Рет қаралды 2,936
Since it took me a long time to connect 2 Behringer X32 rack mixers, I made a short tutorial with my smartphone to make it easier for others.
Here are the steps:
1. Connect both racks with a lan cable. Input "AES 50"
2. For the rack that is to serve as the master, press "Routing" and set the following for "Input": "1-8" - ´Local 1-8 ´; "7-16" - ´Local 7-16´; "17-24" - ´AES50 A1-8´; "25-32" - ´AES50 A9-16´ finished.
3. For the "slave" rack, first press "Setup" and set the clock source from "Internal" to "AES50 A".
Then press "Routing" and set "Local 1-8" in "1-8" in "AES50 A" and "Local 9-16" in column "9-16" Then it should work:)) I wish you success ! [ google translater ]
Da ich längere Zeit benötigt habe, um 2 Behringer X32-Rackmischpulte miteinander zu verbinden, habe ich mit meinem Smartphone ein kurzes Tutorial dazu gedreht, damit andere es leichter haben.
Hier die Schritte:
1. Beide Racks mit einem Lankabel verbinden. Jeweils Eingang "AES 50"
2.Beim Rack, das als Master dienen soll, auf "Routing" drücken und bei "Input" folgendes einstellen: "1-8" - ´Local 1-8 ´ ; "7-16" - ´Local 7-16´ ; "17-24" - ´AES50 A1-8´ ; "25-32" - ´AES50 A9-16´ fertig.
3. Beim "Slave"-Rack zuerst "Setup" drücken und Clock Source von "Internal" auf "AES50 A" stellen.
Anschließend "Routing" drücken und bei "AES50 A" in der Spalte "1-8" ´Local 1-8´ einstellen und in der Spalte "9-16" auf ´Local 9-16´ Dann müsste es funzen : )) Viel Erfolg !