(2)- CARB THROTTLE CABLE INSTALL EASY (end)

[@jackiesimonslll7034]

You sir are a mastermind. ' Don't tell your friends ' . Classic!!

[@DIOSpeedDemon]

Thank you for the Kind Words, Randy H, DSD

[@ericdoran4313]

You have the only video that simply shows what to do. Thank you. I was trying to pull the throttle before reassembly and I didn't see it move . I said this ain't gonna work, screwed it together and it worked! Thank man lol

[@DIOSpeedDemon]

Glad to help, there are like 3200 more videos on moped problems and they are free.

[@shannonfindlay244]

This is just what I needed this evening while working on my Beta trials bike. thank you!

[@Mrmicpolock]

At 26 seconds when the throttle cable slid back and I heard you sigh and say damn it I chuckled. brother we've all been there. Great video

[@DIOSpeedDemon]

In my sixties now and Arthritis in the hands in not helping my Racing abilities. I am always glad when the cable locks in, what a relief...Regards

[@hheadache]

thanks to your help i ran my own throttle cable on my 02 cr 250 and saved money not taking it to my guy! THANKS \m/

[@cn9936]

Tha k you for making this video 11 years ago. It helped me today!!

[@kbradshaw880]

Thank you! I was wondering how to hook up the throttle cable and I see now it is easy to do...

[@akbarhussain1767]

Hi DIOspeeDemon,thank you so much for your time & an Excellent tuition in the top cap & cable installation for the carburetor,thank you friend 😊😊

[@DIOSpeedDemon]

Thank you for your kind words.= In my Playlists , I have very Recently Catalogued all my videos on this Subject- Check them out !! thank you.... All Free!!!

[@redordead7771]

Excellent video and great advice about telling people I know nothing about carbs

[@gotahaveaGSD]

Because of your video, I got my nephews pw50 running today. Thank you so much. I got a lot of "the good uncle" points today. (The bike was running at full throttle due to the cable not sitting right in the carb. as described in your video.)

[@DIOSpeedDemon]

Glad to have Helped and it did not cost you One Dime. RH

[@crazeyse8]

hey man thanks for this tutorial, i got my aprilia rs125 yesterday and the throttle snapped, off to the store right now to get a replacement throttle and to install a new one today!

[@BewandTheBark]

Thanks my guy...after you used those hemos I said darn, I don't have any and I pulled it off bare fingered(while fish fingered) and I got it! I gotta get some hemostats.......thanks again. My first puk carb install!!

[@DIOSpeedDemon]

Glad I could help

[@AlexGiacoman1]

thanks again for breaking it down barney style answers all my questions great video man

[@cglamboy]

I enjoy very much your instructional video, I will like to know if you have one video on how to replace the throttle Cale on a VTX1800R. My Calble is not creating tension at the Throttle Handle and appear to either be loose or broken. Thank You.

[@S2king-custom]

Hi, I have a question on the Carb that has the trumpet air filter .... Does that trumpet comes with foam filter inside ? If it doesn't , how does that prevent the water and all the dirt on the road goes into the the carb ?

[@number1otakugamerotakuclan17]

thank you ma'am your video actually help to me was a really complicated part of my engine if I would have left it the way that it was it would have been in Full Throttle when I kick started the brand new engine this taught me how to properly insert it because mine was a round piece

[@DIOSpeedDemon]

I have a Really Low Voice for a Ma'am.... Glad to have helped bro. RH DSD

[@willsummers1245]

I bought a bike that's been setting for 19 years cleaning out the carb this help thanks

[@darylwright2946]

Can you point me in the right direction for what hoses hook up to what? I have almost the exact same carb on my snow mobile and i'm having a heck of a time finding a manual.

[@DIOSpeedDemon]

Daryl Wright I don't no anything about snow biles.

[@ivaspectiv1848]

Big time help, thank you, so I thought I had the wrong cable or something, but it looks like I did something wrong. I appreciate this video so much

[@dreamwrld8498]

I went in the KZbin app just to like and say I really appreciate the help!!

[@DIOSpeedDemon]

Thank you. I have over 3000 bike videos or bike helping videos. Please check my Playlists. They are all helpful and all Free. Thanks for the kind words. RH

[@pauljukes]

Excellent vid and a few funnies thrown in !!!

[@eskildaagaard639]

Thanks for the video. You were telling why you can adjust the wire 3 places but then you stop and do something else. What is the reason you can adjust 3 places ?

