2 Stroke silencer maintenance

[@mikemaahs638]

What? I'm not the only person who cleans their bike before they work on it wow! Nice!

[@saularb3037]

0:53 the cartoon running sound effect 😂😂

[@josephciske5566]

it's a lot easier to just hit it with a propane torch and scrub it with a wire brush.

[@mikegrady4]

What he said...I use a wire brush with a long cable hooked to it and yank it through the inside a few times after the thing has been heated with a torch.

[@vastianocara1792]

or a pressure washer...

[@WilliamStewart1]

Joseph Ciske Oven cleaner and water is all you need.

[@ow-my-achilles1106]

Insert M80 into perforated silencer tube. Light fuse, take cover, that should clear those holes.

[@Scythe_Voltage]

Amazing video, well edited, great camera angles, keep up the good vids 👍

[@sicks6six]

Way way back we took full system off and bunged one end up. Stood it on end and filled it with baking soda and water. Let it stand overnight and when emptied it was spotless. Brand new shining. New cleaning products like jizer stopped people doing things like that. Try it. I've never used anything better. A cup of baking soda for a full exhaust system from header to end can used to work great. Baking soda is very cheap..

[@KurumaDesigns]

Very nice video, but a tip: use a propane torch to burn away all the carbon buildup in the holes on the core, takes a lot less time and effort then drilling them all out ;)

[@leesin2363]

+1

[@canadaplace2be176]

Aaa burn. Then inhale it aaa no wrong. Dont burn. Weaker the products. And smells.

[@husky3009]

Kuruma Designs , or a wire brush

[@xipingpooh5783]

Agreed.. but on occasion I’ve had to use the drill but method as well. If left for long periods I’d becomes hard as a rock and no amount of torching will remove it. If maintained properly the buildup will not become like a rock, but we all know how that goes...

[@aerooo3466]

Why is this so satisfying

[@stupidmoto]

wow this video got thousands of views over the past couple of days. youtube be wild. idk where the traffic is coming from, but keep it coming. and subscribe for more lol

[@jumaltahti9478]

stupidmoto I wasnt really even intrested about this but the video was so satisfying :D

[@johnoven3668]

You might wanna wash the dirt off with water first scrubbing it can scratch the plastic, paint and metal

[@jonathantatler]

That CANNOT be the easiest way to clean the perforations out, a stiff brush and some gunk maybe?

[@MrMrWife]

Jonathan Tatler I don't even own a bike but I'd say try a pressure washer

[@TM-lw8wn]

yeh.....I dont drill out the holes, I soak mine in diesel for awhile and then hit it with a wire brush for about 30 seconds before repacking. Someone else said they hit it with a propane torch, gonna try that next time, sounds faster and cleaner than my diesel.

[@montanabraaapster8222]

whats the drill for cletaning the holes?

[@GTsGarage]

A really well put together video.. nicely done.

[@4CIdaho]

May the smoke be with you.

[@AdolfHitler-sr4vm]

I only like two strokes because they are way better and the smoke and smell

[@vicepeponcealonso9244]

Gehry wtcs

[@cheikhgueye8847]

4CIdaho Lkikkkkkkkpppppppppppppppppppojhgjghhhi

[@dasrusse1030]

Wait... Its not really a big deal if i get water into the exhaust, right?

[@lancairw867]

DasRusse on a dirty bike yes. The water will ruin the packing therefore lose power and become really loud. Could also get into the motor and cause rust. I always use a plug.

[@DeseretRider]

Wrapped with a fiberglass blanket-----which doesn't seem to add much 'quietness' to the exhaust and the blanket retains unburned oil until it is soaked----I do mine differently which leaves it quieter and lighter ----but I don't know how to do video's so you all will probably never know how this old pro does it.

[@brizzmoto6229]

Lynn Thomas How about you tell us what the secret is then : )

[@QISBC]

I second that. Out with the secret lol

[@Sahkopekka200]

You could probably burn the carbon away from the inside tube with the little holes?

