2 Mods I Regret & 2 Must Haves on my Yamaha V Star XVS 650

Most people like to mod their bike and make it their own to stand apart from others. I share with you guys 2 mods that I regret doing and 2 mods that I think are must haves for my Yamaha V Star 650.
_____
MODS LIST:
Black Ops Bobber Kit
Vance & Hines short shots exhaust
Skull springer seat
Plasti-dipped Headlight
LED front headlight
Aftermarket Mirrors
(US Link): amzn.to/3i7aik8
(Canada Link): amzn.to/3hXBVw1
Aftermarket Horn
(US Link): amzn.to/3Z0jYgR
(Canada Link): amzn.to/3VBPwGP
Side-mount license plate
(US Link): amzn.to/3G3Sj5T
Canada Link): amzn.to/3GsQJMs
Aftermarket signal lights
(US Link): amzn.to/3WzDv61
(Canada Link): amzn.to/3WyXL7S
Signal light bar mounts
(US Link): amzn.to/46eXqvY
(Canada Link): amzn.to/46eXqvY
Final drive shaft cover
(US Link): amzn.to/3G0RRFA
(Canada Link): amzn.to/3VAgNtl
_____
Don't forget to SUBSCRIBE to my channel for new content every week!
_____
Tags: #Yamaha #Vstar #XVS #Custom #motorcycle

[@sle2979]

You talking about that seat not being comfortable was funny af😂

[@coreyjones8563]

As mentioned in another comment Blue Collar Bobbers has amazing seats. They’re a bit pricey but I had a cheap bobber seat before and switched over to the 13” super cushioned seat and it made a world of difference

[@SnackDetour]

Thanks for the comment! I do like the look of the 13" black diamond stitched. Cheers!

[@barcharmc6216]

I have the blue collar bobber seat, it mounted super easy and feels like a dream

[@brians.1247]

The first mod I did for my 2008 Yamaha vstar1100 was the headlight, I put an LED conversion kit and then I added passing lights to my motorcycle all 3 lights have LEDs and all have high beam, 143,000 lumens per, because I need to see farther up the road at night because of deer and it makes cars notice me more, second mod was the horn which I rarely use because of my bright front lights. I converted my signals and brake light to LEDs also..in my state if you have a loud exhaust or even if you don't have the original manufacturered exhaust they will fail it for inspection, so my exhaust mod went out the window for now..I have other project mods in the works over the winter..

[@NiteWolf_Gaming]

I put the short shots on my old Shadow 750. Sounded mean as can be. Such a deep rumble sound. Great set of pipes. Current bike is a V Star 950 with Freedom Performance pipes. Loud as can be. I have to wear ear plugs at times on long rides due to ringing from the exhaust, but loud pipes save lives. Just remember to keep the rubber side down and the shiny side up.

[@kenwittlief255]

you put straight pipes on your bike and you wear ear plugs, so you cant hear anything thats going on around you and neither can anyone else Brilliant!

[@KevinPon.]

The louder horn is definitely a must have! I'd do the same. Very good mod

[@brians.1247]

Hi, if you want a more comfortable Springer seat for your bobber you could get the seat reupholstered with a thicker inner cushion, they will use the same pan, or you could diy. Just watch some videos on youtube see how other people have done it..

[@mikemaiocco2538]

I have a 03 custom 650 and I installed the seat from a classic which is pretty comfortable

[@SnackDetour]

Yeah the original seat was much more comfortable. I went with style but my butt is paying for it lol 😆

[@mateusstafocher8328]

hi guy, i from brazil, i have a drag star 650, and its a very pleasure watch this chanel

[@SnackDetour]

Thanks! I'm glad you like it. I'll try and put out more v star videos before the snow hits here in Canada. Cheers!

[@revelationakagoldeneagle8045]

Our "Bums" do deserve better! I'm in the process of rebuilding my V Star Silverado. Gonna try to retain the original seat, it is very comfortable. But if I do change it, it'll have to be something with more cushion than most spring seats. Keep The Shiny Side Up 👆

[@bebekadventure]

if you want to change the seat but still springer you can addapt the seat from HD Duo Glide .

[@JasonJohnCowart]

TLDW: Hates: Bobber spring seat and the aftermarket turn lights. Likes: Horn upgrade and aftermarket exhaust. You're welcome for saving you 5:41.

