Top 5 Most Common Carburetor Problems & How To Fix Them

Fuel and Air Intake Systems: rmatvmc.link/top-5-carb-problems
Although carburetors work great most of them time, it can be a major headache for any machine owner to try and diagnose when they do experience fuel related issues. This video provides a comprehensive guide to the top five most common carburetor issues and offers effective solutions on how to fix them. Whether it's a clogged jet, a faulty float, or worn out components, this guide will help you troubleshoot and resolve these problems, ensuring optimal performance and smooth operation of your motorcycle, ATV, or UTV. In this video, Charles gives his top 5 tips to diagnose the most common carburetor issues and how you can fix them to get your machine back up and running.
Check out www.rockymountainatvmc.com/?u... for all your parts, apparel, and accessories!
Click Here To Subscribe To Our Channel!
/ @rmatvmc
Follow Rocky Mountain ATV/MC On Social Media!
FACEBOOK: rmatvmc?utm_...
INSTAGRAM: rmatvmc?ut...
TWITTER: RMatvmc?...
Chapters:
0:00 - Intro
0:40 - Clogged Pilot Jet
1:33 - Leaking Fuel/Sticky Float
2:46 - Fuel Flow
3:52 - Blaming Jetting for Problems
4:40 - Diaphragms & Rubber Parts

[@OogleTheGreat]

Use non-ethanol gasoline and most of these issues will disappear. I had these problems multiple times, and once I switched to non-ethanol gas, they stopped. Not a single issue in the last 5 years. I know, the Owner's Manual says that up to 10% ethanol fuel is OK to use. It is really up to you. You can save money on the type of gas, and spend your time removing-cleaning-reinstalling the carburetor on a regular basis. Or spend a few dollars more and spend your time riding. And "No", 93 octane does not fix the problem. The jets in these carburetors are small and gum-up quite easily with the ethanol gas. It took me about 5 carburetor cleanings to discover this issue. I prefer to spend an extra $1/gal for non-ethanol fuel instead of spending my time wrenching on the machine.

[@ME-wq8lq]

Is it ok to leave non ethanol fuel in the tank for long periods of time?

[@OogleTheGreat]

@@ME-wq8lq Define "long period of time." I would not leave any type of fuel in the tank longer than 6 months. If I plan on leaving gas in the tank for more than 2 months, I always add a stabilizer. My favorite is Startron. I have used Startron in my outboard, chainsaw, motorcycle, tractor, weed-eater, generator, and my Ram 1500.

[@ToridoodlesAnderson]

Hi

[@kcomst]

Great video that covers all the common issues. I've been working on carbs for the past 50 years and only in the last 5 (because of the wealth of info on the Internet) have I finally understood how they work. Prior to that, no matter what the issue I bought a rebuild kit and completely cleaned and rebuilt the carb, a waste of time when 9 times out of 10 it's just the pilot jet is clogged. Love the point he made on jetting, which often gets blamed by people who don't understand. That is another whole topic that could take twice as long. One thing I would add for proper fuel delivery is to make sure your air cleaner is not dirty.

[@rmatvmc]

Good stuff! Thanks for checking out the video and adding your input.

[@scottyboy7462]

yup- every carb issue ive had was in that top 5. excellent vid bro!

[@rmatvmc]

Thanks! 👍

[@spartan0722]

Charles, you are the man. I am going to learn how to be a master mechanic just by watching you perform your magic on the big screen, (my 27" computer monitor).

[@rmatvmc]

You are the man! Thanks for watching.

[@jtpimm4603]

One more common thing to add... If you have a brass float with solder joints, check to make sure the floats aren't filled with fuel. If the floats have even the smallest pin hole, they will fill with fuel and sink, opening the needle valve, causing carb overflow.

[@bobbyblenio4571]

Good Call ! I Never thought of That !

[@colindoyle6149]

WELL!!!!!!!! Thank you so much for this video! I've been hunting videos on bogging issues with my CRF450X supermoto before i pulled the carb..... thinking E10 fuel ate up the rubbers (not ruling it out just yet) but going step by step i figured out thanks to you I've a shitty flow coming from my tank! so fingers crossed its not the dreaded... bike strip down, carb out and rebuild!! even all local bike garages refused to take it in as they're so busy and its so time consuming so would have cost a fortune!! all happened for good reason i guess! thanks again!! I've liked and subscribed 👍

[@rmatvmc]

Glad you got it figured out and saved some money over taking it to a shop. Thanks for checking out the video!