[@hvguy]

burn carbon? not possible lol

[@Sahkopekka200]

Hvguy ? ehm no, You can do it. thats how you clean the inside of exhaust pipes...

[@lobotomyy]

SamD thats called oil not carbon

[@berteka92]

Is bad wool the reason the oil was leaking from exhaush?

[@kajsdbbdbdbd4268]

BerteKa yea

[@DiDoSvK]

nice vid, but you didn't show us the most important thing :D

[@Scoolio1]

DiDoSvK repacking?

[@rieskapoika1631]

jonnen elämä ok

[@niilo-xh3he]

Rieska Poika ok

[@kedrshr1mp6]

Pers aukko ok

[@heavymetal375]

Basil ok

[@EthanLyde]

Any advice for cleaning with a solevent?

[@keithcastleberry3993]

Was hoping to see how you wrapped with packing. Tight? Loose? I use a propane torch to burn that caked oil off perforated tube. Dont get too hot and be a bit patient. Took about 15 min.

[@edgardarevalo2388]

Amo ese sonido del 2t❤

[@mxlura1]

Why don’t you post anymore

[@jdm91hatch]

Put less packing in for cooler sound and more power

[@josef2102]

Not true

[@2000TA]

Should have washed the rest of the bike while you had it opened up.

[@danielbargas3377]

Or you could be like me the guy who rips the packing out when it's fucked and never replaces it

[@6.4_swervo]

I would use high heat silicone.

[@stupidmoto]

You don't need it. 2 stroke silencers don't get hot and the black rtv silicone I used is good to 500 degrees, but more importantly its oil resistant

[@rikyglande4088]

1:24 dude u can use an oxidric flame. I dont know how to spell because im italian sorry.

[@pschdlc7912]

are you using high tempetature silicone for that seal?

[@stupidmoto]

no, you don't need the orange high temp stuff. silencers on 2 stokes don't get over a 100 degrees or so. It is important you use silicone that is oil resistant though, which the black RTV silicone that I used is, and its also good to 500 degrees

[@crazycraigy01]

Missing a jubilee clip..

[@jesseallen8246]

Was u cleaning the holes out?

[@joshguitar7206]

jesse allen yes

[@jesseallen8246]

Josh Guitar81 why not take a wire brush and brush it

[@jesseallen8246]

Josh Guitar81 or even a tooth pick or something

[@PoorCoyotee]

How the change the wool = you don't.

[@nordicalpha1376]

Poor Coyote he did

[@LuisBermudez69]

You don't wash a byke or something that way

[@thelank5892]

At this rate you might as well buy new pipe every season

[@Ghost_MuddyGang]

Bro ever heard of contact cleaner 😂😂😂

[@leocasi405]

how often does this needs to be ?

[@lancairw867]

Leo Casi 10-20 hours

[@Wheelie_]

Very Nice Video !!!

[@peytonmcadams7562]

Hey man, what's the black stuff you used to seal the silencer back up?

[@stupidmoto]

Its Permatex Ultra Black RTV silicone

[@robhayter484]

Blow torch the silencer, will get all the carbon out so much easily

[@DarkCore122]

0:49 it sounds like darude sandstorm :D

[@jdm91hatch]

ahahehe lmao so dumb

[@danny_keet1194]

Who wants a silent two stroke

[@angus_m]

you should use a 2 stroke plug not a 4 stroke plug

[@randomguy93984]

Angus McLay what does it matter, i usually just stuff a towel in it if i'm really washin it

[@angus_m]

yeah but they get so full of oil and the water proofing not the best

[@Geopolitica1946]

i often does this have to be done?

[@MrAndyS]

Sounds like it's only running on 1 cylinder

[@stupidmoto]

you're goddamn right

[@isak338]

Naahhahhaah brooooo titts a fugen inline 4 jsjahahahfjdjdkflglc

[@doudova_p]

*Nice vid, I subcribe you now 😉😃*

[@ciromontenegro5053]

Cio😎

[@rickt66]

nice video but ur premix is way too rich ur running oil out of the tail pipe and ur loosing hp

[@stupidmoto]

its amsoil dominator mixed at 50:1, so the premix is fine. Jetting is probably slightly too rich

[@linushforsberg8385]

It is never (pretty much) the premix, it is the jetting. Good quality oil at 32:1- 50:1 is the way to go.

