1S 3" Baby Tooth w/ 2400mah - how long?

Details about the Baby Tooth 1S 3" build: bit.ly/32eQP4K
Other articles about different builds: fpvcycle.com/b...
▼Join the FB group for more discussion: FPVCycle - Kabab FPV
/ 379155946182689
The store: www.FPVCycle.com
▼ My typical 5" quad setup:
-CineGlide: bit.ly/2MCoz50
-Motor: bit.ly/2Nqqr25
-ESC: bit.ly/2oDdzvL
-WaFL’s Cap Cap: bit.ly/2GUpXxO
-Battery: bit.ly/2JnsTDM
-FC: bit.ly/2XRc8G8
-FPV Cam: bit.ly/2Q7LfL7
-Vtx: bit.ly/38Y25oz
-ND GoPro Mount 30deg: bit.ly/2WC15zc
-ND Filter (if used): bit.ly/2WEmQ1j
▼Notable motors:
Check out the Rcinpower Wasp and Bison...interesting motors coming. We're working on blending those two motors into one. The Wasp is more powerful but the Bison has an awesome 11mm bearing that's uber smooth.
▼Starter goggles: bit.ly/2qbJNOS
Recommended radio as of Aug 2020: bit.ly/2PrTIti
▼ If you want to solder better:
-Fantastic solder: amzn.to/2P5QM2W
-Fantastic iron: goo.gl/DqBipa
▼ Tips?
Patreon: bit.ly/2oGLP9b
-PayPal: www.paypal.me/...
-Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ
-Nano: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f
-ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5
-LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG

[@Kabab]

Details about the Baby Tooth 1S 3" build: bit.ly/32eQP4K Other articles about different builds: fpvcycle.com/blogs/build-guides-and-discussion ▼Join the FB group for more discussion: FPVCycle - Kabab FPV facebook.com/groups/379155946182689/ The store: www.FPVCycle.com ▼ My typical 5" quad setup: -CineGlide: bit.ly/2MCoz50 -Motor: bit.ly/2Nqqr25 -ESC: bit.ly/2oDdzvL -WaFL’s Cap Cap: bit.ly/2GUpXxO -Battery: bit.ly/2JnsTDM -FC: bit.ly/2XRc8G8 -FPV Cam: bit.ly/2Q7LfL7 -Vtx: bit.ly/38Y25oz -ND GoPro Mount 30deg: bit.ly/2WC15zc -ND Filter (if used): bit.ly/2WEmQ1j ▼Notable motors: Check out the Rcinpower Wasp and Bison...interesting motors coming. We're working on blending those two motors into one. The Wasp is more powerful but the Bison has an awesome 11mm bearing that's uber smooth. ▼Starter goggles: bit.ly/2qbJNOS Recommended radio as of Aug 2020: bit.ly/2PrTIti ▼ If you want to solder better: -Fantastic solder: amzn.to/2P5QM2W -Fantastic iron: goo.gl/DqBipa ▼ Tips? Patreon: bit.ly/2oGLP9b -PayPal: www.paypal.me/kababfpv -Bitcoin: 1E4XZXoD4rS6MYWVWuenY7Kw2M1YgyNpoQ -Nano: xrb_1188ek5bd7tb9kw67asnp9o65byuoaxbtpxuznx1ribf75x78awywmakj55f -ETH: 0xD067F93811f2eC31CB1928901002dfdf9A492EF5 -LTC: La2KWYAjp4VT2Lq2M76pbjzXWvRyjpfCtG

[@Darksagan]

I know its probably simple but please make a video on the battery setup or a diagram for us noobs.

[@stinerivera2543]

Try 1s 18350 li ion.

[@Darksagan]

@@stinerivera2543 What settings do you use for charging?

[@RoosterBoosterC08]

Looks like a 4p if you know what I mean 😉

[@silverkey6179]

Hi! Do you ship this product to Poland?

[@alexanderthygr8]

This is the first time that Bob cut his motor wires to length, Congrats ! 🤣🤣🤣

[@Kabab]

I was forced to! Can't have the weight! 🙈

[@tehllama42]

Thank you for identifying this as the truly momentous occasion that it is.

[@AfafPrinceOSH]

@@Kabab bro, a new motor have been released by diatone mamba 2204 1450kv 2460kv. Hope u review it

[@minkorrh]

Now we know why we wait so long in the dentist's office. It used to be golf, now it's quads😂

[@Kabab]

😂

[@Mcrisara]

This renews my confidence that FPV won't be dead even if the FAA has their way. Fingers crossed it doesn't come to that but woah that thing boogies.