[@aldopineda2686]

do a pod kit and that will be your number one mod! its night and day when you get a pod kit man! and super easy to install and re adjust the carbs! take no longer than 2-3 hours

[@hugavet3049]

pod kit? for lights?

[@pw1715]

@@hugavet3049 its an air filter and jet kit for the carburators

[@pingpong8264]

Signal lights " KELLERMANN ATTO DARKLED BLINKER " From Germany 👍

[@landshark9603]

Great video. Love the horn. It’s a definite upgrade for me now.

[@anothergerman88]

To make yourself feel better at present I would suggest that you get something to put over the seat. A gel pad doesn't take up much space can be placed on the seat for when you ride. No one will see it because it's under your ass that will help for now. But there's a bigger problem with the solo seat in that is that you can't pick up a chick. With my V-Star 1100 I went with the stock seat took off the sissy bar and saddlebags and it looks amazing

[@ericr8231]

The roadrunner horn 😂😂 had my dying

[@1silvervespa]

When hitting the Horn just expect that eventually one driver is going to steer towards you in panic .... be ready to react to that too .

[@scottwalker3212]

Try Stedi indicators bro. Australian ones. They are great.

[@TheDJRiffin]

Summary: 2 Worst - bobber seat (uncomfortable), cheap indicator lights. 2 "Must Haves" - louder horn, new exhaust.

[@chris_rrr7184]

"I feel like my butt deserves more"... lol

[@tdublove9558]

I laughed so hard that's exactly how I felt on my brothers V star bobber my seat on the other hand is so comfy lol

[@conversepfflyers]

That horn scared the BEEP out of me.

[@SnackDetour]

Lol nice one

[@elsharkone7]

I would like to get a better exhaust but I don't want to wake up half my neighbors when I warm up with choke open :) Also, new horn is a great idea, must look into it.

[@SnackDetour]

Hah yes it's pretty loud when choke open with an aftermarket exhaust. I usually crack the garage door to warm it up then open it when the choke is closed.

[@leehoeun2919]

Good for you, even though you don't feel comfortable

[@fernandovazquez2384]

Dude your bike runs amazing! Mine has trouble at 70 mph or so like its maxing out any tips ?

[@robertsebastian787]

Thanks for the video!!!

[@ashitanojoe69]

Which country do you live? The road condition is terrible... And it looks like normal in your country. Anyway, safe drive and enjoy the life!

[@SnackDetour]

Canada, our roads are pretty bad from the winters wrecking havok with freeze thaw.

[@LimitlessStrengthCoaching]

Hey brother, do you just have a stock air intake? I’m looking at getting a short shot but trying to work out if by doing that and adding a k&n filter, will i need to re-jet? Cheers brother

[@SnackDetour]

Hey man yeah I just have a stock intake right now. If you get the exhaust and the intake you will definitely need to rejet. I've seen some do the exhaust and no rejet but the exhaust will definitely back fire. Cheers.

[@MiscName]

Do you ride with earplugs? I have the same bike/exhaust and I just can’t ride without earplugs. Kinda annoying how loud it is.

[@SnackDetour]

Hey dude, I actually don't ride with ear plugs. It's not bad because I have a full face helmet. If you ride with a bucket then I think it would be way worse and yea I'd def need earplugs then.

[@anthonykimmerly217]

I have the same bike, where did you get the horn at? Great idea for safety!

[@SnackDetour]

Hey man, I got it form my local parts store. It's called a Fiamm freeway blaster. Don't forget to subscribe! Here's a link on Amazon: www.amazon.com/FIAMM-72112-Freeway-Blaster-Note/dp/B000DINKPQ/ref=sr_1_2?crid=231FOQNIX3X52&dchild=1&keywords=fiamm+horn&qid=1599405761&sprefix=faimm+horn%2Caps%2C197&sr=8-2

[@hammatime94]

The indicators are like 8 bucks usd a set.. they are as cheap as 12-15 aud

[@BeardedEgg]

Did you do the ‘Gonzo Air Kit’ when you installed your pipes?

