2 gang switch wiring

[@mohammedyaseen2099]

No explanation needed. Excellent video. Probably the best to explain from a wiring point of view. Thank you

[@user-ck3fd1td1w]

ماعرفت لمفتاح اللنبه حتى شفتك والله تستاهل ١٠٠٠ لايك 😊❤

[@lil-pNG]

Thanks it helped me today 😅😅

[@llama8452]

This video helped so much and when I got stuck i came back and watched it again. Thank you

[@GJ0KYZ]

Great video, thanks. That's saved me having to call an electrician. Subscribed.

[@UdegbunamChuks]

Thank you so much. One of the wires on mine came lose and this helped me fix it without calling the electrician 🎉🎉😂😂

[@owenjones-wells9395]

That's perfect. Clear and easy to follow. Thanks.

[@Etzjoshman]

After using hours of hours to fix my light bulb, this video helped me

[@jameselliott4671]

Good one it's always hard for me to run it but I. Learned now thank you

[@i.o1828]

Great video, thanks. That's saved me having to call an electrician. 👍👍👍

[@user-nd6ix4xl9h]

well done,I like the way you do it

[@malagafarlopa]

Brilliant 🙌 you’ve got another subscriber

[@creativecapricorn9261]

Perfect.! Simple explanation without saying a word...! Well done Mate 👍🙂

[@fryertuc1]

great help easy to follow thanks

[@heshanshibry6575]

thanks this video was helpful today coz I was doing wiring like this except this neutral wire goes in series and and I did it in parallel and this was very an it was a very useful video thank you once again. I won't forget it again.❤❤❤

[@man9134]

He forgot to turn off the mic, simple and useful 👍

[@JohnSmith-ox7xc]

Was the switched live cable reversed between the bulbs during the cut when you flipped the switch over? Originally it looked like the left light was connected to the right side when viewed from the front ( left when viewed from behind ) and vice versa.

[@michelledunn6712]

A picture is worth a thousand words.

[@eddiebest1951]

Just what I was looking for 👍

[@philipotienoochieng]

That's perfect thanks so much 👏👏👏👏

[@AbdulRashidGhulam]

Good explanation. From Qatar

[@kenicto]

Next time try to put audio in your videos to help beginners learn properly.

[@DavidDaniel-br5by]

Very simple to comprehend

[@hakeemokanlawon6637]

I believe I can follow the same step to use a 2gang switch for my wall bracket and center bulb

[@cassdemz2345]

Thanks so much is wonderful job

[@onahoretmizantropov9935]

Thank you very much.

[@kenicto]

Next time try to put audio in your to help beginners learn properly

[@monilpatel3112]

Thats great explanation

[@edierwan1]

thanks .. learn from your video

[@mutalenjovu3444]

Thanks, nextime include vocals

[@caneman707]

Omg! Im so stupid! It all make sense now! You explained to me without even saying a single word! THANK YOU!

[@Ryan-Ellis]

Literally without saying a word🤣

[@chinyoonglee1671]

Hahaha... Maybe silent mode... 😂😆

[@myemnaing7047]

Thank you so much

[@SiEmon_E]

Viewing this on my phone where the picture is not so brilliant so would appreciate knowing what the first two are you bridged across. We're the terminals labelled Common, or L1 or L2? And then Wray are the others.

[@SiEmon_E]

Just had a look on my laptop and can now see the labels. Thanks for the vid very helpful. 👍🏾

[@MrDBSV8]

great video

[@MohammedMohammed-gb6bi]

عاشت ايدك ربي يحفظك

[@user-he9te5co8x]

اخرس هذا

[@dcmania5062]

Just finish doin it thanks

[@revordmathias]

Big up master🙌🙌🙌

[@tendochristine3792]

I thought each gang for each bulb, but yours one gang switches them off at one

[@CliffBollora]

Gud job brother

[@karlossmith3714]

If I want to run my 12v lights off a common single household light switch..how do I wire it please? Any help would be greatly appreciated

[@karlossmith3714]

Would it be..live from battery to top hole, live back out of bottom left hole to the lights then negative from bottom right hole to negative on lights

[@powerelectric8833]

Hi from buttery use only + to switch the light, and - direct to light

[@jamesmyrthong6112]

Thank You Power Electric.