[@DIOSpeedDemon]

There is an adjustment at the throttle grip, half way down the cable and at the Carb slide position. All cables have the same configuration.

[@danielmulk3026]

That was funny I looked away for one second and he said look lol awesome video keep uploading

[@danielmulk3026]

1:00

[@DIOSpeedDemon]

Glad you enjoyed, It is what it is since all of my video are only shot once and no editing- I never learned to edit vids.

[@josephsmith7225]

Omg just wanted to figure out how to do it and you had me laughing throughout the whole video😂

[@lukethekanefan]

my friend has a mini moto and the throttle cabble goes into a plastic holder where yourse in the video is metal but were the needle is the needle is free to be ushed up on its own without the cable pulling it up in the carb i dont think that would matter becouse doubt it wuld get pushed up by the fuel without it been operated by the cable but im not too sure

[@ripperface7414]

Exactly what I needed to know!!! I have the wrong throttle cable....lol

[@michellerouse9031]

Omg just wat i needed to finish m daughters 4 wheeler!! Thank you!!

[@DIOSpeedDemon]

Glad to have helped. I have 3500 videos on all aspects of scooter tuning all free, thanks RH DSD

[@kobiisrael10]

I have a problem with my KTM 250 2T The tool has not been used for almost a year This week I found time to take care of it, I did a fuel-oil change, I cleaned the filter plug, everything, finally I tried to start it, but the car could not start. It only started with carburetor spray and shut off straight away From that I understood that the carburetor needed to be cleaned and that's how I did it. Now the problem is different, the motorcycle drives straight up to very, very high turns I played with the air-fuel screw but unfortunately it didn't help. Is there a situation where the problem is different? Something in the carburetor maybe? need help pleases tool,

[@sd835]

Thanks man I just got a 2001 cr 125 and wanted to check my needle position but could figure out how to disconnect the throstle cable and your video helped

[@DIOSpeedDemon]

@Purugati Glad to have helped and I have hundreds of other moped helpful videos on all subjects of the mopeds. RH DSD

[@welshsteak]

champion proper video made by a proper geezer

[@jaguarsilikon]

You sounds like Vin diesel man! Thx for helping me. Could not make it alone without you're video :D

[@DIOSpeedDemon]

Vin Diesel has actually the most perfect voice for doing commentarys , like on these videos. No one ever said I sounded like him before and that is a great compliment to me. A lot of people comment that I sound like Jeff Bridges, another great actor. I would love to sound like Vin in all my videos. Glad to have helped and I have hundreds of more help videos on all phases of scooter problems. Randy H DSD

[@WestHaddnin]

Lmao end of the video had me bustin up. Lips are sealed on the talents 😂

[@Nekroman111]

I bought a mojave 250 and had a bad keihin cvk34 carb so i just bought a new oko 34mm and was in shock because i didnt see a throttle linkage you know, um trigger, but this vid makes it look simple. I will try tomorrow because the stock throttle cable doesnt fit through, the lead weight at the tip of the cable is too big. Ill look for a universal cable and hope that works before i return the oko. Thanks for the detailed instructions

[@shelbybounds3521]

Do you have a video on installing the throttle cable on the handle bar end? 2004 Honda 250 recon

[@DIOSpeedDemon]

+Shelby Bounds No, I don't think I have any of those, sorry.

[@Palooza008]

Thanks DIOSpeedDemon, I have the same carb on a 2007 KTM 85 dirtbike. Somehow the throttle cable keeps popping off. It's easy to reinstall without taking the carb off, as you show, but it only lasts about 5 minutes of riding, if we're lucky. To me, that means the plastic cover is sliding up when there is slack on the cable. I think that can only happen if the needle is not going into the jet. Any ideas what is going on here? I notice the needle has a plastic coating need the top and it can "catch", i.e. it doesn't slide smoothly up and down the jet. Can you help??

[@ByIntros]

5 years later Did you ever figure it out lol

[@daveshroomer2792]

what is the length of exposed cable from cap on carb to needle valve attachment ?

[@Morcego538]

thanks for the explanation real good explanation. the carb that you are using in this video its a flatslide carb?

[@dimsalabim]

Great video! Thanks! What Keihin carb is that btw? My bike has a Keihin ptg 7...

[@DIOSpeedDemon]

Dimitri Van Dijck It is a Keihin/ Sudco pwk 28mm racing carb and it cost me a few Ducats but damn well worth it. I really like it.

