2 Tips to EASILY Remove a C5 Corvette Steering Wheel!! - Revesol Wheel Install

[@Addimotive]

Use the discount code “Hnat10” for 10% off your Revesol wheel!!

[@lucadimarco2087]

is it possible to install the steering wheel off center??

[@Addimotive]

@@lucadimarco2087 Based on what I saw, there is a key way on the spline for the shaft and wheel hub, so it should only go on one way

[@richardsalmen]

I don’t often comment on videos, but this one was particularly helpful. I just ordered a carbon fiber steering wheel from Overtakeauto for my 2004 C5 Corvette. Following the steps in this video made for an easy project and I was done in just over an hour start to finish. I did NOT need to use WD-40 on the splines as the wheel came right off with the puller I rented from O’Reillys. Thank you for taking the time and effort to make and post this video!

[@Naginc]

Bro pro tip...Just use a cigar flame lighter or a lighter torch. When I replace these I just heat it for maybe 30 seconds the metal expands and then cools and it comes off easily. Great video.

[@c5grapeape]

Great tutorial on the issues with the C5 steering wheels. Mine didnt want to budge at all and I wound up taking it to my body shop guy. He had it for another couple days before he was able to make it break loose. He wound up drilling and tapping the wheel to use bolts and not the J-hooks. Mine was a nightmare. Glad you were able to get yours by yourself. I've never in all my years of wrenching had one this bad. 😎👍

[@dtaylor224]

Thank You mine came today and thanks for the discount 😎

[@Addimotive]

Awesome! Thanks for watching and supporting the channel!

[@navarra_rs5_]

did everything you did and mine would not come off, the steering wheel removal tool stripped its threads from tightening it so much. saw a comment about using a cigar torch lighter, might try that

[@Addimotive]

Dang thats a bummer! Sorry to hear it’s so stuck. Heat is a good option for getting things to unbind, just be careful you don’t melt any of the surrounding plastic parts (clock spring). Also, did you let the penetrating oil sit and soak for at least like 12 hours?

[@loldhanu1]

Thanks a bunch dude, pulled it off with no trouble thanks to your diy. Definitely suggest drenching the bolt with wd40. When it came loose I found wd40 in the threads so assuming it played a good part 🤷🏼‍♂️

[@loldhanu1]

Took me 2h total to remove the airbag and wheel, also filmed it and watched your vid 😅 every now and then.

[@Addimotive]

Glad the video helped and you were able to get it off! That's a big reason why I make them, to help others!

[@Addimotive]

Glad the video helped and you were able to get it off! That's a big reason why I make them, to help others!

[@yesterdayz]

another great video, keep up the good work!

[@Addimotive]

Thanks Mike! Happy Thanksgiving.

[@lucadimarco2087]

@@Addimotiveso is it not possible to put the steering wheel off center? I just upgraded my steering wheel and went for a ride and is off center

[@ricktaylor27]

I would put anti seize on the splines

[@Yuillster]

Thanks for the video! Does the glass roof panel come out of your vehicle? I would add the recommendation to remove it if possible during the seat installation if possible. Thanks again🤟🏽

[@Addimotive]

Of course, thanks for watching! And yes, I would totally agree with you there. Taking out the roof panel will definitely help maneuvering the old seats out and the new ones into place.

[@lanebarker297]

Factory lock tight on the splines

[@Addimotive]

lol really? I never saw any residue that looked like old loctite on the splines. Why on earth would they put loctite on the splines? I understand the steering shaft threads, but splines aren’t meant or needed to have loctite. Unless that was meant to fill the gap of any tolerance slop between the male and female portion of the splines.

[@PDudz]

Can you please provide a link/description of the steering wheel puller? Thanks!

[@Addimotive]

Yea! Here you go. Performance Tool W80651 Steering... www.amazon.com/dp/B000N37EFS?ref=ppx_pop_mob_ap_share

[@lucadimarco2087]

@Addimotive is it possible to install the steering wheel off center??

[@Addimotive]

Based on what I saw, there is a key way on the spline for the shaft and wheel hub, so it should only go on one way

[@lucadimarco2087]

@@Addimotive hopefully my alignment fix it tomorrow cause I mounted mine before watching your video and now it’s off center but before with the old stock steering wheel it was fine :/ I tried pulling the steering wheel off again but now won’t come out cause the j hooks shaved of some portion of the holes where you pull making not enough contact now

[@Addimotive]

@@lucadimarco2087 hm that’s weird. Yea take a look at your stock wheel you took off. There should be a keyway on the internal splines that allows the wheel to only go on the shaft in one position. Unless there were variations in shaft/wheel hub design over the years. My car is a 2001.

[@ty_the_guy951]

Question was your airbag/ horn a little loose when you were done? It seems like mine has touch more of play.

[@Addimotive]

I didn’t notice anything different from before I removed it. Do the two bolts need a little extra tightening? Actually, did you replace those little rubber nipple things onto your new wheel? I believe those help provide a soft surface for the wheel to mate up against so it’s not metal on metal that will chatter or vibrate.

[@ty_the_guy951]

@@Addimotive I forgot all about those! Thank you sir

[@Addimotive]

@@ty_the_guy951 no problem!

[@c5.0h]

Hey I’m trying to replace my c5 inner fender & just finished your rebuild videos I was hoping to buy your 3D printed fender spacers are they still available??

[@Addimotive]

Hey! Thanks for reaching out! I had to take a little break from making 3D printed parts on my Etsy store (we had a new addition to our family) but I do plan on getting them back up for sale in the coming weeks. Is there a time you specifically need them by to finish your fender repair?

[@Addimotive]

I’m also changing the material I use to 3D print parts like this so they’re much more robust.

[@Chadmdobson]

I tried that discount code and it’s not working, do you have a new one?

[@Addimotive]

Are you sure you’ve spelled it right? Hnat10 If it’s still not working, I’ll reach out to my contact at Revesol

[@Chadmdobson]

@@Addimotive I was trying to buy through their eBay shop and it didn’t work there but it worked on their website.

[@Addimotive]

@@Chadmdobson ah I see! Okay good to know, glad you got it to work. Did you get a wheel for a C5 also, or another car?

[@shredandenjoy7311]

So if you're just tossing the steering wheel out, you bust out a cutting wheel and just cut open the sections you need to access those bolts pretty easily. 10 minutes instead of an hour!

[@Addimotive]

Yes I guess that’s one way to go about it. Except it’s a lot messier and that’s a lot of vibration you’re sending through the column and interfacing components if you use a sawzall.