[@powerelectric8833]

Welcome

[@SiEmon_E]

Do you not need to see the L1, L2 and Common etc or have I just got a complicated switch?

[@powerelectric8833]

Use L1 if you're switching 1gang. 1way

[@SiEmon_E]

@@powerelectric8833 OK thanks for response 👍🏽 I'm trying to wire a double gang switch which has two of each= L1, L2 and Common (six in total)

[@animbanson384]

Perfect!!!!

[@manuppa]

Thank you 👍🏻👍🏻👍🏻

[@leokamwasha3669]

Learnt something here

[@hairulerdie3424]

Alhamdulillah

[@musajunior7393]

Lov this

[@user-mx9no7kz5b]

رائع جداً

[@justinmiawkanyantoons2_3006]

2:23 Owh, 👍🏼👍🏼

[@popstargh2238]

Wow nice video

[@AbdulRashidGhulam]

Excellent

[@onevibrationclothingandcom4502]

Perfect

[@hakeemokanlawon6637]

Thanks a lot

[@lumagabriel6183]

How come the two bulbs lights at the same time?

[@alextycky]

Because of the live , bettwen those liver, there's main and supporting... A liver that lights 2 bulbs is a main as it it receive the power and also transfer to second liver,if the power finds second switched on the bulb will light

[@BobBenz55]

Thanks for the vid, finally got it working. So help full … 😂👍🏼

[@ariftanoli9768]

Ggod job

[@beyengtb6297]

Silent is good 😌

[@lumagabriel6183]

How come the two bulbs light at the same time?

[@emmanuelabade7928]

they did not light the same time it just reflected

[@markaustinsickbasshead274]

Good video

[@powerelectric8833]

Thank you

[@desmondameyaw3493]

Bro can u show how to wire a ceiling fan

[@jimmymorgan3324]

HOLDING. THAT. SCREW DRIVER BY THE. SHANK. BAD BAD. HABBIT.

[@powerelectric8833]

🤣🤣🤣🤣🤣

[@blbhansel8226]

pls what if i have any earth wire , where do i fix it , because as i can see in the video , u have just the Live and Neutral cables ? pls help

[@powerelectric8833]

You only use earth wire where is metallic object

[@keepfitcop1713]

Good, but why use two way?

[@noor.t.v.kurigram9868]

😮চাজাক😅

[@martyscv]

Cant you talk to explain it

[@MohanSingh-ln2dw]

I saw red connect to the switch n one end of the bulb. The black connect to one end of the bulb. Where is the other end of the black connect to? And I saw u bridge the switch with a piece of red wire. Can u tell me the reason why. To my suggestion I think is to make contact with both switch. Is that correct?

[@abyssalrise9254]

I saw u bridge the switch with a piece of red wire (is to distribute the LIFE power from house main power supply to both switch).. your suggestion is correct. then, from each switch going to supply each bulb... (when switch ON)

[@mdsabih9348]

2gange me alag alag light 🕯️ ko jalaiye sir

[@alhajikanu8784]

❤

[@ochajohn2192]

Nice one,

[@powerelectric8833]

Thank you

[@wmursai]

That’s easy 😮

[@vonwynn7447]

#1

[@samuelsnr0264]

So how can one gang control one light and the other gang control both lights...... Why ? Please 🤔🤔

[@mohamedmansoorali5310]

Each Gang is controlling only one light... See the video again.

[@powerelectric8833]

Yes

[@aimandjulian3195]

fantastic

[@mursal6554]

I don’t understand how to wire connect another wire 🥵

[@eyeofthetiger6002]

So the whole set up involves live wires?!😲

[@powerelectric8833]

🤭

[@manukushwaha5636]

I don't like