$20 Jeep Wrangler DIY Accessory!! - Badge Glow

[@adventuredex]

Thanks for watching this video! I had a a lot of fun installing these easy Badge Glow & emblems! #jeepwave

[@coloradogrownHD]

Where did you get those rough country badges from.?? You got a link?

[@timschacht6016]

COlorado Grown life

[@vegasfordguy]

I honestly think the decals looked a lot cleaner vs the badges.

[@roneckler6235]

I actually saw these on a Jeep facebook club, but watching your video on it is what sold me on them. Reason being, you hooked them to your turn signals, making them actually a functional thing. I have badges on both sides of my JKU, so I ordered two amber ones and hooking them to my turn signals, I will have the added turn signals for people beside me. Great added safety function. Thank you.

[@roneckler6235]

Oh, actually I see you hooked them onto the fender marker, but you could probably hook them to your turn signals, correct?

[@roneckler6235]

No replies? Is this video too old for a reply?

[@robchurchill1368]

You totally remind me of my best bud, but he's not a Jeeper. I LOVE YOUR VIDEOS because you love your Jeep as much as I do MINE. Thanks, DEX!!!!

[@adventuredex]

Thanks rob!

[@TheCooldrummerchic]

I love how you are so enthusiastic! I wish you would get a Jeep Trailhawk and do some detailed mods on that!!! ;-)

[@rafaelrivera4936]

the little details that make a big difference. very cool OIIIO

[@adventuredex]

That is a great saying!! Totally Agree!!

[@Babyrocko1908]

I wish you would have shown video of how you actually fished and wired the wire to the side marker.

[@Coyote-Baba-Yaga]

I wish you would have showed a little bit more detail how you connected the power through your blinker so I know how to do it exactly by myself

[@adventuredex]

I just used some splice clips. Super easy!

[@brandonx7886]

Did it hurt anyone else to see the drill going in the jeep.. made my stomach turn.. felt huge relief seeing that it didnt slip and went well

[@Glowingraver]

I took a 4 inch hole saw to mine so no

[@s1lkysl1m83]

gotta do what you gotta do

[@jonathanweston2448]

Gentle punch does the trick to make a pilot dot for the drill.

[@michaeldiaz824]

This was great. Something we can all afford to do. Thank you. Really!

[@marcgrabowski9533]

Would have been nice to see during 5:53 - 6:10, the process of wiring the badge wire to the headlights. Video is missing a very important part. Where/How did you connect it? What do you mean by "this marker"?

[@adventuredex]

Simple, just use a splice clip and connect it to any power source you want. Thanks for watching

[@burntsyder]

Marker light...

[@jesusjeepsjava3987]

Thank you again for getting back to me on the Badge Glow, I ordered 2 amber! Can't wait to get them set up and looking forward to doing some amazingness with you!! :)

[@4mzamudio]

OMG I LOVE IT!! I LOVE TO LIGHT UP MY JEEP!!

[@MrFatty239]

Nice vid Dex, thanks...get the Rugged Ridge Hurricane Flares. I just installed them and they are awesome. They look rugged and would look great on your Jeep.

[@adventuredex]

Thanks for the suggestion! I will look into them!! #jeepwave

[@Jeep79]

Nice dex I like the glow lux pretty cool

[@adventuredex]

Thanks Yaniel!

[@paulburgio9112]

Thanks for all of your videos! Your video on the Rough Country light controller sold me on it. And your install video was even more helpful than the instructions provided with the kit! Keep it up!

[@jimnazium8946]

Very cool LED backlighting... I would of suggested taping the wire with electrical tape, or a heat shrink to protect the wiring from shorting within the pilot hole you drilled. And, I would of applied some primer paint on the inside and outside of the pilot hole to prevent the bare metal from rusting. Just saying.

[@adventuredex]

Thanks for the suggestion!

[@davidbarfield3489]

Great video bro. I'm getting my first Jeep this weekend!

[@tommywhy5297]

Yo Dex you got a badass Jeep bro

[@adventuredex]

Thanks Tommy!

[@bryanz7325]

Maybe test that light up keep logo to make sure it works befor drilling a Hole in your jeep

[@MrTroch22]

Nice Dex, i like it... I just might add that badge glow to my jeep. I give this video 4 out of 5 BRO HANDS!!!!

[@adventuredex]

LOL thanks man!!

[@studaddysh]

Awesome video. I enjoy your channel and all your content. Cheers!

[@adventuredex]

I appreciate the feedback! Thanks for watching!!

[@jakerusty123]

you could also just heat up the stickers with a hairdryer and they would peel right off. no residue

[@hellfighter1108]

Realize this is a few years old, but where can I get that awesome Rough Country Off-Road Emblem for my Rubicon???

[@davidmorad4405]

Thanks for all the handy tips!

[@adventuredex]

Anytime!

[@jlopes68]

Nifty lil led, looked good.

[@adventuredex]

Thanks for watching!