[@SnackDetour]

Nah but I heard a pod kit increases your mid range, but I didn't want to FK around with the jetting again

[@charleswilson4526]

If you want a comfier seat, go get a mustang seat

[@auris546]

i have the same exact turn signals lol bought them from aliexpress though

[@SnackDetour]

I hope they don't burn out on you. It was a pain sourcing bulbs lol

[@charleswilson4526]

Just get a low profile seat and lie onto the fender... springer seats look cheap IMO

[@narrowonflow]

iv seen seen someboyd put a jelly pad under the seat instead of springs... idk how well it works tho

[@kenwittlief255]

you cannot stop or deflect another vehicle using sound waves or colored lights when someone is encroaching on your lane take evasive maneuvers FIRST to avoid a collision. THEN when you are no longer on a collision path blow your horn if that makes you feel superior. sooner or later you are going to blow your horn at someone who is deaf, intoxicated, or unconscious, and that will be the end of you, they will keep on coming I blew my horn (in my car) once at a truck that was backing down a driveway and not slowing down as it approached the street. There was NO ONE IN THAT TRUCK.

[@Fuzzbuzzed]

Just wondering what kind of mic ur using for blogging. It sounds pretty good

[@SnackDetour]

Hey man, I use a Sony ECM-CS3 in my helmet.

[@yroftheogre]

hey your in edmonton

[@drbrq7674]

Nice V Star. What horn is that? I like it.

[@SnackDetour]

Thanks dude, it's called a Fiamm freeway blaster. If you haven't subbed already I'd really appreciate a sub! Cheers! Here's a link on Amazon: www.amazon.com/FIAMM-72112-Freeway-Blaster-Note/dp/B000DINKPQ/ref=sr_1_2?crid=231FOQNIX3X52&dchild=1&keywords=fiamm+horn&qid=1599405761&sprefix=faimm+horn%2Caps%2C197&sr=8-2

[@chrisssergio]

First time rider here, got my a 02 Yamaha v star 650, was wondering when purchasing the Vance and Hines exhaust and installing it, did you rejet the carbs? If so, where did you purchase them? Been looking around and I don’t have like a specific link to them, thank you

[@SnackDetour]

Hey Chris, I got them here: (I'm Canadian so this is a Canadian website) fortnine.ca/en/vance-and-hines-shortshots-staggered-exhaust-18519?pk_cid=1768282015&pk_campaign=aud-308888279495:pla-679792278468&pk_kwd=&pk_source=google&pk_medium=paid&pk_content=71546087880&gclid=Cj0KCQjwp4j6BRCRARIsAGq4yMHZI4e-M-S2n_IMZ1rTfjpOwdjX4h7-eyp0-QjjRj-A1HCUCJAIT28aAnVCEALw_wcB Yes I had to rejet. With carbs you need to rejet if you do exhaust and intake. Otherwise it's running too lean.

[@chrisssergio]

Snack Detour life saver🙏🏼🙏🏼🙏🏼

[@derrick.l1870]

Cool and where did you get that horn at ?🤔😊

[@SnackDetour]

Amazon or your local parts store should have it.

[@derrick.l1870]

@@SnackDetour yeah OK and I want the one you have🤔

[@SnackDetour]

@@derrick.l1870 I should have a link in the description for the horn

[@derrick.l1870]

​@@SnackDetour yeah OK and I'll check it out and preciate cha on that 411

[@xzyzz9662]

How do I get one of these rear fenders?? the last one on earth is gone…

[@SnackDetour]

Custom at this point lol

[@davegoodo3603]

Hi Jax, I'm looking at aftermarket exhaust for my xvs650, it seems that Vance & Hines are the go, I'm trying to decide between Short Shots and Cruzers. Do you have any suggestion there?

[@SnackDetour]

I like the short shots because that is what I have plus I like the looks of them more. I think in terms of sound they're about the same, the short shots may be louder though.

[@MiscName]

I have the short shots, they do look great. IMO they’re a bit too loud though. So loud... Great sound though.

[@Daniel-iu7ob]

What is top speed you can ride withdowt force the bike at maximum ?

[@jatt_superbiker]

hey your bike seems to run great and thanks for the advise. I also have a xvs650 and got one problem... it seems to be slower than normal and it misfires a lot. It's top speed is 55mph (when it should reach 90). I have a straight pipe system but stock jetting and air intake. (bought it as it is) As air intake i've been thinking about Baron's xXX and a Dynojet kit. What you think?

