2.4 Transit DI VP30 Fuel Pump EDU Swap (Keeping PATS Coding)

[@Bristolchannelhunters]

Top man, exactly the advice I was looking for 🙏

[@thatroverguy1937]

This is the video I needed, thanks for posting this, I’ve been curious about swapping the EDU for a long time, now I know you can -- UPDATE I just swapped the EDU and sure enough transit fired straight up, you my man are a hero

[@Chris_CDB]

Nice one, good news

[@RaTcH3T1]

Ty....got the same issue for a customer,wasnt sure if the solenoid had to be swapped too, didnt want to cut those wires before i made sure. Top video pal...

[@inasingtr]

No you don’t have to.

[@ashleybennett1064]

Changed alot of these modules over the years it's very rare the actual pump goes rong as it's mainly mechanical

[@rocknral]

I've got a pump with ( I think) a buggered edu. I've got a good edu from another pump. Did you have to get yours coded? Or is it a straight swap.

[@Chris_CDB]

@rocknral you will need it coded, as the video suggests, however you will probably struggle to find people who can do it.

[@rotationevents]

Cheers for the video

[@Chris_CDB]

No problem at all!

[@snoozer009]

Forscan can sync the pats system.

[@unutilisateurgoogle8927]

Did the same replacement engine on mk6 duratorq 2.0diesel with vp30 , Red light flicker fast above the clock, starter cranks, it turns 5sec , diesel came out with good pressure at injectors but engine go off Thanks for this

[@jcstuningltd]

pumps not coded

[@unutilisateurgoogle8927]

@@jcstuningltdy parked it in center of a field un put it on fire... was the best option...

[@jcstuningltd]

probs best having same problem thinking of going to a ve pump

[@emmaedwards8461]

thanks will try this my husband having immobilizer problem red light flashing on stat & doors lock while trying to start hopefully your video helps did you have red flashing light before you swapped units over

[@joemason9187]

I've done this twice on me mk6 tranny I'm looking to put manual pump in it

[@ibrahimibo3979]

İ have new end used pump end ecu repaiering with 5 years warranty

[@ranat5526]

Crap pumps, many years ago you could just go to Ford's repair workshop and see all the mk4 transits with fuel pump problems. They used to come in like water!!

[@perfektrepairs7934]

I wanna buy a Mk6 2.4di transit for work runs good but all I see is pump failures lol should I not buy it?

[@Chris_CDB]

They are not all that reliable to be honest!

[@ThePatto56]

My 2.4 MK6 2005 cranks but wont start fault codes P1564 & P1664

[@charlieharper1206]

I just done this exact same thing yesterday and my van would just turn over and doesn't start

[@Chris_CDB]

Have you scanned for codes ,? Bled the fuel system?

[@charlieharper1206]

@@Chris_CDB yea I tried bleeding manual then tried bump starting with no luck it starts but won't run it's as if the fuel pressure isn't high enough had p1666 code desynchronization with crank

[@Chris_CDB]

@@charlieharper1206 sounds to me like the chain has moved/stretched… have you removed the pump at all without holding the chain with the proper tools ?

[@jcstuningltd]

@@charlieharper1206any luck with fix having same issue.