1st official haul with the NEW TRAILER 😬

Join this channel to get access to perks:
/ @coolcarskj
Scoop up some MERCH here:
www.coolcarskj.com
If you'd like to support the channel, you can:
cashapp- $coolcarskj
paypal- [e-mail]
Message me on IG @ cool_cars_kj
Message me on FB:
/ korey.s.jones
OR
/ coolcarskj
Email me @ [e-mail]
Follow me:
Instagram: @10tows_down_towing
Instagram: @cool_cars_kj
TikTok: @coolcarskj

[@VATION3RD]

Load the Roll Back Ford on their backwards...

[@JeronWhite]

You ail get the job.done bro like me.keep the.good.work

[@Brattenjames17]

That white truck does it have VVT solenoids it should be one under each valve cover it controls the oil flow or it could be a fuel pump driver module underneath the rear of the truck

[@10TowsDownTowing]

I'll look into that, thanks! I'll probably take it to a local shop though

[@fritzduval]

Your killing me fella!!! Your gonna pop your transmission parking linkage. Put truck in neutral, apply parking brake and chalk one tire front and back. 👀👋

[@10TowsDownTowing]

I had wheels chocks in front of the tires, and it still rocks the truck. I might have to try that neutral trick for sure.

[@tonynimmons111]

If you get tired of dragon chains, I use rhino straps. They can handle 10,000 pounds apiece and I use them all the time. Much lighter and just easier to deal with.

[@tonynimmons111]

I forgot to mention, they give you a lifetime warranty so if any of them get free cut the ratchet has an issue you just take a picture email it to mini Amelia Brandes strap or brand new ratchet for the rest of your life

[@bigtime110]

It ain’t nothing like being able to tow your own vehicles 💪🏽🪝✌🏽

[@mronecallllc157]

Get a grease plate less messy and save on time essy

[@chriswalshtv]

Hey what’s up bro how are you much love let’s go

[@borninthefla]

Wheel chalk that truck or trailer next time. Save that transmission on that dually! 19:13

[@ramoneferdinand8247]

Good job always be safe 🙏👍

[@kelvintorrence5994]

man what happen to my big red Ford ltl9000 tractor brother

[@10TowsDownTowing]

I still have it bro! Just waiting for the right air brake trailer to fall in my lap!

[@levarbell1433]

Salute to you and your movement, I have been following you for a while. I have a 05 Chevy c5500 6.6l duramax rollback. I've been getting the run around. I'm out of 7 thousand dollars 💸. Dealing with shoty mechanics. If you can let me know the dollar amount for the hydraulic rebuild.i

[@levarbell1433]

I am in south carolina

[@10TowsDownTowing]

damn bro, that sucks! I hate to hear that. I'll let you know what the total ends up being. I appreciate you watching and supporting!

[@t.l.robinson2162]

When you are repairing your rollback it will be very smart to bite the bullet and have all of your cylinders rebuilt and all hoses replaced.

[@10TowsDownTowing]

They called me Friday. They had already rebuilt 3 of the 4 cylinders. They have to finish the one for the wheel lift. They said the hoses looked to be in good shape.

[@t.l.robinson2162]

@@10TowsDownTowing cool. One less thing to worry about later.

[@mronecallllc157]

Flip the spare tire

[@MATTEOSTOWING]

15:14 with that spare sitting on the tire and not being flush. Those nuts are most likely going to vibrate loose if the hub where the rim is supposed to sit isn’t flush either. I would just double check them every now and then so you don’t lose the spare. Also try to get yourself a set of jack stands or blocks of wood to slide under the rear of the trailer when you go to load something. This way when the weight of the vehicle starts getting onto the rear of the trailer the tongue of the trailer lifts up on the rear of the truck that the trailer is hooked to. It can pick it up high enough and might start rolling away one day. Just keep that in mind when loading heavier stuff.

[@artgov]

Why not take off the outer rear wheels for transport?

[@10TowsDownTowing]

Definitely will work in the future, if needed, but that would have been too much work just to go around the corner 😆

[@artgov]

@@10TowsDownTowing ok I understand. Nice trailer!

[@stillrumone]

#SELFsufficient... 😎💪💪💪💪💪

[@chevyDboyMike]

😂. No he didn't do the instant teleport

[@10TowsDownTowing]

Yessir. I've achieved greatness 🤣 #teleportation

[@fallenskyshomesteadingandp2528]

Hardest working man in the tow business!💯💥👍🏿

[@10TowsDownTowing]

I appreciate that, sir!

[@fritzduval]

Hey fella, you forgot to grease the king pin on the trailer. Also, take the crank handle off the trailer. Find a socket that fits, maybe have to modify it by drill a hole thru the socket and the handle end. Use your impact to raise and lower the trailer down. You can also weld it on. Makes your life alot easier. ✅️

[@jaylockdown933]

All your tow videos motivate me man , keep up the videos, love em ✊🏿

[@benl4707]

You try flipping the rim 15:04

[@t.l.robinson2162]

I am so glad that Diamond C switched the spare to under the bed. It drops down like the spare on your truck.

[@10TowsDownTowing]

Oh wow, i need to see that! Sounds cool!

[@t.l.robinson2162]

@@10TowsDownTowing it is.

[@CUBABLOCKMASONRY]

That’s the best diesel motor ever

[@megasmoothone]

Next time load the flatbed in reverse so the rear tires are not on the fenders OR take the flatbed to the front like you did and lower the wheel lift enough to raise the rear axle just a bit to take some weight off of the trailer fenders. Enjoy your videos

[@devajonesdiy]

6:38 the dog got up in there like he paying for you to transport that one😂😂😂

[@mrmilo1971]

Tuned in to some 10tows content 👊🏽👊🏽👊🏽👊🏽

[@walterwilliams2711]

Been waiting on some videos

[@ThinkBeforeYouMove643]

Hey 10 tow how can I holla at you.

[@10TowsDownTowing]

Instagram: @cool_cars_kj Instagram: @10tows_down_towing Or on Facebook: facebook.com/profile.php?id=61563614436981&mibextid=ZbWKwL

[@truckingwithbigmitch5711]

If I may ask how do you get cars to haul? I have a one car trailer

[@10TowsDownTowing]

From loadboards or direct clients, if you have any. You need a valid operating authority (DOT and/or MC numbers)

[@truckingwithbigmitch5711]

@@10TowsDownTowing what kind of insurance do I have to have?

[@MATTEOSTOWING]

I recommend just buying 2 new cylinders from zips. Rebuild your old ones and keep them as spares.

[@10TowsDownTowing]

I didn't think of that because my hydraulic shop is the absolute best in the region. They use to rebuild all the cylinders in the trash trucks at my old job. But I will go look them up on zips and see what they cost compared to whatever the bill ends up being.

[@MATTEOSTOWING]

@@10TowsDownTowing it was like $1300 - $1,600 for 2 brand new ones for my century bed. I had the same issue with one cylinder. So I did both at the same time.

[@CUBABLOCKMASONRY]

That’s a 7.3 ????

[@10TowsDownTowing]

Yessir

[@quaneshajones2303]

❤️