuto5 жыл бұрын
+Jerome Mikell Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
@typhoon320i3 жыл бұрын
Would this be the same for a 2012? I see the bumper design is a little different.
@Albertink6 жыл бұрын
Can the glass/ Plastic on the headlight be cleaned from the inside or simply replaced? I used to clean the glass on the head lights of my Saab 900 SE 96.
@1AAuto6 жыл бұрын
+Albert Ink Hello, there are kits out there that claim to 'recondition' the lenses, but in our experience, the effect lasts a couple of weeks and sometimes ends up worse than before. 1AAuto.com
@ProfessionalGasLighting3 жыл бұрын
The wire connecting to the blinker light socket has ripped due to weather, I was wondering where I could get that socket? I have heard the most common thing to do is splice the wires into a new socket for the bulb
@chadalahio82663 жыл бұрын
So there is no separate ballast for a 2011 Prius? I just ordered a ballast for a 2011 from a company that said it fits but I just pulled out the light and there’s no place for the ballast.
@tienluong47294 жыл бұрын
I having a hard time replacing my 04 prius headlight housing on the passenger housing. The entire housing is damage. I bought the new housing for it but now the ballast is giving problem. There is no hole for the ballast wires to go through it. I wonder what would you do with it. Thanks
@pistillocien63753 жыл бұрын
Thank you!
@wazeemmohamed38194 жыл бұрын
My car is 2013 is there any possibility to change the led headlights witch is comes for some persona edition
@AirbornAE2 жыл бұрын
Well explain 👍
@mikelauro93915 жыл бұрын
Great job
@1AAuto5 жыл бұрын
Thanks for checking us out! +Mike Lauro
@sadriadili2792 Жыл бұрын
Thanks
@DougHNuts-ee3vn5 жыл бұрын
I think I'll specialize in Toyota repair. I think they must be the easiest brand to wrench on.
@JE-zl6uy5 жыл бұрын
I don't know much about cars, but I had to replace the battery in my Prius vs my father's Equinox... Dear GM: Why did you make something as simple as a battery replacement so bloody difficult? Also... why do you use T15 Screws for the friggin' air filter when everyone else just uses clips!?
@picsosil4 жыл бұрын
I wonder if it's possible to just bend the bumper cover open enough to slip a small socket in there and unscrew that one headlamp bolt without removing the entire cover... probably a bad idea to try...
@picsosil4 жыл бұрын
Hey - I just tried, and it worked. Kinda.. It was actually no problem getting the bottom headlight bolt off. It took a lot of finesse to remove the lamp fixture while the bumper was still mostly in place, but after working it for a bit, I was able to get it out. And then it took ever more to get the new one in place - but again, it was possible after enough wiggling and jamming. In the end, I got the job done without doing any damage, and probably a bit quicker that it would have been to remove the whole thing. I probably wouldn't recommend it if your car is pristine, but for my old beater, I'm glad I did it. Thanks for the video - it was very helpful along the way.
@1AAuto4 жыл бұрын
+picsosil Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
@taimoorkhan88814 жыл бұрын
How to adjust led lights ?
@1AAuto4 жыл бұрын
+Taimoor Khan There are adjustment screws on the back of the headlights.
@joshuamoore10912 жыл бұрын
"use a flathead screwdriver from 1Aauto" lol
@nowayjose35796 жыл бұрын
Sweet!
@miner4life628 Жыл бұрын
Jesus! all that to remove a headlight! 😮 😂😂😂 I’ll just have mine rebuffed to make it look new.
@GY10259605 жыл бұрын
A gread video from 1A Auto as usual, but far too much to go thru for a bulb change! Toyota should do better with design really. However, you may want to try the following procedure before taking off the front bumper: - First, fit the bulb on the easier side first. Get to know the angle the bulb goes in and twist it to secure with a nice and sweet click; - The other side works with the SAME ANGLE. Repeat the process for the other side with the harness disconnected (otherwise it's very hard to get the bulb properly in)! Then connect the harness and job done!
@1AAuto5 жыл бұрын
+AG Yu Thank you for your feedback!
@oatmealcookies9162 жыл бұрын
This is a ridiculous amount of work just to replace a headlight wtf was toyota thinking when they design this car.
@jaloux8583 Жыл бұрын
It’s actually pretty easy and 10min work tops, now putting it back together would’ve been easy, except for those plastic clips.
@jaloux8583 Жыл бұрын
Those plastic clips are trash and break if you look at them.
@JoseRodriguez-kw9ez4 жыл бұрын
All this to replace a light bulb
@sleeplessstu5 жыл бұрын
This is crazy. Just unscrew the end of the air intake hose and coolant hose. Remove old bulb from behind. It a little tight but if you put the bulb in first and then hook the bridle up afterward it's a 5 minute job. Bulb costs $18.00.
@phel00495 жыл бұрын
This video isn't to replace just the bulbs, it's to replace the whole headlight