What project have you used this stapler on? How did it perform and would you recommend it?
@Joorles Жыл бұрын
Powerful message.. I work on a trauma unit and it’s true. Certain injuries or health issues that makes individuals unable to tend to their activity daily living is hard. Your health is your wealth, and there’s great tools out there that are a solution. Great review and message. You gained a subscriber!
@woodpecked3D3 жыл бұрын
this is what a real review looks like.. thank you
@mikekrzesowiak79443 жыл бұрын
Thanks, I'm glad you found it helpful 🙂
@tj14682 жыл бұрын
Well I am 110 years old and I currently have my stapler in my coffin and I am working on reupholstering the interior. In all seriousness thanks for the to the point video. You articulate very well without dragging it on.
@mikekrzesowiak79442 жыл бұрын
I’m glad you found it helpful! Good luck on your project
@djjinerson2 жыл бұрын
Man what you said at the end is so true…..I’m a diy’er and love to build. I can be dead tired from my office job, but come home and spend all nite in my garage, somehow I get this burst of energy I did not have earlier in the day. However lately I’ve been having an issue with my arm, possibly tendinitis. Still need to get checked out if it doesn’t resolve itself, and what scares me is not being able to do what I love. Nice review and wise words spoken, I did just order this.
@davemz9993 жыл бұрын
Awesome review! And I'm going to start foil taping my ducks. lol
@mikekrzesowiak79443 жыл бұрын
Haha 😂
@premierremodelingsolutions82292 жыл бұрын
Thanks for your video! we just picked this guy up for a patina copper bar top we made out of 5 gauge copper and it held the hem nice on the under side of the overhang. We have also used it for a screened in porch, roofing underlayment where under an overhang and various other odds and ends.
@mikekrzesowiak79442 жыл бұрын
Awesome! That bar sounds like a cool project 👍🏼
@JeremyY2 жыл бұрын
Hey Mike thanks for putting this video together- do you think the M12 will be strong enough to staple plush carpeting into thick wood?
@mikekrzesowiak79442 жыл бұрын
Hi Jeremy! You're very welcome 👍 What kind of wood are you stapling into? Plywood?
@wildcard3942 Жыл бұрын
Isn’t that stapler best used for felt paper for roofing and papering for siding. Not for stapling metal.
@mikekrzesowiak794411 ай бұрын
Yes
@tomprovan506 ай бұрын
thank you
@mikekrzesowiak79446 ай бұрын
You’re welcome
@acidforblood Жыл бұрын
(Pets his new M12 Stapler like Mr. Bigglesworth)
@mikekrzesowiak7944 Жыл бұрын
😂😂👍🏼
@lordravencarver2422 жыл бұрын
Roofing it's pretty good at it
@georgesmith86442 жыл бұрын
How fast can it staple? I do a lot of upholstery in a fast paced setting. How quickly can you empty a full chamber?
@mikekrzesowiak79442 жыл бұрын
That’s a good question, I would say that it is not as fast as a pneumatic. I have a stapling project to do later this week and I’ll try to see how many staples I can fire in one minute and get back to you.
@georgesmith86442 жыл бұрын
@@mikekrzesowiak7944 yeah that would be great thanks, I don't expect it to be faster than a pneumatic but faster than a Rapid handheld would be great, especially if it's easier on the hand 😂
@mikekrzesowiak79442 жыл бұрын
I was able to do a sleeve of 75 staples in 43 seconds
@mikekrzesowiak79442 жыл бұрын
The best run I was able to do was 75 staples (a full sleeve) in 38 seconds. That's pretty much a rate of 2 staples per second.
@henrycruz45cal2 жыл бұрын
Great for stapling targets in a gun range
@mikekrzesowiak79442 жыл бұрын
Yes! This would work well for that 👍🏼
@felixmilburn45943 жыл бұрын
Have you used it with steel studs
@mikekrzesowiak79443 жыл бұрын
I have not
@debandmike3380 Жыл бұрын
I just bought this and its going back. the staples were inconsistent in their depth, and not one was ever flush with the surface, even with depth setting maxed out. Also, it is heavy when working overhead. I'll stick with the light and perfect Powershot. Every single staple is flush to the surface. This is the only Milwaukee tool I have returned. Not every tool is meant to be a power tool.
@danielcalona98223 жыл бұрын
🤔Well i use a traditional stapler but my boss buy 2 of those to use it with kitchen cabinets and they stop working after 30m of use 😕 and the traditional one we have to hammer down the staples 😕im still looking for one
@mikekrzesowiak79443 жыл бұрын
Bummer
@dhl41023 жыл бұрын
does it work for sub floor membrane ?
@mikekrzesowiak79443 жыл бұрын
I’d imagine it would
@user-zp5vt1tu6b2 жыл бұрын
Milwaukees Romex stapler is coming first half of 2022, it's going to be m12 but not fuel
@mikekrzesowiak79442 жыл бұрын
That’s awesome 👍🏻 I didn’t know that
@davidseguin22843 жыл бұрын
Who staples corner bead??
@mikekrzesowiak79443 жыл бұрын
haha! I've seen a couple drywall crews here in the midwest do it. Admittedly, screws have made more sense to me.
@davidseguin22843 жыл бұрын
@@mikekrzesowiak7944 those guys should be fired. However I just insulated a garage and put up 1200 square feet of poly, the milwaukee M12 crown stapler was just the tool for the job. Loved it
@Pro1er2 жыл бұрын
Staples are used for vinyl corner bead.
@ceejaybruce59772 жыл бұрын
What type of staples
@mikekrzesowiak79442 жыл бұрын
T50 staples
@SCOUSEBAMBAM5 ай бұрын
milwaukee do an electrical staple on same name as this just instead of bst its bcst
@mano24322 жыл бұрын
Crimple? Crumple + crimp, I'm guessing. Not a real word for what you're describing.
@CP-ok1gv3 жыл бұрын
So carpet padding but NOT carpet
@mikekrzesowiak79443 жыл бұрын
Ha, yes. Carpet padding, I have not tried it on carpet.
@leovargas70452 жыл бұрын
Show the product ,you guys talk to much.
@mikekrzesowiak79442 жыл бұрын
Hi Leo, if want you see more product check out the unboxing video