[@brandohim]

Best 1s board out there. I cannot believe the performance. And quality. Thank you.

[@explosivefruits]

I love what you’ve done to the hobby, still rocking my OG toothpick, just need a viable shipping option to Australia so I can build a tp3. Keep it up!

[@joevo2]

I think they’ll have it in tbs store soon. Should have cheaper shipping I think

[@kafie1980]

I am still wondering why the FPVCycle FC is not stocked on the TBS store. I managed to buy everything I needed for a 1s build from them. Shipping from US to Australia via DHL for an FC is an overkill.

[@joevo2]

@@kafie1980 I think kabab is working on it. More of a logistic issue rather than not putting it tbs store.

[@pickinfun6941]

I just finished my babytooth. I got almost 10 min. On my maiden, it was light cruising in the backyard, but wow was my mind blown! A lot of fun too, thank you!

[@haythamfpv]

I would go with IRC Ghost, it has a 0.6g full range receiver and it's full range antenna is about the size of the mini immortal T

[@mikej8940]

and they have an even smaller one in the works check out bardwells interview with irc

[@peterzingler6221]

Yes of course it's smaller it's 2.4ghz

[@Cre8ionz.]

Or try ExpressLRS - 0,44 g with the ceramic Antenne :P

[@georgitushev]

I LOVE IT! 1S 3" long range is the future perhaps :D

[@smooth_ops2942]

I'm shocked on the speed and agility of this little setup... Great work👍🏻

[@remainsmemories626]

About 450 1s batteries being out of stock: you can buy more S batteries and then tear them down to be 1s. This is the consuming, but can actually make it cheaper sometimes

[@Kabab]

Yep that's what I recommend in the article or use tht 600mah cells we haveb

[@remainsmemories626]

@@Kabab if I remember correctly, you've tried both 199c and ov231 cameras. Which one is better in you opinion? And would you recommend mobula6 aio board for toothpick build? You don't seem to have current sensor onboard, but do your 1s toothpicks pull more than 5a per motor?

[@Kabab]

@@remainsmemories626 same exact cam. One just fits inside the bee brain v2 and the other doesn't. No room for a current sensor but yes absolutely it is pulling more than 5A per motor.

[@caffeinecreature]

I finally have a quad inspired by this, on a 3.5-inch frame, with 13mm 6350KV motors, and with an HDZero VTX. That thing is an absolute beast, in a class of its own, and I love it so freaking much. It's got heaps of speed, heaps of power, and heaps of range for such a tiny and stealthy build.

[@Reisaka1]

This thing is an absolute masterpiece. Bravo Bob! And thank you for doing it!

[@oregonpilot]

Awesome to see where this hobby will be in a year or two, technology wise. We’ve gotten our drones so light & small but still with power 💪

[@FalconRadFPV]

Only you could design a 1s tiny quad with dive recovery that rivals a 5" quad like this baby tooth does! Awesome!

[@jonbbaca5580]

You're truly a mad scientist of the highest order! My dentist probably plays golf shittily, I wish I had a dentist like you! I won't tell you to quit your day job, but your side hustle is doing better than most people's main hustle. Keep up the geniusing!

[@jesselopezdrones4396]

I saw this on FB today. What an awesome little ripper. Very impressive for 1s

[@brettcampbell8981]

The sickest intro to a drone video hands down...!

[@sandyfordham5072]

That wee thing is banging..... I'm well impressed

[@KKTHXFPV]

i am a true believer after building and flying one myself... seriously thanks for what youve been doing Kabab! 💯

[@lynxfpv]

In the next couple months, I think I am just going to go a head an build one of Bob's toothpicks. I would love to have a craft that I can fly right as I walk out of the apartment. My SailflyX (may it rest in pieces) was my courtyard flyer, just didn't have the range nor durability. Been watching fpv cycle equipment for a hot minute now, an have been holding out on my next build( lack of work/low funds). Wife wants me to build a long range, I would like to build a small fun flyer I can take out anywhere an not draw in a lot of attention. Really good job on this video! Just like most of JB's videos, it is always worth watching your content till the very end. Thanks for doin what you do!