[@dimsalabim]

What bike do you use it on? I have a skyteam 125 sm... 38mm air intake carb. I've just installed a new carb thanks to your video :) with new jets ... got a bit more horsepower now. Nice

[@JAMTOAM]

I have problems find out witch carb I have on my 125ke 1978 Kawasaki and also could take the throttle cable a choke cable to get the dam thing out and I dont wanna mess it up

[@Westhelockpicker]

I need to cut some of the sheathing off so I have more cable on mine. Probably all cables for motorized bicycles

[@jamesconant1041]

this guy is hilarious!

[@DIOSpeedDemon]

James Conant Thank you, every one needs a little laughter in todays hard world we live in. RIK

[@125baby.]

cmon man im on camera..never working on you again sheesh!! lol

[@DIOSpeedDemon]

thank you , i really like making them.

[@creativecustoms3778]

If you leave that spring in there kinded off to the side you won't have all the pull on the throttle cable as the spring will bunch up as it pushes out to the side instead of compressing. You need to hold the slide all the way up as you put the top on to make sure the spring compresses straight that way when assembled and you turn the throttle the slide will travel all the way to the top of the carb instead of binding on the spring with it pushed off to the side like it did when you let the slide sit in the bottom of the carb while mashing the top on.

[@DIOSpeedDemon]

The carb is a flat-side "D" valve carby. THey are more efficient than a round slide at air velocity. I have dozens or even hundreds of other carb how-to videos on my playlists, check them out and thanks for watching.

[@davclark6757]

How do I take the cap thing off of the throttle needle to put a new one on? My carb looks a bit different than the one you’re showing, it’s a screw on cap thing to the carb. (I’m dumb so forgive me lol)

[@danielr9245]

Great simple short and to the point … I like it

[@samstocks4562]

Quick question. I have a 2003 kx 125 that I recently purchased a Keihin pwk 38mm carb for but not sure how to hook up the factory throttle cable any tips?

[@cn9936]

I’m installing this carb on my 171cc go kart and the cables are too short so a rod system has to be used. I spoke with Barnett Cables and they will make a long one for me. So you remember where you got that cable and how long it was? Thanks

[@Tizzy_p]

Hi buddy I’ve got a Yamaha neos 50 stock I have a 70 race version too my issue with my stock bike is my throttle won’t spring back it won’t open it won’t shut if I undo it off the bars and slide it out abit it actually works a little bit but not much any suggestions I have now is it’s shutting and opening the slide but it’s a very short action like quick action I’m thinking the domino throttle on it is a quick action but it’s very tight? Any ideas I’ll appreciate my 70 throttle doesn’t fit as I have a bar conversion and it’s a aerox style with the hand switches on it but the stock is just the throttle housing?

[@DIOSpeedDemon]

I would suggest you break down the throttle housing on the right grip and take the pieces and clean them real good . Take WD-40 and start at one end of the throttle cable, and use the oil to clean the cable really good. Rebuild the carb by unscrewing the top, removing the slide and needle valve. Take the carb off the bike and take it apart, use a video cam or phone pictures to take pictures on how the carb was taken apart piece by piece to put it back together right. Clean the main jet and the idle jet with a very fine thin wire, electric guitar wire is best. Clean out all gunk in the bottom of the carb and get some carb cleaner with the long red hose and blow out all the little holes and orifices in the carb. Better yet, take the carb apart and clean it and let it sit in a pail of gasoline or petrol over night. It is real easy to do and after you have done this once, you will be able to clean bike carbs upside down with one hand. Note- when using the carb cleaner with the jet hose, ALWAYS WEAR GLASSES. cleaning out carb orifices has a nasty way of shooting the carb cleaner directly back at you and in your eyes. Been there/done that. Benzine burns when it gets on the skin. Clean everything up, re lube the carb cable and Throttle assembly on your handle bars and put it all back together. IF your carb cable is damaged, a new one can be had for like 10$ anywhere. hope it helps, RH DSD KING DIO.

[@Sms68]

I am curious if you can put a copper fuel line on these small Dirt Bikes. Just for a mod and something different.

[@DIOSpeedDemon]

THANKS BRIAN, EVERYONE NEEDS TO GOOD LAUGH.

[@nastysoda9212]

great way to shred your throttle cable, ty

[@fuckkungenshoror]

Hey DIOSpeedDemon ,, u sure helped me alot this time man own u big time!!!!!! thanks man fixed my dirtbike (susuki rm) thanks to you!!! please bro keep it up!

