How to Replace Front Door Lock Cylinder 05-11 Honda Civic

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@InspiredPhotons]

Thanks! Superb detail that gave me the confidence to buy a cheap set of tools and save a couple hundred dollars on labor. Was a breeze to replace the cylinder after watching this instructional!

[@ghc_gto_6.0]

I just did this job today I was done with everything in 30 min… I bought my door lock cylinder through Honda with the cable and 2 keys shipped to my door $100.. great video made the job super easy on my end thanks!!

[@ericnguyen1726]

Very clear presentation. I love all 1A Auto videos. They're all awesome. Thanks a lot.

[@DailyUpdate808]

Awesome video. Only took a few minutes to change out. Very good walkthrough with detailed cues to look for. Made the job smooth and simple. Now i can lock my doors without getting locked outside

[@Idahomie]

Very good video, good quality, comprehensive, good technician/shop. You might want to re-label this comprehensive vid to "Drivers Door Lock and Related Parts Repair".

[@1AAuto]

+GKT Thank you for your positive feedback! We are happy we could help.

[@kademacneille9877]

Thanks for posting this video! It saved me a ton of stress and money.

[@johns6471]

The video is very clear !!! If I had to take it somewhere would I take it to a mechanic or a body shop ? Thank you

[@thumperkc]

This repair is a little intimidating.

[@1AAuto]

Just follow the step by step and you will be fine! Thanks for checking us out. 1aauto.com +Kelly Cahill

[@thumperkc]

1A Auto Parts aw thanks for the optimism! Lol I’m going to attempt it this weekend. Thank you so much for the video

[@doom453]

@@thumperkc might be a little late but was it possible? Thinking about doing it myself

[@gtrob1]

@@thumperkc How'd it go?

[@robn1y2]

Oh that’s such an understatement

[@earniemalumpkiss3846]

Hey I’m having a hard time finding this part for a two door do you know if they are the same part?

[@blackcti]

Thank you for superb detail! Saved us

[@lesio333]

To remove the lock cylinder you don't touch the 2 screws you showed. You have to remove 3 little screws on the opposite side from the plastic casing and then the C clip (retaining clip? )

[@dancupryk9661]

So if you just want to remove the lock cylinder, you don't need to remove the actuator - because once the lock cylinder bracket is off you can pull the cable to an opening in the door and then have access to the 3 screws on the lock cylinder. Do you agree?

[@dancupryk9661]

I just completed this. My goal was just to get the lock cylinder to a locksmith (actuator worked fine). My key would not turn either way so was unable to turn off security alarm. Took off lock cylinder bracket, pulled the cable/bracket to opening, then removed the 3 screws from the cable plastic casing, then took the lock cylinder/bracket to locksmith to rekey the lock. Also, did not have to remove the rod from door handle to actuator.

[@staticdbz]

if you just wanted to turn off the security alarm, there is a much easier and simpler way: disconnect the fuse for the horn

[@byronfowlkes7201]

@@dancupryk9661 once you took cylinder out did alram go off?

[@bhupindersingh1413]

I second this. Did it today. The 3 screws do the trick. And no alarm went off but I didn't take it off completely. The wire is flexible enough to access the screws

[@pat-danielmuir9219]

Great Demo

[@Choochoojr]

2 things 1 if my alarm system is stuck set on bc my key cylinder went out could I use a screw driver to turn the actuator to make the alarm disengage? For short term fix ? And also when replacing does the key have to be coded with the lock or does it not matter what locking mechanism as long as it fits correctly and has separate keys

[@DG-ru1sl]

Having similar issue what did u do to end up fixing this issue ?everytime I open door alarm goes off because key won’t turn to unlock on car door cylinder, no remote to lock/unlock either

[@thefelixpinon]

The best video thanks

[@Brandon_Rdzl]

Gracias a tus videos eh podido solucionar varios detalles de mi civic. aunque el mio es Coupe pero de cierta manera es igual 😅

[@izzycamaro]

Great video, Have a great day.

[@mariarodriguez-ud9hq]

Thanx, AWESOME DETAILED PROCEDURE!! 😉🙄

[@gilbertobonilla5207]

very good bro 👏

[@vincentwong1060]

Top Notch Video Demo AAAAA+++++ Thank You

[@1AAuto]

+Vincent Wong Thanks for checking us out! 1AAuto.com

[@chieflouie2821]

Any videos for rear civic doors?

[@JuanPerez-os6uq]

Excelente Job but I have a question about the cable it’s the same for the front right door or has to be diferent reply please and thank you

[@dogbounty6399]

good video... one more door panel screw under the switch panel,

[@dominickguty2157]

Me costo un poco pero lo hice gracias maestro

[@marcratelle5368]

Does this work on a civic 2010 DX-A? The doors lock aren't electric on that model. Also, thanks a lot for the tutorial, you guys did a great job!