[@dod.fpv_]

finally some DNB :D love it KABAB

[@donphobos]

My AIO board is in Denmark today, on route to Gothenburg. I am super excited about this build, only need batteries and the received and VTX to arrive. Great video, keep up the good work! ( I am flossing my teeth :-) )

[@showdownz]

I really like what you're doing. Flying longer has a real appeal. I personally don't think every flight has to be a death defying race with full throttle cornering and max speed straights. This little quad you've put together looks like it still has plenty of punch to fly around comfortably and do some nice freestyle. Thank you for putting this video out there. It's got me thinking about different configurations on my quad. And possibly building with the components you listed on the web page (I took a cursory glance before coming back to comment). Thank you for your vid and associated information.

[@MrStorm-tp6mq]

I'm finally seeing the light, these SMOL BOIS are where its at. About to purchase some stuff from fpvcycle and build one after being blown away by your vids and the geprcphantom hd as well as betafpv xknight 3 (bigger than toothpicks i know but its my first intro). Used to only fly big quads but by going smaller the lack of stress and noise and ability to fly anywhere makes for such a fun chilled out experience as you have said before. Stoked for the future of small/lightweight fpv thanks for all the innovation and information over the years cheers buddy happy ripping!

[@remainsmemories626]

Also, try to put there one cell from bigger pack: you probably have damaged 6S lipos laying around - just get a cell from there

[@Cre8ionz.]

And mount it horizontal ?? 🧐 🤣 Vertical makes no sense :P But good idea tho

[@dawgdude6472]

I've done 1s3p with an onstage at almost 125g from about 60g with 1 battery. It's almost a cinewhoop in that configuration. I love 1s.

[@dawgdude6472]

Onstage should say instago. I'll find a recent video using it. Curious though, this video is 3 years old, where is 1s flight controller technology today, because I really love my 1s drones. Like you said, any small space becomes a fpv park. Qwad Dawg is my fpv channel. I'll post a link.

[@dawgdude6472]

Thus is an Emax Nanohawk X racer with a 3p configuration of 650mah batteries and carrying an instago360. The drone weighs about 50 grams as do the camera, the batteries bring it up to about 120 grams and if flies real heavy, but it flies... kzbin.info/www/bejne/maban4V5a5yqmLMsi=aVO6aC8Wd4J67JJ-

[@redazu911]

Setup 4" on the baby tooth frame by extending the arms with two 1s 450's in parallel and a BT2.0 connector. I cruised around like you are here and landed at 3.73v resting. Got 15mins with 900mah basically. Funny build. Figure I'd share lol. Can't imagine with 2400mah :o

[@diveflyfish]

That is an admirable run time none the less!

[@Neukom720]

The great thing about having such a big battery is that normally, depending on cell quality, 1s gets huge voltage sag when flying it hard or going punchouts, 3.0-3.3v is very typical. This big battery can have MUCH less voltage sag so in turn even though it weighs alot more it actually has quite a bit more power because it was only sagging to like 3.8-3.9v under full load full punchouts which is amazing! And the voltage was staying above 4v for normal flying which also allows the motors to have more power and more torque to make sudden changes while your flying. The extra voltage will make up for alot of the weight because of how muchore power the motors will have with all that extra voltage! Obviously an experiment but very cool!

[@Neukom720]

Obviously high quality cells can have less voltage sag even for smaller battery's, like FPV Cycles gnb 600mah 1s xt30 non-hv might only sag to around 3.5 under punchouts at the begining of the flight. Also I dunno About everyone else but I ordered like 50 xt30 connectors cause I'm diching all my ph2 connectors. The xt30 is soooooo much better I try to force myself to solder like 2-4 packs a day with xt30, cause I have alot of 1s battery's lol

[@jpsalis]

That's some impressive flight performance for such a small quad, definitely thinking about going with a toothpick for my next quad.

[@TheHelicapt]

I cant wait for all these parts to be in stock

[@Kabab]

The v2 board is looking good so it will hopefully be a few weeks

[@MadNitr0]

That first flight video... Yes yes yes!!! This is what I have wanted from the start of FPV!!!!

[@Kabab]

The video is still early. It's gonna get better

[@MadNitr0]

@@Kabab I can't wait for you to say "here it is!!! This is the one S kit to build / buy"

[@emp29]

Thank you for bringing it back to 1s

[@DornAlien123]

Well... I have been blown away by your skills

[@dronimik]

Your builts always get me excited about FPV, love it. Need to get one at one soon.