[@Splitshot1]

great video, the commentary had me rollin,lmao.

[@Jobrak83]

Thank you sir. Great video, love your comments. Made me laugh.

[@DIOSpeedDemon]

Sometimes I even surprise myself and laugh while watching it again after months or years of making the vid. thank you. RH DSD

[@qapter]

your description is the best.

[@mark-qd7gr]

Hey I have the same carburator, what throttle cable do I get that fits that carburator and what throttle casing goes with it so that my Kx 100 is stout once again? Thank you Boston in it💪

[@DIOSpeedDemon]

Generally all throttle cables are generic and the same. Throttle housings are different.

[@DIOSpeedDemon]

YOU WOULD NOT BELIEVE HOW MANY PEOPLE HAVE ASKED ME TO DO THAT. I live in an area with very few mopeds and fell into this moped building and video making, completely by accident, with no prior training. A lucky accident, if you will. I do a little work for select women, as they have no idea how the bikes work. Maybe I will open a shop one day. Thanks.

[@ricebrnr22]

need your help! the screw pictured on top (side) of the carb that is going out at an angle near the place where the fuel goes in, what is that and how do i return it to the "factory" setting? i have the same exact carb but it was disassembled and after swapping the oem carb to that one i haven't been able to get the bike to run ) or even idle) correctly. i've been bothering all the local shops and searching the internet far and wide. but it's hard to find information when you don't know what the thing you're looking for is called.

[@DIOSpeedDemon]

If the screw is large and has a spring on it, it is the carb slide adjustment height. It basically controls the Idle. The higher the slide in the carb, the more air and gas go thru, the idle goes up. Unscrew the screw and take it out. take the top off the carb and pull the slide out. Screw the screw in until it is barely in the slide housing and you are at factory settings.

[@ricebrnr22]

appreciate it

[@hellraiserrec19]

This was very helpful, thank you!

[@vanalstyne9834]

What happens when you can't move the white plastic piece attached to the spring? I mean at all. It might as well be welded inside the valve. You hinted at how frustrating this could be. I haven't been this pissed in years. I mean truly angry. I'm tempted to cut the cable and spring. Any ideas?

[@DIOSpeedDemon]

Use a set of forceps to hold the spring while you take off the cable end in the carb. RH DSD

[@BewandTheBark]

I tell you what I said to myself how the heck do you get this throttle cable in here I was fafitting in with it and fiddling with it so I said KZbin. How do you get a throttle cable in A PWK Carburetor...... And then I meet you in the right moment. The right time I swear you were live...like it was meant for me and I don't know. It was awesome thanks for. Explaining is so detailed like you. Did, man, you're awesome. Talk text put to bunch of comments and dots where don't belong, talk text and take a lesson off you.

[@DIOSpeedDemon]

Glad to have helped, there are over 3500 scooter vid helping on my channel, all free

[@rayheatley5285]

Great vid, I wanna see more.

[@DIOSpeedDemon]

This video was made 9 years ago. I have over 3000 videos on my channel that deal with scooter moped problems and add ons and PERFORMANCE. Thanks for watching, RH DSD

[@ser7ser7i]

I have a bmw r26 with a bing carburator installed and the carb leaks gasoline and doesnt get the air properly, what i wonder is repairing, fixing a carburator is always possible or sometimes carbs dies?

[@1canyonguy]

I could not find any video,pictures or step by step directions to do this on a 1998 KLX 300. I also tried all the forums I could find.- Any help appreciated..

[@DIOSpeedDemon]

I have 3500 vids on this channel. Search my playlists or put like diospeeddemon carbs in the search box. I am sure you will find something that will help. Thanks for watching. Most single bike carbs are the same, only multiple carbs are set up a little different.

[@1canyonguy]

I have been there and dont see it. [e-mail]

[@alwaysbroketv]

Once I put my carb back together my bike revs all the way out when I start it, how to I adjust it? I swear the cables are adjusted to the right tension and the gate type thing in the carb closes all the way.

[@garrettjost133]

I have a 96 rm 125 and when I go to put it back in it looses tension. When I have it all connected and turn the throttle the throttle will turn just about a quarter of a turn but my carb will open all the way

[@MrCurletti]

Great vid. very funny too. I really hope no one asks you to paint a carb. lol

[@DIOSpeedDemon]

Paint one, no. What I would like to do as a challenge, is to take the bare carb body and polish it like a jewel to see if I could do it with all the curves and deep divots and what a challenge! I have many more videos on my Recently Updated Channel Playlists, check em out! Thank you. DSD

[@MyPeacock1]

Would you happen to have the dimensions on those top 2 screws for Mikuni, I have one stripped needs replacement..and thanks for the clamp tip! (:

[@DIOSpeedDemon]

Take your screws to a home depot and use their screw gauge to determine the length and thread no.

