1st Gen Toyota Tundra Prinsu Access Cab Install

This Toyota Tundra is getting the tools it needs to be the ultimate Prinsu life vehicle.
Toyota Tundra Prinsu Access Cab Rack: prinsu.com/pro...
Instagram @CBI Offroad Fab
Facebook CBIOffroadFab
Prinsu Instagram @Prinsu Design Studio
Prinsu Facebook prinsudesignstudio
CBI Offroad fab: cbioffroadfab.com
Prinsu Design Studio: prinsudesignst...
#cbiequipped​​ #thatprinsulife​​ #overland

[@CanadianPrepper]

I like the part where they dont show it installed on the truck, that was the best

[@TheAngryCamper]

OMG I literally was waiting the whole time to see the finished product!!

[@jaymassey5837]

🤯😳🤯

[@samgtr9039]

You didn’t show the full truck with the rack. that’s what I wanted to see 😔

[@joe6837]

Keep the music down, when the man is talking

[@Ojb_1959]

Uh, you forgot something. SHOW THE RACK ON THE DAMN TRUCK🙄

[@c313zk6]

4:52 starts talking *BLASTS MUSIC*

[@michaelgraham5326]

I can’t express enough how helpful this video would have been for my second gen access cab Tacoma. The directions were horrible. Maybe make a suggestion to watch this vid first for other applicable installs? Maybe a link with the directions that would save you some headaches.

[@HTodd5]

Do you have a version available for the double cab 1st gen tundra? Love the videos!

[@PrinsuRacks]

We do not yet have one for the full 4 door app.

[@jaymassey5837]

@@PrinsuRacks dang ,, we first gen dub cabers all want this!!! for real!!

[@squidog94]

I second this request!

[@PNWXOverland]

@@PrinsuRacksyou have one for the Sequoia so just shorten it up a touch.I need one and some CBI sliders.

[@Jtx_Tools]

Do you guys make one for the Crew cab I’d buy one

[@DallenPearson]

Can you do a. 5th Gen RAV4 tutorial? Mine is estimated to ship the 20th.

[@jesusflores3354]

The reason they didn’t show it, because it’s a 1st gen DC Tundra!!!

[@wayned3137]

I don’t like those nuts, they’re just not secure enough and the you tighten them all by feelings it’s just not right.

[@ProdigalSuns]

I feel the same..

[@jaywilliams415]

FREE TIP...have a tissue or a rag over the end of your magnet to make it way easier to clean the metal shavings!

[@PrinsuRacks]

That's a great tip, thanks!

[@PNWXOverland]

Make a 4 door version!!!

[@trooper11c]

Let's see a pic of the final install!

[@davidsalazar787]

Finish product??

[@khole7699]

I love how the music got louder right when you made the first drill and warned about not drilling too far in. Very important detail.

[@busbqbill449]

How long does this take to install approximately. How long does it take you to install?

[@PrinsuRacks]

With assembly of the rack you should be able to do it in a couple of hours no problem.

[@Joe-cu4hi]

Added the Prinsu on my 2017 Tundra and added two 30lbs each Trek bikes at the very edge of each side for stability and the crossbars bow, twist and creak like mad making a terrible sound. We turned the crossbar closest to wind deflector on its side for strength and its doing better but still bowing and creaking. Did review on Prinsu website but never posted. I assume they don’t want negative reviews. So if 60+ lbs bow the rack to the point it touches your roof what can you put up there? It looks great I give them that but i bought it hoping to put a kayak and both bikes like I did with my Yakama on my previous truck

[@PrinsuRacks]

Hey Joe! We frequently mount bikes on our Rav-4 with no issues. If you would like to speak to a representative, you are always welcome to email us at [e-mail]. We can take a look at your roof rack and potentially diagnose some of the problems you are experiencing.

[@jesusflores3354]

We are still waiting for DC roof rack!!!!

[@jrkeyesful]

Can you tell us what the weight capacity of the rack is? Also, to be clear, this IS for a first gen (2000-2006) Toyota Tundra Access Cab, correct? There was some back and forth in the comments that it was not for the stated truck in the video (also, I see on the website it does show you have a model for the first gen AC).

[@PrinsuRacks]

So the weight limit is about 600 LBS static weight and about 300 LBS dynamic weight.

[@TheArtOfCool]

This looks crazy hard

[@kenshepherd6831]

1st Gen Tundra?

[@PrinsuRacks]

Sorry Ken, we do not currently produce a roof rack for the 1st generation Tundra. Thank you for letting us know you would be interested in one! We are always taking votes for new products.

[@JERRYR708]

Seems that us 1st Gen Tundra owners are getting abandoned.

[@joeashbubemma]

$660 FFS.

[@victorsanchez1983]

say good bye to cleaning your roof top

[@JERRYR708]

With my roof starting to fade, now I can hide it with a roof top tent. Problem solved...:-)

[@manuel13271]

1st gen Tundra Access Cab?

[@PrinsuRacks]

Sorry, 😕 no roof rack for the 1st gen Access Cab yet.Thank you for your interest though! We are always taking votes on new products and ideas!

[@manuel13271]

@@PrinsuRacks question do you know anywhere that does and share a link if you do man I really want roof side rails for mine just like the tacomas get

[@JERRYR708]

I'm looking for my 2003 Tundra access cab also.

[@manuel13271]

@@JERRYR708 any mods to your tundra

[@JERRYR708]

@@manuel13271 All stock with 75,000 miles.

[@DEVIN2u1]

where are you located?

[@PrinsuRacks]

We are in Idaho Falls, Idaho. =)

[@DEVIN2u1]

@@PrinsuRacks can you give me a price for tundra? And also do you give military discount? Just curious.

[@speshuled619]

What silicone did you use?

[@PrinsuRacks]

Good morning, our engineer that creates and installs the racks uses VersaChem Clear Super Silicone. Thank you for reaching out!

[@busbqbill449]

@@PrinsuRacks you didn't answer the question. Which one did you use. The one you used is definatly not clear.

[@nathanwright1031]

@@busbqbill449 We use Versa Chem brand and it is called Super Clear Silicone Gasket Maker. It is in a white and green tube and works great.