[@peppebck]

Babytooth is the best present you can make to yourself if you like drones. Fly great, doesn't break in crash and you can fly everywhere

[@MCsCreations]

Pretty impressive, Bob! Fantastic flying!!! 😃 Stay safe there! 🖖😊

[@MaxBeamer]

That board you made with Zeez is sick! 👏

[@artoffpv2438]

this is really a very impressive drone control that you have there

[@djs134]

Think I may have to order a second setup, this thing is just to amazing to only have 1

[@RCOverKill]

I like the speed, I really like the space on the board. I'm gonna have to build 1 or 2. I've found you might get close to the same flight time with 3 batteries, it's a fine line between weight and more mAh, gotta find that happy medium. Of course you know that. I've gotten 15 minutes on a 7" with 2800 mAh slow cruising.

[@Vousie]

7" is easy to get 15 mins though (I have a 7" quad).

[@KrotowX]

Yeah, this is interesting again. Raised a little nostalgia about my old 2" builds with RacerStar 8000KV and 11000KV motors. Didn't knew about mini Crossfire antennas so far. Cool, want that. Adore that flight time I see. Maybe I will dare to build something like this too for next season. BT2 connectors are a way better for whoops and other sub-2" quads indeed. Converted our 75mm Mobula7 to them. Also local RC dealer already have 1S batteries with BT2 connector.

[@ChrisParayno]

Whoa and it rips!! Awesome.

[@tizio5103]

KZbin: Now you can upload 4K! Kabab: Sweet. Lemme just upload this SD FPV video stretched to 2160p! (also, cool quad!)

[@Kabab]

LOL yep. I wish it was SD FPV video. Well, maybe the SD stands for Shit Definition :-D

[@tizio5103]

Lol @@Kabab I can't wait until the next gen of mini DJI air units that have DVR.

[@flightevolution8132]

Impressive as always. Never clicked on an upload so fast :)

[@slyplaymike1]

I love where you are taking things....thank you👍👍

[@marsmachine1156]

Break fast 😉 for champions! Nothing like a pre work rip! 👍🏻

[@woogieman02]

May need to build one of these to take kayaking. Get to an awesome spot, and throw the quad up and cruise around

[@kyzafpv2247]

this is interesting... and I am a diehard 5inch guy. I have so many old 18650 batteries laying around too

[@mooredge]

Excellent, I need to build one of these. 3" is my go to size since you can pretty much fly them anywhere. Cheers from one DMD fpv pilot to another.

[@Max_0578]

Man, you have got a good taste for music!

[@dutchfpv7010]

Wow, I'm blown away. That is unbelievable performance for a 1S. And incredible flight time. With Crossfire and Pro32 this thing has got to be over the top. You've really sold me on micros and toothpicks. Lower cost of ownership, higher durability, surprising performance, and you can turn any 20ft radius into an adventure land. And you don't terrify the neighbors like the 5" does. I'm having so much more fun than I thought I would. When you getting the BabyTooth frames back in?

[@Kabab]

Working on refining the electionics. It needs to be solid. This platform is just too fun

[@licensetodrive9930]

I hope there's plans for a UK FPVCycle store in the works! :)

[@Temporal_Flux]

I second that. Or, maybe work out a deal with UnmannedTech or HobbyRC. International shipping costs from the US just aren't viable, unfortunately.

[@Kabab]

We will be wholesalling. TBS is getting more of our stuff.

[@licensetodrive9930]

@@Kabab That's great news, I'm wondering if it would be a good idea to ask the major UK vendors if they're going to stock your cool toys, let them know there's interest because I certainly want a 'proper' toothpick build but the cost of importing from the US has put me off so far.

[@zacbarnes9075]

This is like my video of my baby tooth flying with my Insta360Go! im building another baby tooth with your board now!

[@caffeinecreature]

The looks dope, I'm thinking of doing the same build but with ELRS EP2 and a 1000mAh 2S - so that I can put an HDZero Whoop board on it with a better antenna.

[@rzfpv2823]

This is awesome. Great flying. Sick rigg 🔥🔥

[@SOLARFPV]

Insane preformance 🤯 damn bro. That thing is a little 1s monster. Verry impressive 👌👏👏👏🔥

[@ruuster83]

I made a similar build with 1102s on 3x2 props. BT2.0 connectors 300 mah=4min flight time. Its not as powerful, but its so quiet and fun to cruise

[@DrunkAncestor]

Would be really great to get a complete kit on the store ❤️

[@RcReviewsLt]

Your immortal T mini is great with 2.4gHz much better than with 868-915mHz for crossfire, so try it with 2.4 Rx'es :D

[@Kabab]

Really? Odd but great

[@terminsane]

A boost converter on the board could provide regulated voltage as the battery dips below 3v

[@Kabab]

It's got one but the batt can't dish out the Amps needed to fly anymore at too low voltage

[@moto___]

Love the video man!