[@JoshSinnott97]

Im looking at buying a new drz400e in Australia. This will be my first bike. I like the idea I can work on it myself to learn and fix when im away camping. What would you say is the shortest length of time when the bike is not in use that you'd want to be draining the carb? Is it a matter of weeks or is this only relevant up to the 6 month mark? Great video btw 🙂

[@cbob1]

Very good video but would be nice to see the KTM-Mikuni jet block issue addressed.

[@richardchang9740]

I swear Rocky Mountain knows what my probs are, have a klx250 , rough idle, checked everything, now have to check spark plugs... thx thx

[@rmatvmc]

You're welcome! We're here for you ✊

[@anthonyoddo8072]

What jetting do you recommend for 2023 kx85, got it brand new from the delaer with a 135 main and 40 piolt air screw 1 1/2 turns out and the bike has a hanging ilde that takes sometime to come down after reving and has a bog off the bottom

[@marshallkaufman3123]

idk but a kx80 runs a 45 pilot and a 155 main from stock

[@Techumsa]

I've changed the exhaust pipe from a stock pipe to a free flow (I added my own baffle) but idling became very erratic, any clues as to why? It's a Suzuki GZ 125

[@ode4492]

Any chance you could make an advanced, “part 2” video? The problem many of us have is not being able to understand a rich or lean condition by sound and with the bike running through its throttle range. For instance, I commonly mistake a too-rich condition as being lean and end up jetting the wrong direction and make it more rich. There’s simply not a lot of GOOD videos that cover this real well. I feel like you guys could nail it.

[@rmatvmc]

You make some good points. No promise, but we might do a jetting video with those examples. I have a few examples recorded on a two stroke and once you know the sounds, it's hard not to notice them. Stay tuned!! -Charles

[@bryan_trades8867]

Good informative video , i recently just pulled my carb for cleaning just took off the bottom bowl and cleaned out the main jet now when i start it up it revvs almost full throttle any ideas what it could be? Throttle seems to be good and not stuck

[@rmatvmc]

What machine? Could the cable be caught on something from turning the carb sideways? Sometimes if the cable was pulled tight, the housing can get pulled above the adjuster on top of the cap. FCR Carbs have that O-ring on the slide that can swell if it get's cleaner on it, (if you didn't remove the jet to spray it). Other than that, you might just need to go back through and check your work. -Charles

[@bryan_trades8867]

@@rmatvmcthanks for the reply! It is a 2001 honda 400ex

[@bryan_trades8867]

@@rmatvmc i couldnt fully remove the throttle cable since one of the cover screws was strippped so i just left it on while i worked on the carb could that have caused an issue? And it looks like the last owner removed the idle screw adjuster just ordered one. But the bike was running perfect right before i took off the bowl to check if my float was stuck since it was leaking a lot of gas from the overflow hose. I also took off the main jet to make sure it was clean

[@RocksNRuts4]

how bout a quad that stars n idels fine, but bogs or stall when i hit the throttle? #3? someone said a bad battery can cause that....

[@SlimThug78]

I have a 93 yz250 that I've been building for woods racing. Would it be okay to turn the fuel off at the petcock and let it die before I store it? I've been learning everything as I go on this bike so I'm not sure if there's any risk to that.

[@rmatvmc]

Since the gas and oil are mixed on a 2 stroke, if you turn the fuel off and let it run dry you're also starving it of lubrication. You're better off draining the float bowl or using a quality fuel stabilizer.

[@sg4682]

My Water buffalo Suzuki GT750 2 stroke (trip) with std Mikuni (CV) carbs. I'm seeing what looks like 2 stroke oil leaking from the overflow pipes (all three) even when the bike is not running. The bike starts easily and pulls like a freight train though. Why does it leak so much oil out these overflow pipes?

[@markdeeframpton]

What about that mid-body. Also emulsion tube with a worn spot from the needle causing 0-1/4 throttle to rob off of the main circuit.