[@1AAuto]

+Marc Ratelle We currently do not have an auto repair video specific to your vehicle. You might be able to apply some of the basic steps shown in this video to your application. 1aauto.com

[@JayskiiTV]

I did everything how you did it but when i pull On my door handle it will not move now

[@jalmerc24]

Is it the same procedure for the front passenger door?

[@1AAuto]

+jalmerc24 Thanks for watching! Yes it should be the same for the passenger side door.

[@eloinagarcia3039]

Thank you you're doing a good job

[@madridgevara9484]

How did you get window up

[@SenorStigo]

I have a beater Civic 2010 that someone tried to steal and they broke the lock. Because of that every time I go to an event I have to unlock the driver side from the passenger side. I just replaced the cylinder and it took me about 90 minutes and everything works perfectly even though the process was a little different (DX model)

[@maxramirez5009]

I need that part, does anyone know where I can get it, I need it please

[@harjeetdevgan7002]

Thank you so much

[@1AAuto]

+Harjeet Devgan Thanks for checking us out! 1AAuto.com

[@MelindaSteffen]

Wow great video! Thank you so much! You've saved me a lot of money

[@missnikoco3747]

is the car window removed first?

[@fabianolalde6719]

If the key doest Open the door even with keyless control what should be the problems actuaror or key cylinder to openen need turn the key and push unlock on the control to open

[@wallym3765]

Just replaced my door cause accident and swapped the lock now it dont turn with key at all and doors lock and unlock while driving any suggestions

[@1AAuto]

+wally m Thanks for watching! The door lock cylinder will not match your existing key, so you will need to get that sorted out first. That other issues could be caused by a number of things, but we are not able to diagnose an issue like that over the internet.

[@wallym3765]

I replaced door lock from original door into the new door

[@allison447]

Good video great mic too many ads

[@Whitemask678]

Good video dear

[@t.s.gilmer8397]

Nothing like being stuck in a car when it catches fire

[@mariaabrego6336]

What would I need to do if my door closes by accident in the middle of this? Because that is just what happened to me now. I’m trying to figure out how to open my door!!😬

[@UserCommenter]

Aww sorry! Did you figure this out Maria?

[@markfinn4811]

me to

[@aliaygun9975]

İf anyone else lock themself with the panel off all you got to do is pull on the wire that was connected to the door handle and it will open..

[@Danielson3089]

I'm having a hard time securing the door lock. It's not flesh on the outside. I'm holding the door handle from the outside, but it's not clicking on.

[@BonafideKennels]

Help I did this now the key unlocks but it won’t lock the doors

[@familyofislam]

What if I cant open the door because it won't unlock??

[@NoTfRoMThIsPlAnEt90]

Take the bolts out of the handle and under the window master switch. Unhook the window switch. And grab the bottom of the door with the window rolled down and pull up as hard and as fast as you can. I had a problem with the right side of thre panel. I used gloves and pried it open with my fingers and a screw driver by the speaker... Then it's pretty easy after that. Sorry i suck at explaining shit 😕😂

[@robertrobertson8575]

So if the lock cylinder itself is messed up you're really going to need to take it to the dealership?

[@1AAuto]

+Robert Robertson Thanks for watching! Yes if you need to replace the lock cylinder you will have to take it to the dealer. 1aauto.com

[@drkcurve8236]

@@1AAuto why? Is it because they need to program something?

[@magma9999]

While removing it the little cap fell in the door..i just cant find it

[@AmineSekiou31]

SVP la réparation coûte combien ?

[@unixedu887]

do one for a 2012 accord. those things break constantly

[@1AAuto]

+UnixEDU Thank you for checking us out. We will keep this in mind for a future video! 1aauto.com

[@TONYSTARK-jh2wu]

It's a small push clip but you didn't push it in you pulled it out...

[@bradt9350]

You can pull out the center pin OR push it in and release it. Pushing the pin in DOES also release the pressure on the clip and after you get it out of the door, You can then push the pin back out 2 clicks and it can now be inserted and snapped back in with one click and it is locked when it is flush again... Try it and you will see

[@ashrafpp7639]

Cable available

[@0meat]

What the frick Honda, unservicable is not a security feature. I bet you can replace those cylinder screws at a hardware store.

[@raiderrichard7291]

Do I have to replace the lock if it’s just my door handle that broke. Because my lock works fine, it’s just the cheap plastic handle that broke. The handle comes out but doesn’t retract back into the door. It also doesn’t pull on any cable when I go ahead and try to open it. It’s just loose springless. Cheap plastic. They can’t even make door handles these days! They’re ww2 Jeep’s that still have a functioning door handle. Hell there’s even model t’s with the original working door handle. I love Honda but c’mon guys! You knew these were going to brake in a matter of time. Smh

[@Milo13732]

I feel like car company couldve designed doors better

[@imran4811]

I might as well get my key made from lock smith only 50$ 😂

[@TheBM213]

Can't remove my cylinder 😅

[@JohnSmith-vq1kf]

hate the FLAT KEY...crooks use that to get into my Honda Civic 89....

[@shanelongest9326]

No way I'm doing this 🤣