[@Bruno-cb5gk]

Love this new frame, if I had the DJI system I'd buy it straight away. With a slightly different front plate design it could maybe also be used with the Tarsier V2 camera for an even lighter quad (would make the 3s setup even more enticing)

[@emielleclercq]

What about the 66 g 3s hv1100mah gnb. By just looking at weight and capacity it has 25% higher energy density. You could use 2 of it's cells and get a 2200 pack at around 42 grams. I ordered some to test with my 3 inch but it took around 2 months for banggood to ship them and they haven't arrived yet

[@tehllama42]

'Not the full discussion video' you say? Desire to know more intensifies.

[@RCDevotee]

Very cool stuff! One of the only remaining analog quads I fly is my Toothpick 3 (built exactly to your spec) but even that has seen very limited time because of my digital fleet.

[@Kabab]

Yep I'm the same. Analog for the little stuff

[@sebastianvanderwolf6500]

That looks really fun and fast

[@Fpvfreaky]

This this is amazing first time I’ve seen this build I love it. I need it 👍🏽😬

[@Cre8ionz.]

11:15 min - got 21 Amps on the GNB non HV 450 mAh (only a few cycles) with the BT2.0 connector and 20 AWG My setup: 1S 3" 43 g ?! (need to check again ) Crux3 Frame (6 g) Happymodel Diamond F4 1S D8 200 mW VTX (weight ?) (soon will solder Elrs HM Ep2 to it +0,44 g) Happymodel 1202.5 11 kkv (4,x g) BT2.0 Caddx Ant Gemfan 3018 2 Blade

[@Mstom178]

might need this one :). great for us living in cities with too many people a local parks.

[@divingfalconfpv4602]

About the Li-ion. Seen you said at the end of the video. under 3v drone just didnt have enough power for the weight

[@Kabab]

I've tried a lion too. I can only access about 60% of the battery in flight due to low voltage

[@divingfalconfpv4602]

@@Kabab well I put ur TP3 and 4" arms with a FC in my Christmas wish list. Here's hoping GF buys it lmao.. going to just use spare motors for now. I have 1206 and 1105 motors laying around in a draw. Going to water proof and be winter toy.. Going to Find canopy with insta go holder

[@TRITONFPV]

Back at our spot I see. Has it been really packed lately? I know it's been really hot period!!! 😂 I would love to test one Bob. I'll be out on the boat in a couple of weeks. Still would love to go boating and droning with ya 🤙🏻

[@mikeflightfpv2162]

Impressed? You bet! I want one now. That little sucker rips for what it is tho!

[@daich]

DVR edits FTW!

[@Dr-easy]

Thats so dope! Thank you for sharing and awesome work!!!

[@lunaticfpv17]

Hoooly that thing moves.

[@pksteffen]

Love the Babytooth!

[@therustyfareye]

Impressive work as always good Sir....🤟😎💨

[@OVERKILLFPV]

I need this in my life!!!!!

[@Kabab]

Definitely working super hard on it

[@OVERKILLFPV]

And it shows definitely ordering the 3s 450mah one. The parts and the videos will,be extremely helpful. Plus I'm looking for something quiet and stealthy. Living by a courthouse can be challenging.😁

[@gammagonad1657]

I bought, and already have the new board. I have not had time to throw it together yet. The only thing I see that is missing is a spot to solder on a little buzzer. It is SOOO easy to loose these little guys and DSHOT buzzer is pretty much worthless with these little motors. Almost lost it several times. I do have a Buzzer on the TP3, and it is a lifesaver. Second is, how are you mounting your minimortal T? It almost looks like there are little nubbins on the arm, that you heat shrink to.

[@Kabab]

Yeah there's a minor update coming. Before people would just tape to an arm.

[@dcvshambhu]

Yes ....buzzer is missing ...which is important ....

[@lrfpv5292]

Hey Kabab, IRC noted on their site that the Atto rx takes 10 x 10mm of PCB space. I am pretty sure this could be shrinked down even further (maybe...possibly...idk). Anyways, this could be your answer to the built-in receiver problem since it will add an insignificant amount of weight and will be SO much easier to fly and setup. Something to consider!