[@RandyLayton-kg3oh]

How do i adjust a carbator on a kawiskoki fourwheeler bayou bran new

[@gotdoegotdam9184]

Hope u see this got a 2021 yfz 50 starts and runs at half throttle wide open it boggs and cuts off some fuel in the airbox what could it be???

[@InTheDirtAgain]

I have a KX250 and a Polaris ATV that both run out of fuel at higher RPMs. Super annoying to say the least. The Polaris is a brand new carb (not from China) and the KX is a fully rebuilt original from a certified tech. Thoughts?

[@siaknijustin]

Your float level could possibly be set too low or your main jet is too small.

[@frankmchale6916]

How's things,my carburettor doesn't seem to be getting the fuel to the spark plug,it won't start an even after a load of trying, the spark plug is dry,an ideas??? Much appreciate a reply. Thanks

[@rmatvmc]

The spark plug should stay dry. If it's wet that means your cylinder is getting too much fuel and that's how you foul a spark plug.

[@saveearth485]

My carburetor problem is bogging not taking fuel from main jet. butterflie needle not getting up actually..

[@andrewpena758]

Howdie! Where can i purchase a rebuild kit for 2008 YZ 250f? Please anybody, thanks

[@rmatvmc]

www.rockymountainatvmc.com/parts/dirt-bike-carburetor-accessories?v=2008-yamaha-yz250f

[@sigvicious5599]

My Arctic Cat 650 H1 idles perfectly. But it dies the instant I give it gas. I've removed the carb, disassembled, cleaned in a dip tank, reassembled. Same exact issue. It starts and idles great. Just won't accelerate. This issue started last summer after using it. Ran great one day. Ran like poo the next. I also run non-ethanol fuel.

[@gongascosta]

i have the exact same issue with a yamaha gt50, have compression tested for vacum leaks found one in the crankshaft seal, and she idles but with a bit of throttle it dies, my main suspect is the slide needle because one time i lowered the needle to the 2nd position and would accelerate up to 50% but not idle

[@rz350yam]

So, here’s a new one for me (been riding over 50 years). KTM 250 XC-W would intermittently bog when going over whoops. Rest of the ride, runs fine. The bog would happen for a moment then clear. I found a very small stone in the float bowl. Apparently over whoops it would occasionally plug the main jet, then bounce free. Hence, the momentary bog. I have no idea how it got in there, past the fuel petcock filter or the inline filter in the fuel line. Argh!

[@rmatvmc]

That's definitely odd! Glad you got it figured out.

[@dustyfarmer]

Bike won't start, fuel pouring out onto the ground, only runs with the choke on? Could be you have an AMAL carby on a vintage Triumph motorcycle and it's working as designed.

[@rmatvmc]

🤣

[@tru3sk1ll]

90% of all carb problems are caused by storing your carb "wet", always store it dry, even for a week, especially in CA with that SSSSSHITTY ethanol infused gas - turn the fuel petcock to 'off' - let the engine idle until it dies (burning out all fuel from carb) - you can also use a screwdriver to drain the bowl, whatever 'floats' your boat - buy a simple siphon pump and drain EVERY BIT OF GAS OUT of the fuel tank 99.9999% of carb problems can be avoided this way, I don't trust fuel stabilizers, and I don't trust anyone's gas supply, and you shouldn't either

[@markdeeframpton]

After draining I give the throttle a few good whacks to get the injector pump empty. ;-)

[@Enjoytheinbetween]

I use ethanol free gas, so much better on the carb.

[@rmatvmc]

Great tip! Thanks for the comment.

[@AmazingBlaze0]

Ever heard of a float that just flops up and down? I can’t get it to stay in a certain spot…

[@rmatvmc]

Your float should be able to move up and down but if the needle is not working properly it can cause issues getting the correct height. We have a great video all about setting float height that should be able to clear things up. We talk about the needle and spring at 0:51 in the video can you can watch that here: kzbin.info/www/bejne/h5yYkKqKf8eHfrM But let us know if you still can't figure out a way to set float height and think something is messed up.

[@starlinreese9206]

Get a Lectron 😛

[@jeffharbison6689]

Says the guy who can’t dial in a carburetor