[@thejohn6614]

Linus H Forsberg i have oil coming from my exhaust. I just bought the bike. I was told that it has to be repacked. I said it seems to me like it would be running too rich if a fair amount of oil is dripping from the exhaust. Can you guys please give me some info. Thanks.

[@nuclearizato]

fantastic video!

[@tyangcilik]

Amazing

[@snanboss3602]

ستمر

[@sendaroxbg4181]

rm 250 ?

[@stupidmoto]

yes

[@sendaroxbg4181]

and I drive Suzuki rm 250 and I am from Bulgaria

[@sendaroxbg4181]

on my bike is fmf powercore 2

[@uknodebo3092]

Now that some adderall bro. OCD much

[@warriorqc1334]

Nice vid, tantk you for dise !!

[@MotorstudioItalia]

Sempre bello cambiare la lana di roccia😂👍🏻

[@topnotchgang759]

You guys need to get a dirt bike to understand

[@pitbikemirek2811]

Nice video

[@ksmith56]

Could of took a pressure washer to it

[@joseeucardoosoriovalencian6027]

La próxima vez no uses el taladro y la broca usa un cepillo de cerdas metálicas, en 10 minutos lo dejas impecable.

[@satriaekatamasatria7768]

opo kuwi klx opo ktm

[@jeffholt8433]

4 stroke it is then

[@jackwistrand4847]

Clean bike bro

[@ua7217]

Jack Wistrand thanks bro i work hard to keep ot clean

[@geauxsipp2757]

This video is funny😂😂😂😂

[@streetboys2821]

Idk ab you guys but there is nothing more annoying than speaking the gunk off a 2 stroke exhaust

[@anthonyw1380]

nice video

[@joshguitar7206]

U could just get a air compressor instead of the drill

[@mxlura1]

Can you post more pleas e

[@lucashadad5498]

Rm is awesome

[@obedm.6627]

Hahaha I love this video

[@Happygrowercbris420]

Could have used a solvent 🤷🏽‍♂️

[@EthanLyde]

Like what?

[@StarsWithScars]

so ein dulli.. er hätte statt nen akkuschrauber auch ne drahtbürste und nen kompressor nehmen können..

[@robertmahaney6831]

Too bad KZbin doesn't have a content quality policy.

[@leecoomber3877]

Much faster ,wire brush inside and out. Simples. 🤪

[@matvey1896]

Детэйлинг прям

[@krisonras526]

POUYOYYGEI THE HECK YOU 😉 DON'T KNOW 🙏 😘♥️ HD

[@andersbuljo1756]

Who heard sksksks when he was sparing

[@justso1823]

why are americans so hooked up on carbon build up

[@dustinshort6207]

skippy 1 I'm not, the more carbon there is, the louder it is!

[@KTMatt]

skippy 1 he's about to send it, you wouldn't understand.

[@captainwin6333]

Just buy a new one and throw the old one in the bin.

[@dirtmoto2780]

Captain Win and waste $100 no thank you

[@chronos_vnc]

howtobasic

[@nhipham9045]

Hello

[@Happygrowercbris420]

Are you fucking kidding me

[@almasnassiry6345]

THATS MUD HAAHA Like if you get the joke

[@gilanggarage7111]

ngomong ae ganti glasswool

[@johndosh2469]

Sub

[@g.amirthavalli9844]

Ktm

[@rizalriderkids8728]

raumum

[@sue-geneleonora4940]

K

[@tracysayer9443]

Tm

[@كنوعهكنوعه]

n

[@angelopinelli4450]

Horrible

[@raulahernandez5128]

Es una mamada querer limpiar el escape yo creo has de ser mujercita

[@jadenr.11]

1st comment

[@ItzMurphhh]

ur fired

[@kimmadsen4893]

Jaden Rosenberg no shit