2 Into 1 Burner Exhaust Install On 2020 Honda Fury/Sound Test

[@papichulo7757]

Make sure you remove the black bar that was holding up your pipes

[@felixmontoya8387]

How is that done?? I loosened it up and it doesn’t seem like there’s a enough space to come out

[@jamiemayer]

Hey my friend that exhaust bracket hanging down in the back on the right side running parallel with the swing arm you do know there's only two bolts holding that in and you can remove it Besides it looks really really cool with it off

[@EsotericRider]

I took it off right after I ended recording, I somehow completely forgot about it while removing the original exhaust lol

[@felixmontoya8387]

Mine doesn’t seem to want to come out. Did you have any problems getting it out? It’s a fight fit

[@jamiemayer]

@@felixmontoya8387 if you're referring to the exhaust I had no difficulties whatsoever there is a bracket that is on the right side just below the swing arm you need to disconnect that from the mufflers then you disconnect the head bolts from what I remember I did mine seven or eight years ago that was the first thing I changed I didn't have any issues you can always run the bike about 5 minutes before you do it to get those head bolts loose but I suggest disconnecting the bracket first from the mufflers before doing so

[@felixmontoya8387]

@@jamiemayer it did have to wiggle and force mine out yesterday but it’s finally out thank you very much 👍🏼

[@jamiemayer]

@@felixmontoya8387 you're very welcome

[@CactusJack252]

Moore Mafia has an ECU tune for these bikes now

[@brettcreech3490]

Not my jam I like the Cobras. I thinking about getting the Cobra Swept pipes on my 2015 Stateline. I think they will sound great and go with the lines of the bike. To each their own.😎

[@JdoggJ1]

Nice mann waiting on my backlash to come it to put on mine 👍🏼

[@edwardakin7243]

I live in Missouri we ride all year round I just put different tires on it

[@timmorino4005]

Nice video man! Hey smokin tyre got ahold of me and my pipes are gonna be in next week. You should give them a call

[@hebrewmatt4305]

Did they ever show up??😂😂 I’ve been waiting 15 weeks and counting

[@richardhernandez3088]

Nice man 🔥💯🔥💯🔥💯

[@eaglemax]

No o2 sensors?

[@jeremyfielder323]

Did you paint your motor? If so, looks good..Just use the high temp black paint?

[@EsotericRider]

No actually! That's factory.

[@timmorino4005]

How tight did you go on your exhaust bolts?

[@felixmontoya8387]

What kind of gasket do you use ?

[@jeffreyfeit4344]

Great pipes

[@jonytrujillo7626]

Are these leg burners ?

[@zacharyjohnson5847]

Did you have to do a ecu flash or use a power commander after install ? Thanks

[@EsotericRider]

No, but it is reccomended for the best performance. I ran those pipes with a cobra fi200r, and they ran good but I would have went with a hi flo air I take to top it off.

[@ShiftyReaperGaming]

Did you paint that motor?

[@EsotericRider]

Nope! Bone stock.

[@brandonrogers5557]

Are you still liking the pipes. Do they burn your leg?

[@EsotericRider]

I liked the pipes but I swapped them back out due to the massive backfire with stock air cleaner. Sounded great at idle but de accelerating pop was big. And no they didn't burn my leg, but it was extremely easy to do so, just have to be very cautious about it.

[@texasdirtbikerider3335]

@@EsotericRider All you should have to do to fix that is get it tuned. Should give you some more power also.

[@scottytoohotty7617]

Never cared for short pipes. Sounds great though.

[@1312cc]

I thought the bike wouldn't start if the kickstand is down???

[@jerry329_06GT]

It will if it's on neutral

[@StruddleToaster]

Did you torque to spec or just wrist tightened the bolts back on the exhaust

[@mikebrown5648]

Nice bike

[@jamesgordon4433]

Nice

[@RugerBlackHawk]

Did you put on a power commander?

[@EsotericRider]

No, fi2000r.

[@donnyhud]

now ya dont have any back pressure! youll burn your valves out in about 5,000 miles

[@zarekbaten5992]

Ya ok Mr mechanic

[@donnyhud]

@@zarekbaten5992 yep thank you, been working on motorcycles since 1987

[@Daves_Man_Cave]

Too loud and you are losing torque and power with a short pipe like that, even if you dyno tune it, you will still lose torque, which is kinda what that motor is about.

[@stevetyre9486]

12hp gain. Dyno proven

[@Daves_Man_Cave]

@@stevetyre9486 Cool, let's see the chart. It may pick up peak HP but they usually lose power lower down the rev range.

[@Daves_Man_Cave]

@@stevetyre9486 Additionally, there is no way it picks up 12hp without fueling changes. If the exhaust changes the flow enough to pick up a massive 12hp at the wheel, then it changed the flow enough that it needs to be tuned. There is no free lunch with this stuff. The stock bike would have to be running a filthy rich AFR from the factory, for the new pipe to essentially lean it out to a proper 12.8-13.2 range to make optimal power, which of course it would never do... I can see a bike making more power with a free flowing exhaust and a tune if it was really restricted from the factory... but these bikes come lean from the factory, and a change that could make 12hp more, would 100% require fueling changes, else you are running so lean that you risk damaging the motor...

[@stevetyre9486]

@Dave's Man Cave a customer dynod my pipes with a tune and filter 10 or so years ago. It was compare to stock pipes and cobra pipes. 12hp over stock 2hp over cobra. These pipes on this bike aren't STG pipes. My pipes are torque stepped to help low end

[@Daves_Man_Cave]

@@stevetyre9486 Right, but with a tune. The guy that posted the video said no tuning changes were made. A pipe that changes the flow so drastically that it adds 12rwhp, will absolutely need a tune in order to get those gains and run safely... 12hp on that motor is a massive percentage of increase. Running it with the stock tune risks damaging the motor...

[@leadsolo2751]

Never liked 2 into 1s ... here's why 😂

[@marklatham8601]

Won't be able to hear your tunes!!😊

[@perryjones8997]

hint....ALWAYS do a BEFORE and AFTER test....hell...pipes you took off may have sounded just as good as pipes you put on...never know... wow...is this not simply common sense...not trying to be rude here...but this video tells us how the replacement pipes sound...not how much better/worse compared to the old pipes...or else...why replace them in the first place???

[@EsotericRider]

i get what you're sayin', and i agree. i would have done that, but being i have already done a separate video with the cobra pipes, install and sound test, i figured it wouldn't be necessary, plus almost all of my other videos have the sounds of the cobra pipes. i leave it for my viewers to decide whether they think they sound good or not, and i just simply give my personal opinion afterwards. if they have something to be said about them, i usually do a separate video like a follow up to them, just so i have more content for my channel, and a video in itself to focus on just that, not 4 things at once, being everyone's thoughts on them will vary.