[@SnackDetour]

Hey Tarinder, if you have stock jetting with an exhaust and an intake it's running way too lean. It's getting too much air and not enough fuel. You must get it rejetted asap with the mods since it's carbbed there is no ecu to "learn" the new mods. That is why your speed is so much slower.. it will probably bog and not ride right... So get it done ASAP. Be safe out there. Cheers.

[@jatt_superbiker]

@@SnackDetour sorry i meant to say stock air filter box and stock jets. Still need rejetting and new air intake or just cleaning. Ultrasonic maybe?

[@SnackDetour]

@@jatt_superbiker you should look into a pod kit and rejet. That will net you the best performance gains.

[@jatt_superbiker]

@@SnackDetour thanks will look into them

[@jrattackk]

Probably bad gas too or clogged carb. Ethanol is hell on carburetors. Always run high octane or 100% gas if available. I’d add an octane booster to the tank and see if it runs better

[@JaredVeale]

Don't need a horn bro just get louder pipes :)

[@alex--3560]

Awsome bike! I got a 11 cheap bobber seat, and i know exactly what you mean. I switched back and forth all summer, love the look of the bobber seat, but love the comfort of the original seat. Would love a 13 or 16 bobber seat from Blue Collar Bobbers but i dont have the money for it right now, i have searched around for a cheaper alternative but found nothing. I have those indicators aswell haha, looks awsome, but awfull quality. Where did you get those mirrors? Vance & Hines on these bikes sounds amazing!

[@SnackDetour]

Yeah the comfort of the original seat is pretty darn good. That's alot of work to switch back and forth. I'd have to put back all the old fender and stuff each time hah. Ill be making a video on a nice fix to those signals in the near future. As for the mirrors I got them off Amazon there a link in the description.

[@BattleCat3879]

I have a blacked out Yamaha V star 650 bobber, also a solo seat bolted on the frame. It is so uncomfortable. But it is almost impossible to get a solo seat.. complete and fitting for a dragstar 650.. I have blinkers on top of my handgrips. Perfect 2 is enough with a drag bar. bluecollarbobbers have perfect seats but with import to Europe it will cost 550 euro’s wayyyy to much! I’m still looking maybe someone has tips?

[@SnackDetour]

Man that's crazy. So you just straight up bolted a seat to the frame with no springs? You can prob get an adapter plate made locally if you can find a metal fabricator in the UK willing to do it.

[@bigchungus2493]

Where did you order your short shots?

[@shaanmeet]

i can't find that stinger fender can you please post link , I'm Calgary too .

[@SnackDetour]

Hey dude sorry but the guy that produced these fenders no longer does them.

[@austin3424]

Hey man, I’m just wondering where you got your rear fender from? Would like one for my bike

[@austin3424]

Nevermind lol just saw the other comment about the fender

[@SnackDetour]

Sorry dude, looks like they stop producing them.

[@72panam]

Nag nag .. there's vw convertibles much comfortable.

[@OLDBD1]

Nice

[@cardiojim]

I thought you were going to say you got a chip or something to make it go 186 although it is a bit windy at 85 for me with thick humidity in Florida

[@SnackDetour]

Hey James if you want to get decent performance bump for the 650. You should look up a pod kit to replace the stock restrictive air cleaners. Really changes the bike from what I heard hah. Cheers!

[@cardiojim]

Snack Detour thanks, I think I will keep it as it is and get another bike 🥰👍 I do love it and I don’t want to mess it up. 85 seems fast enough. Gets to 70 quick and then 85 takes a little bit. Sometimes on back roads when I have a short distance to pass cars going 10-15 under the limit I just want to pass faster... maybe I will try it👍

[@SnackDetour]

@@cardiojim hah good idea. I like having my 650 for the city. I'm definitely getting a highway cruiser next season

[@chrisfletcher3525]

Did you have to rejet after switch exhausts?

[@SnackDetour]

Yes I did. If I were to do it all over again I'd do a pod kit along with exhaust same time and just rejet once.

[@chrisfletcher3525]

This may be a silly question but how do you know what jet size to go with. Is it trial and error or anything specific. I bought my v star a year ago and it didn't run. I rebuilt the carbs and have got it running pretty well. I'd like to put the shorts hots on it but haven't wanted to tear it apart again without having the knowledge I need.

[@SnackDetour]

@@chrisfletcher3525 looks like the website I used no longer exists. Try to find screen shots for 650 CC&D

[@MartinHernandez-qe6qg]

How can i up gread the seat on my v star 650 just got it a few weeks ago any suggestions??

