2 Simple Thin Strip Jigs

So following on from my vlog video where I mentioned I have some boxes to make, I want to make some inlay banding to put on the boxes, to do this I need to make thin rip cuts on the table saw. The table saw blade at times would be very close to my fingers and im quite happy having 5 digits on each hand. So ive made these jigs to help with that operation.
The first jig was the only one I intended to make, and will most likely be the one I use the most often, it works really well and im getting some really good results from it. The 2nd jig was an after thought, but will still come in handy with really thin strips of wood.
The bearings I used are these: amzn.to/2UfOJyi
Disclaimer: How I use my tools, equipment and PPE is down to my choice. I use these based on my experience of using and operating these tools. Do not think because I have done something a certain way it is safe for you to do say. Always follow manufactures safety guidelines.
Thanks for watching, should you which to contact me, you can do so via the methods below.
Patreon: www.patreon.com/jamesmancave
Instagram @jamesmancave
Contact - [e-mail]
-------------------------------------------------------------------
Channel sponsored by
ABRACS
www.abracs.com
abracs_ltd
AbracsLtd/
Abracs_Ltd
-------------------------------------------------------------------
As an Amazon Associate, I earn from qualifying purchases made through these links.
The tools and products I use:
AEG: (known as Ridgid in North America)
AEG 18v, impact driver - amzn.to/2OWuD8S
AEG 18v, Brushless 190mm circular saw - amzn.to/2OwcWhq
AEG 18v, orbital sander - amzn.to/2zNZ2je
AEG 18v, Reciprocating saw - amzn.to/2Dubg1C
AEG 18v, Brushless 18Ga nailer - amzn.to/35Ng2U3
AEG 18v, Brushless belt sander - amzn.to/35JNj2I
AEG 18v, Brushless trim router - amzn.to/2OrouTc
Evolution power tools:
Evolution Rage5s table saw - amzn.to/2KKRU9V
Evolution R255SMS mitre saw - amzn.to/2Lyz76u
Evolution R185CCSX+ - amzn.to/2IOud1o
Evolution 2x700mm Track - amzn.to/2ITMEC6
Evolution 2x1400 Track - amzn.to/2KWGnZ0
Other power tools:
Stanley jigsaw - amzn.to/2vUlNPE
Stanley 18v random orbital sander - amzn.to/36dSdFf
Ryobi random orbital sander - amzn.to/2wy1tVA
Wagner sprayer - amzn.to/2OBIFyX
Clamps, jigs and other stuff:
Irwin clamps - amzn.to/2MHnSpu
Irwin squeeze clamps - amzn.to/2MHnSpu
Irwin sash clamps - amzn.to/2P1Io54
Irwin handy clamp - amzn.to/2wn313G
Irwin card scrapper - amzn.to/2PZFvCF
Speed square - amzn.to/2OtceP8
Gorilla wood glue - amzn.to/2P2QFpI
Epoxy resin - amzn.to/2O6bYZY
Triton pocket hole jig - amzn.to/2XVXVvJ