[@JbensonLIVE]

Nice man, just went to get the glows for my jeep and almost all are sold out except purple lol and that won’t flow. Can’t wait till I can get some!

[@adventuredex]

Absolutely man! Thanks for watching!

[@ACA7381AJ]

Thanks for the info and how to install it!

[@adventuredex]

+ACA JEEP Anytime bro!!

[@nyc5413]

ITS so Cool. I am trying to find the Rough Country OFF-ROAD Badge...Could you please let me know where I can find those badge? thanks a lot!

[@IWILLCHARGEYOU]

Thinking about getting a jl. Wanna do all the upgrades and mods myself...

[@adventuredex]

You should!! Go for it!!

[@willwhittington9546]

Does it shine through the badge at all? It seems like it just kinda lights up behind the badge so at night when it’s on it’s just a light on the side. It’d be nice if it shone through so you could read the badge at night, nice video though

[@adventuredex]

Correct, it only shines around the badge not through. Cool idea tho! Maybe 2.0 lol Thanks for watching!

[@austinclark1997]

4 years later.. how did it hold up? If still installed. Any suggestions or tips

[@dannyestrada4684]

Where did you get the American decals for the side windows looks dope ? It’s not in this video but i notice on other videos

[@TJ-rx4zl]

“Badges? Badges? We don’t need no stinkin badges..!”

[@sniperfpv]

I'm trying to figure out where i can get some of these badges for my jeep.

[@adventuredex]

Check the link in the description. Thanks for watching

[@sniperfpv]

I got those ones. How did you get the specialties. Like I want smittybilt, Rubicon Express etc

[@jimispeed96]

Have you ever seen a Godzilla jeep decal?

[@adventuredex]

No what’s that??

[@jimispeed96]

@@adventuredex I was just asking if you've ever seen a Godzilla decal . I'm a big Godzilla fan and thought it would be cool to have one to slap on the side of my jeep. I thought you may have come across one before and would be able to give me a website to look at.

[@walterumana811]

It would have been a good idea for you to use a sleeve on the wires at the point were you drilled because the vibration Might cut through the Plastic coating of the wire and you're gonna have a short circuit

[@adventuredex]

That’s a good idea! Thanks for the suggestion!

[@JasonDavis-ii1pc]

Or you can fill the hole with silicone and this will also aid on keeping the hole from rusting.

[@RhodeIslandDude]

Where would I go to buy different kinds of badges for my jeep? I have a 2019 jeep Cherokee Limited.

[@COMEMOTIVATEME]

I need that last decal!🤣

[@adventuredex]

Haha Link in bio!!

[@mattmiller1078]

Man I wish RC sold those emblems. But evidently they are available to only dealers who install the lifts.

[@adventuredex]

Yeah, I had to pull some strings to even get one LOL

[@nononsense7615]

I just like this guy. Lol

[@adventuredex]

Thanks! I like you too!

[@805edog]

The idea is cool but only half way there. They need to create a translucent badge so the entire emblem is lit up.

[@adventuredex]

That’s a cool idea. Thanks for watching

[@kingair350]

Lemon extract oil works better on the glue.

[@gary5831]

might i suggest grommet for those wires

[@adventuredex]

Great suggestion but I couldnt find a small enough one to fit! Thanks for watching!

[@kdjwolf]

It looks like you ran the wire through the fender without a rubber grommet. Hope you don't get a short.

[@adventuredex]

+Kevin Javorsky Rubber grommet is a good idea. The wires are covers as well so it is unlikely they would short. Thanks for watching!

[@rafaelfelix2114]

Hey great video. where can I get that rough country emblem and do you know of a place you can make a custom one as well?

[@adventuredex]

Thanks for the comment! The RC emblem are not for sale... I had to ask RC for a favor to get one lol

[@rafaelfelix2114]

Man that sucks but thanks for reply. they should sell them looks awesome. On another note do you have a video of how to install soft top to jeep?

[@MrDstegner119]

Very cool little add on thanks OlllllO

[@dudelivestrong]

Theme of the Jeep. Red and black. White Jeep.

[@adventuredex]

LOL thanks for the correction! :p

[@COMEMOTIVATEME]

Nice! Awesome video dex!

[@adventuredex]

Thanks bro!

[@klondike091586]

Need more badge!

[@adventuredex]

Haha! Thanks for watching

[@penderpartyof2700]

M3 tape? Never heard of it. Heard of 3M tape.

[@adventuredex]

LOL I get it :p

[@shopofeverythingnow3965]

Do you put that on both sides or just the driver side?

[@adventuredex]

Both but just for fun!

[@diver362]

Nice video write up Dex! Quick question, if you had to test an LED light bar, such as the 20” one you have. How can I just test to see the brightness without actually hooking it up to a car. Would a direct battery connection to the power leads of the LED bar, work to temporarily see the brightness? Thanks!