[@SnackDetour]

Yo bud, not sure what you mean by "gread the seat", but if you're looking at putting on a springer seat on your 650, you will need an adapter plate. Typically you can get this from your choice of bobber kit sites. Cheers!

[@kevinsolove458]

Just get your seat repadded by any car reapulster person... tell them you want thick cushion or whatever you want...

[@kenwittlief255]

do it yourself, the cover is just stapled on or stuff some foam padding in your pants.....

[@user-ee1em2qi8n]

do you have a link to that specific horn ?

[@SnackDetour]

Yes! It's in the description of the video.

[@user-ee1em2qi8n]

got it, thank you !@@SnackDetour

[@durtysouthkustomz8862]

Thinking about getting one , I got a guy trying to trade me a 2000 vstar classic for my atv ....thinking about doing it ...bike only has 8k miles

[@SnackDetour]

Damn that's pretty low miles. If its in good condition and you want to ride a bike instead of a quad, Id say do it!

[@durtysouthkustomz8862]

@@SnackDetour well I have few places to ride around here ...and have to travel a few hours to ride I just want to be able to have something to ride ...only reason I don't is because I have more in the quad than what he was asking cash ...

[@SnackDetour]

@@durtysouthkustomz8862 Ah yeah, that would make sense unless he was willing to add cash on top, but its hard. Make the trade only if it makes sense for you. Sleep on it bro. Cheers

[@durtysouthkustomz8862]

@@SnackDetour I mean it's something I could ride out the driveway and go down the road the atv .is something I can ride where I'm at but not with a lot of people, my riding style is different than most of my friends, they drive 2 and 3hrs to go riding I don't want to do all that .....plus every time I take it out there's a good chance in messing something up and then it being down again with bike you keep it up and it will probably go forever because you don't really beat on it like trails and stuff does to atv ..........so my main questions are these bikes pretty good for 650 ...like would it like riding 300 to 400 lbs combined weight of me and my girl or just me .....dudes trailering it from Kentucky to North Carolina if agree and then going to ride it one last time on the beach because riding down the coast is a dream of his and then he would be trading me because the beach is a hr from me

[@SnackDetour]

@@durtysouthkustomz8862 For the most part if you take care of it, they're very reliable. Just got to grease the splines with a moly based grease on the final drive as these bikes are shaft driven, not chain/belt and this is the most common failure. The weight shouldn't be an issue, but for long rides on highway, I would defiantly want something bigger. I know a lot of people take the 650 on the highway and its perfectly capable, but anything above 70mph it starts to really scream lol. Especially if you're riding two up a lot I'd want something in the 900cc+ range for cruisers. I do agree that a bike you're able to go to places and do things while ATVing you're mostly out playing in the woods. Cheers!

[@chrisshelton9589]

You don’t put a spring seat on a bike with suspension.

[@vincentdorsey8545]

Harley did it first in 1958/59

[@chrisshelton9589]

I have a ‘59 sportster and the reason they have a spring seat is because the suspension is non existent. Modern bikes are a completely different story. The seat springs will work against the bike suspension.

[@bryanmayes9234]

That in berta🤔

[@BattleCat3879]

P.s I subbed!

[@SnackDetour]

Thanks I appreciate it! Cheers.

[@franzdejesus8442]

You got the link for the mirrors?

[@SnackDetour]

Hey Franz the link is in my video description.

[@franzdejesus8442]

@@SnackDetour oh I didn’t check. Thanks.

[@Rcbiggie1]

Did you get horn off Amazon?

[@SnackDetour]

I got it from my local parts store because it was cheaper than Amazon. But here's the link of the one I have www.amazon.ca/FIAMM-72012-Note-Universal-Bracket/dp/B000DN7T3A?ref_=d6k_applink_bb_dls_failed

[@Rcbiggie1]

@@SnackDetour Thanks

[@SnackDetour]

@@Rcbiggie1 no problem!

[@jeremybenwy5928]

31 i get that lol😂

[@snowman1278mw]

The ripe age of 32 hahaha talk to me when your 33 hahaha

[@gphilipc2031]

They came from Gina.

[@frios011]

Bobbers are not bikes for taking long trips! Bobbers are for in town cruising and for short rides!