How to Replace a Transmission Mount on a 2003-08 Mazda 6

Buy Now!
New Transmission Mount from 1AAuto.com 1aau.to/ia/1ATMT00112
1A Auto shows you how to remove, install, change or replace a broken or worn out transmission mount. This video is applicable to the 03, 04, 05, 06, 07, 08 Mazda 6.
🔧 List of tools used:
• 10mm Socket 1aau.to/oJ5/1AXAA00017
• 15mm Socket 1aau.to/oQm/1AXAA00015
• 17mm Socket 1aau.to/oQm/1AXAA00015
• Needle nose pliers 1aau.to/oit/1AXAA00051
• Needle nose pliers 1aau.to/oit/1AXAA00052
• 1/2 Inch Breaker Bar 1aau.to/ohU/1AXAA00078
• Torque Wrench 1aau.to/oqC/1AXAA00044
• Rust Penetrant
• Floor Jack 1aau.to/ooY/1AXAA00068
• Hammer 1aau.to/oie/1AXAA00091
• Jack Stands 1aau.to/opc/1AXAA00065
For More Info visit us at 1aau.to/h/aLu/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@hermancasnave8767]

I have bump in the body

[@mauriciopalafox3060]

The specified torques are Bolt A,B,C 66.6-93.1 Nm or 49.2-68.6 ft-lbf and Bolt D 85.3-116.6 Nm or 62.9-89.9 ft-lbf According to the original workshop manual, I hope it really helps you,

[@mariogonzalez5566]

I dont know who"s give you thumps down, all your videos are exelent help me alot whit my 3 diferent cars when i fixed, thank you soo much, i really i glad and happy, 😊😊😊 God bless you

[@boo9681]

Your work is so clean and helpfull

[@stancetv2005]

Is the left transmission mount the same part number for an automatic and manual transmission on the 2.3l by any chance?

[@carloscholula7320]

Hi sue what are the size of the transmission mounting nuts? One of my transmission mounting nuts is damaged badly and I want to change it but don’t know the size of it.

[@peteratanasov5954]

Do you have this aluminum spacers? I need them

[@djockeydublin1225]

Are there signs of when to replace this particular mount?

[@carlosbanegas7577]

thank you very much

[@ChaseRzz]

How many mounts does the Mazda 6 have? I have the 2.3l 4 Cylinder.

[@Thor312full]

Thanks

[@zacheryroberts4135]

Sorry if this is a dumb question but will this apply to the manual transmission with the 3.0L V6?

[@1AAuto]

+Zachery Roberts According to the specifications on the item listing, this part will only fit models with a manual transmission.

[@temo801m]

thanks good video do you have or are you planning on doing a transmission replace on this car

[@1AAuto]

Thanks for checking us out. 1aauto.com +temo may

[@xandervk2371]

Where exactly do you support the transmission from below? No one seems to show this very essential step in replacing the mount.

[@MyriadVidz]

They literally show you at 4:33...

[@michaeldamico5152]

Have you produced a video for replacing the "Dog Bone" motor mount that is toward the bottom rear of the Mazda 6 engine?

[@1AAuto]

+Michael D'Amico We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c

[@michaeldamico4285]

@@1AAuto I notice that the Rear Engine Mount (also called the "Wishbone" mount) that 1A Auto sells for the Mazda 6 has a bracket attached to it. Other suppliers don't sell the bracket with it. I assume that it is easier to remove the mount AND the bracket rather than just the mount. Would someone please publish what the torque specs are for installing this mount once you re-install it? I realize that you can't do a video on every single type of repair, but since you already have a video on the Transmission Mount, it only makes sense that a person would also need to replace the other two mounts if they still have a 17 year old 2005 Mazda 6 like I do. It's easy enough to remove the mount; I just need the torque specs for the bolts that we have to replace after we get the mount in position. Thank you for your help.

[@supernatural82]

The guide is good but you miss one very important part. Torque specs for the mounting bolts in the mount. Overlooking this detail can cause over-tightening or under-tightening which can potentially cause negative results long-term.

[@1AAuto]

+supernatural82 Thanks for the tip! We'll pass this info along to our production team.

[@vegan-rising]

this is cool, but it would be better to show the reason for changing it in the first place.