[@devakcoltrane6594]

That's insane that a 1s quad is able to go that fast and fly for that long

[@bmonden]

Could you make a follow up video about new motors and FC that have come out since this build?

[@Kabab]

Yeah I'll be getting back into it shortly

[@neilfpv]

Looks like it's fun to fly it!

[@MoeFPV]

Man I cannot express how much I love the babytooth - built one with the FAT pinch cam and immediately built 2 more with baby ratel 2 and regular pinch lol can fly them anywhere, safe, quiet, and fun. And truly a super capable micro for 1s I want to build one with an AUW of less than 50 but I really can't seem to do it. Any advice? Is this possible? Would gladly pay you for a kabob edition babytooth build 😏😏

[@Kabab]

There's many ways to save weight. Just need to be creative. I'm not a fan of the methods however because they reduce durability too. Check out shutterbug FPV. He does a lot of very low weight builds

[@runpuppyfpv5744]

That thing rips

[@jackjohnson5024]

As a plane was flying over in the video a plane was flying by in real life lmao🤣!

[@Max_0578]

Is the next video going to be another babytooth video? I would love to see more about it.

[@Kabab]

yeah working on refining the electronics and a few other details. Then I can actually release a finished product.

[@CostaFPV]

Amazing 😮 Are you able to also fly with 1s 18650? Ty

[@Kabab]

Yeah I did a while ago. It's meh

[@BatanShorts]

Fricken heck that's fast

[@djilly75]

Omg that thing rips!

[@deruhu9163]

Hello kabab woud really like to order stuff from your store but somehow the delivery to germany costs 36$ because it's send via speed delivery.. is it possible that you could implement longer Shipping Times so the costs go down. Would that be possible ?

[@Kabab]

TBS is getting our stuff little by little. already on their site

[@morgan4675]

Love the consecutive uploads just wondering what your job is? Isnt fpv your full-time job

[@Kabab]

I'm a full time dentist. I actually have two dental businesses. FPV makes Zero money yet. FPVCycle is currently heavily in the red but hopefully in a few more months that'll change. Right now I'm so busy I almost don't sleep 😔

[@morgan4675]

@@Kabab great to here it will soon be making a profit i can see why it shouldnt it has some of the best gear on. glad i can say i am supporting it

[@Plur307]

Isn't that actually a 1S4P pack? Would be curious to see how it compares in performance to a 4S 600 mAH pack of the same size and weight. Endurance multirotors like photography drones tend to go for high voltage so I have a feeling the 4S would be better. The same amount of energy is in the packs either way (same amount of lithium battery), but the higher voltage can run at lower amps.

[@mikej8940]

its a 1s only flight controller

[@gammagonad1657]

But it will blow that 1s board up!! 1s only...

[@Kabab]

Just keep watching. I show what I flies like normally. This is a 1S quad ONLY. NOT 3S. NOT 4S

[@Plur307]

@@mikej8940 right. I am saying a similar build with 4s electronics and appropriate kv motors. I understand you can't just swap between 1s and 4s. I have build a lot of quads.

[@lucasceleste4743]

Whoa that's 1s and not sped up? Crazy!

[@Kabab]

nope that's realtime

[@TheStormHelix]

I'm impressed.

[@Enderkruemel]

I get around 8-10 Minutes flighttime whith my 5" hex(also Use a runcam3s or a gopro). It has a homemade plywood frame becourse it was original a 5" quad and I buyed a extra Set of the Same Motors and Escs as replacing Parts. Becourse when i startet the Best Motors i can afford were the emaxmt2204 2300Kv and the flightcontroller was a naze32 (1.2k /1.2k max on cleanflight) In a Hex These Motors have more than enough Power and I Use a heavy 3s 2400mah lipo. I think it can Run on 4s But the Motors are ratet for 3s. I tested my old Motor whith a replaced shaft (i used some old steel axle) And it works fine, also the Motor isnt getting warm at all...

[@viestursskadins3715]

What is reason of this drone? I have normal 4s 3inch drone, with normal 20x20 30a flight stack, full size fpv camera, 400mw vtx and crossfire. that can freestyle, race almost as 5inch and have fligh 8-12min flight time with 850mah battery.

[@gavinvales8928]

ffs i've pressed the bell icon and i didn't get the notification for these latest videos