[@MyPeacock1]

DIOSpeedDemon sure will do thanks.

[@syla-sybin]

im going from a standard scooter (gilera runner 125sp) carb to a 28mm del'orto....if i swap it...i will have a few pipes,cables etc going spare....kinda worried about fiddling round with it.......

[@CrazySexyMofo]

Hey i have a new Sudco 38mm kit that im putting on my harley but the top unscrews is it the same inside as this one? Thanks-Trenton

[@alexanderchristoffersen7496]

My bike starts on with wide open throttle and If I do the same things you explained in the video will it fix my problem?

[@DIOSpeedDemon]

Honestly, I do not know. You need to look at my carb cleaning videos and school yourself on how a bike carb works. They are really simple and easy with like 20 million carbs out there. Study the carb videos from me and others, see if any of them fit your problem and decide for yourself. Sounds like a dirty carb slide and/or a dirty stuck carb cable or throttle housing. I would start by cleaning all three of these items first. This is a very common problem with carbs that sit over the winter or have not been used in six months. The Gas evaporates and leaves this sticky guck that looks and feels like pancake syrup. Will it work??? I have no idea, honestly. Do some research and get back to me on what happens. I believe in you. DSD KING DIO

[@relaxingandcalmsoundsofnat4654]

Its winter now and I got this problem when it became frezzing outside and we found out of the problem. The cable was really messed up and the needle was stuck inside the carb so we are going to oil all of that up so its ready again

[@tylerfarris8862]

I just bought a 150cc ssr dirtbike and I put a new carb in the same one as yours and I need that throttle cable where could I get that at,

[@DIOSpeedDemon]

Check my parts suppliers in my description under the video and contact them for great parts! In my Playlists , I have very Recently Catalogued all my videos on this Subject- Check them out !! thank you.... All Free!!!

[@ByIntros]

Thank you.. my 2008 KTM 85 shit itself this morning and my throttle randomly got stuck.. I shut it off, rolled it to the garage and I unscrewed the gold part off the top of my carb and the cable was fucking shredded🤣 probably the same stock one from 2008

[@ByIntros]

A replacement cable is on the way… I will be using your video to help me install it. Does the carburetor have to come off the bike?

[@DIOSpeedDemon]

Glad to have helped. I have over 3000 other videos on all aspects of the little bikes, check my playlists. I know that is alot of vids, but i have been making them since KZbin started in 2006. Thanks for the kind words, Randy H , DSD

[@ByIntros]

@@DIOSpeedDemon thank you, God Bless💗🕊

[@dirtbike4life420]

Nice vid. Thanks for the help!

[@pyranaman83]

im french guys.. thanks man.. merci

[@kevinray3240]

Very nicely done, thanks for the wisdom to claim ignorance.

[@DIOSpeedDemon]

I just want to Help and the Advice is Free, You cannot beat that price. I really need to make more videos as it warms up and racing season starts here. My bike is not running and I am Depressed. I wish I had more Racing Bike enthusiasts around where I live. Thanks for the Kind Words, RH DSD

[@cancer_stixx]

Im doing the same thing on my cheap little Chinese pitbike, the carb is a little different, but everything is essentially working the same way. However when i compress the spring and out the top of the carb back on, there is no throttle tension and it just flicks back and forth because the spring is already compressed inside the carb and theres not enough space for it to open up and move. Do I just have to adjust the cable tension or am I doing something else wrong? Help would be so very much appreciated c: cheers man

[@DIOSpeedDemon]

Footinbrick88 Chinese carbs can be tricky. Try adjusting the carb cable in three places= at the carb, halfway to the throttle and at the throttle. You may have too big a spring on the carb slide also.

[@andrewmorris3197]

DIOSpeedDemon Hey man hoping you can help me here. I put a new throttle cable on my 1985 Honda ATC 200 S 3-wheeler yesterday and I'm experiencing the same problem as this person. The cable isn't tight as it should be as there is about half an inch of play in the thumb throttle before it grabs tension. I can't for the life of me figure out how to adjust that and was hoping you might know?

