1GR-FE V6 4.0L Engine Rebuild || Head Gasket Replacement || Timing Chain Install Of Toyota Tundra

[@Taher81]

Smooooooth masha allah , no ticking noise, please do a video fixing the lifters noise in the same engine

[@MayoCarsDR]

Thanks for comment

[@espartako30]

How to reduce the ticking noise?

[@independentcontactors339]

Lifter noise is good. These clearances get tighter over time...unless a cam bearing wears out then it gets looser. Also the timing chain slaps makes noise. Noise = good

[@JAMESWUERTELE]

5w-40 Redline full synthetic oil fixes a lot of the normal noise.

[@KannanKannan-y1j]

​@MayoCarsDR Hi bro iam same engine fix. But left side tapet same sound coming

[@DH4Doose]

You are amazing. You don't say a word but I come away with a better understanding of details than most other videos where they talk non-stop. Excellent work. Your videos have helped me a lot and are very appreciated.

[@MayoCarsDR]

Thanks for comment

[@gersonhay984]

great videos.

[@MayoCarsDR]

Thanks for comment

[@gersonhay984]

@@MayoCarsDR You deserve it. Keep up the great work.

[@T.Diagnosis]

Great video. Ur video has really helped me so far but the only problem I'm having now is the head gasket where can I get head gesket for this engine over here.

[@MayoCarsDR]

Where are you located

[@T.Diagnosis]

@@MayoCarsDR African Nigeria.

[@سالمحمود-ق8ق]

ماشاء الله تبارك الرحمن. ممتاز جدا

[@MayoCarsDR]

Thanks for comment

[@wernerndarasirongo8642]

Beautiful work, thank you very much.....

[@MayoCarsDR]

You welcome Thanks for comment

[@andyg5004]

Excellent work. Ustad 2UZfe vvti oil filter replacement please next

[@MayoCarsDR]

Thanks for comment

[@vanhoang3850]

Very good job 👌

[@MayoCarsDR]

Thanks for comment

[@EpicFlippers]

After torquing head bolts at 36N*M, do you keep the same torque setting for 90 degree turns?

[@MayoCarsDR]

No

[@EpicFlippers]

@@MayoCarsDR Thanks for your response. Are the 90 degree turns done without a torque setting set?

[@dougaustintx]

Only problem I saw on this video is that you failed to put the two short strips of sealer both above and below the edge of the head gasket at the location where the head and block meet the front timing cover. Toyota says this is a "Must Do" to avoid oil leaks at those two locations. Otherwise I really enjoy your videos and appreciate the work you do.

[@MayoCarsDR]

You see Complete Video

[@populationentertainment460]

@dougaustintx what type of sealer do I use for this application?

[@dougaustintx]

Use the real Toyota fipg sealer in a tube. It's about $24, and one tube will so a complete engine.​@@populationentertainment460

[@Avatheskibidiaplphadog]

I notice you didn't put silicone on the head gasket.Are you supposed to

[@MayoCarsDR]

I have applied the silicone but could not make a video

[@Avatheskibidiaplphadog]

@MayoCarsDR say , someone forgot to put on silicone , what would happen? I think you know what I'm aiming at , lol but added silicone on the cylinder head edges .

[@independentcontactors339]

Um I went 180 after the first torque on my heads...instead of 90 then 90. Think it will be OK? Iam about to install timing cover

[@MayoCarsDR]

Ok

[@zachbausch5886]

No RTV on any of the Gaskets? Service manual shows several spots to use RTV with gaskets such as the head and timing cover.

[@mdtowhiw287]

Excellent 🤙

[@MayoCarsDR]

Thanks for comment

[@jahjah4643]

I plan to do one by myself, would like to know the amount of torque to each bolt or bearing

[@MayoCarsDR]

1GR-FE 4.0L Engine Rebuild Repair Manual 📚kzbin.info/www/bejne/i2irnoKmbcSWnNk

[@mohammadtkhan5879]

Excellent

[@MayoCarsDR]

Thanks for comment

[@markgarcia8552]

Are you in California

[@MayoCarsDR]

No

[@busterboyd4125]

Why is he oiling the bolts?

[@MayoCarsDR]

Applying oil keeps the bolts tight without making any noise

[@busterboyd4125]

@@MayoCarsDR I'd be concerned that the oil messes up the torque specs. I know with modern spark plugs they tell you not to apply anti-seize because it can throw off torque wrench specs.

[@dougaustintx]

Actually I see the sealer on the second head gasket. I guess you just didn't film the application of the sealer!!

[@MayoCarsDR]

You see 8:10

[@KannanKannan-y1j]

Hi