[@RazofSD]

Thanks finally got this weird ass motor together

[@DIOSpeedDemon]

I have Hundreds of more INteresting Videos on This and other Subjects on my Updated Playlists, Please watch. Thank You.

[@michelmullaney3641]

So listen I need a little help bro… I got a pwk 21mm and I need it to fit the 13mm 80cc port with a boot..anyone know what I can get to make this happen or work?

[@Bighormiga]

The little white part what is it called mine broke and im Not sure how to replace it

[@n3us3ns3printmynamehere2]

I don't have the little white plastic piece, do you think that it wouldn't start because of this? thanks.

[@n3us3ns3printmynamehere2]

and whats it called?

[@DIOSpeedDemon]

no

[@JonathanAshworth50]

Is this the same set up for a 2 stroke ezgo golf cart?

[@DIOSpeedDemon]

Of course it is.

[@kymmedia2]

were dose that bottome line attach too ?

[@Tacbi0325]

Hey bro my return spring in my Suzuki boulevard 07 ... I have to buy all trottle or just buy the spring?? Please helpme ...

[@DIOSpeedDemon]

Check Bike Bandit .com to see if they have just the spring to buy for your model, thanks

[@kmatt999]

This helped me so much thank you! Also your pretty damn funny

[@lextim8344]

what is the use on the air inlet on top of the carb?

[@DIOSpeedDemon]

Vacuum nipple for vacuum actuated fuel tank valve, standard on all mopeds for safety reasons. Of course mine is slightly disabled for more fuel flow.

[@craigw740]

hey i need the gold part on the top of the carb right? its for 2006 rm 85

[@DIOSpeedDemon]

Check Out BikeBandit.com for all Suzuki stock parts. My Channel Playlists have been recently Updated to show this video and many more on the same subject. Thanks!

[@matijaekart9997]

Thanks man I almost lost my shit doing this. I gave a like also

[@DIOSpeedDemon]

Thank you for the kind words. It means a lot to me. I also have over 3000 other videos with helpful bike info in them. Thanks again. RandyH DSD

[@lurvishramful6238]

Hello which cable it it and it mount which carb? it is for outboard engined suzuki DF 15?

[@jordanswabey]

my peugeot speedfight 2, my scooter is leaking petrol from the breather pipe, ive got to keep it on full revs all the time else it will cut out. i need help.

[@mpasel4756]

Nice video. Im planning on swapping the stock carb(mikuni) to a keihin pwk airstryker on my 07 cr250r.

[@DIOSpeedDemon]

Keihin are great carbs, just beware that some carbs have reversed knobs that my be on the inside closest to the tire and hard to adjust.

[@abarney1547]

Just feels good to get it all out

[@DIOSpeedDemon]

I have PlayLists on my Main Channel Page with Many Many Videos on This Subject. All for Free. Thanks.

[@lsmxboyz]

Would you recommend taking the carb off?

[@ironhead320]

do you have video on cable ajustment

[@DIOSpeedDemon]

pete Stockbauer No I do not at this time.

[@daffyboy802]

See, i have a 75° neck at the top of my carb, i cant seem to get the cable thru. Any help? Ive tried forcing it

[@DIOSpeedDemon]

My friend that is a problem i have had. Sometimes the lead end of the cable is too large to go thrue the stretched end of the curved tube. Cable makers dont think about this. Let me give you some advice that may or May Not work. First determine how much of the lead end you need from the cable to fit in the carb. Next- Carefully and very CAREFULLY, use a small metal file and try filing the lead end of the cable to go thru the 75 degree bend. IT WILL WORK, if you are careful. Once the lead end goes thru the curve , the cable will have plenty of room to work in the bend. I hope this helps. IF you take too much off the lead end , you ruin the cable. Usually only a little bit of rounding of the cable end will let it go thru. Good luck and remember it is a Gamble. I have done it before many times, and i have faith in you. RH DSD RANDY

[@DIOSpeedDemon]

Are you a farmer? I also Farm Wheat. RH DSD

[@daffyboy802]

Hi, ah thank You, No, it's a race quad

[@memphistiger4647]

Will this work similar to the small pz19 carbs on those little chinese atv's? 125cc

[@pinkflames4206]

Can I use those throttle cables on my keeway hurricane ? It has the minarelli horizontal(1e40qmb) another great vid. 1:43 you got great humor 🙂

[@kylegeldmaker]

Would anyone happen to know where I can find the ferrules & ends to make my own cable? I have a new VM38 for my Ironhead and the cables I have don't have the 48-2 end.