[@adventuredex]

+diver362 9V battery is the pro tip 😜😜

[@onlyacowboy]

yes ..red to positive & black to negative

[@salvadorperez3889]

Nice video dex

[@adventuredex]

+Salvador Perez Thanks!! 🤙🏼

[@thiagocoelho4537]

Just got a Rubicon ...beautiful...but I want to do lots work on it......once u start is hard to stop. Lol

[@adventuredex]

Definitely! Thanks for watching!

[@jodylane5022]

is the wiring to ur headlight red and black, if not what color wire to ur headlight was the hot

[@Ele3mntNova]

Great vid! Where did you get the rough country badge?

[@adventuredex]

+Jackson Davis Thanks man! I had to pull some strings!!

[@xbpbat21x]

Nice jeep, very clean...do your adventures include trips to the mall and soccer practice?

[@BobMillerHome]

lol

[@647live]

Aaaw “20 subscribers” made a joke

[@xbpbat21x]

@@647live When it's subscribers that justifies your existence...🤣

[@tedohio3038]

Do you think that the badge glow would fit on the cover plate you put on when you relocate your factory rear license plate ?

[@adventuredex]

It is a different shape so I don’t think it would fit. Thanks for watching

[@DL2045]

Im a yj guy but doesnt that light blink on the fender flare marker when you turn your blinker on?

[@adventuredex]

No the fender lights are just markers. They don't blink. Thanks for watching!

[@Thehowardhaeg]

Very nice!

[@adventuredex]

+TheDenverJK Thank you

[@bonzynguyen8465]

Thanks for the handy tips,awesome video Dex👍. Where can I get that 1941 decal.(in red)

[@adventuredex]

Thanks! I got mine from amazon

[@bonzynguyen8465]

@@adventuredex thanks so much Dex👍

[@007cheburashka]

Night shot bro!

[@adventuredex]

Thanks!

[@UncleFjester]

I just installed my "Mall Rated" Badge!

[@darinamims949]

How can I get the trailrated in Blue and black?

[@jonathanweston2448]

Ooooooh I like!!!

[@jamesmckee5716]

I bought one after watching your video. Did you use a 12v inline fuse for the lead wire? Did you have any issues mixing wire gauges?

[@adventuredex]

Thanks for watching. No issues mixing wires assuming they are very close in size. I didn’t run a fuse, I just tapped into the power from the headlight. Thanks for watching!

[@jamesmckee5716]

AdventureDex thank you Sir...

[@AshleyBrookeHarris]

When you connected the badge glow, does it light up when you turn on the turn signal as well? Or only when you turn on the headlights? Thank you!

[@blakkkatt9]

Hey I need a under hood fuse relay (extra) I have the left pillar and a over head switch controls for my accessories but I can't hook this up together unless I have this box any advice

[@adventuredex]

+blakkkatt9 why can’t you connect it direct to your source?

[@06ckirby]

Where did you get that rough country badge?

[@theshatzer885]

How cool is that?

[@adventuredex]

+The Shatzer Very! Thanks for watching

[@antmarasco]

How do you wire the badge glow to the head lights so the badge glow comes on when the head lights turn on??

[@adventuredex]

+Anthony Marasco Simple, just Connect the wires from the badge glow to the wires in the headlights. Positive to positive negative to negative. Thanks for watching

[@melosanti150]

I want to know where I can find the lights

[@adventuredex]

A company call Badge Glow makes them!

[@monkeypr784]

Where I can get the roughy country badge?

[@Ro3Go]

What glue or sticky paste did you use to stick the decals on? Or did you use the sticky stuff that came with the decals?

[@adventuredex]

It comes with 3m double sticky tape. All you do is peal and press. Thanks for watching!

[@Msleelee9487]

i like it !

[@adventuredex]

+MsLeelee94 Thanks!! 😃

[@thereisnopandemic]

Doesn’t goo gone remove paint?

[@KingsDisasterGarage]

Hey being that you hooked it up to your headlights is there any law that says you can’t run red lights on the street? I know here in Florida you get a ticket

[@TriggerHapySheep]

I believe its red headlights only, here in va if you have halos on your headlights like some jeepers do they cant be red or blue or you get a ticket lol

[@adventuredex]

You should always check your local laws, I plan on connecting it to my pillar switch pod once its hooked up. Thanks for watching!

[@adventuredex]

Not 100% sure but its always smart to check local laws. Thanks for watching!

[@AD-rx9cm]

KingsDisasterGarage I was thinking the same thing. I wonder can we hook it up anywhere else

[@AD-rx9cm]

KingsDisasterGarage maybe blue

[@Fortunatekings]

Dope!

[@adventuredex]

I appreciate it!!

[@DrakeHawkins]

Where'd you get that double pod light bracket?

[@geofspear9546]

Any Adventure Dex badges for our Jeeps?

[@jccharly2000]

Sorry for rookie question, why do people name their jeeps? As in give jeeps a name or nickname. Thx

[@adventuredex]

Haha I guess its the same reason why people name anything they love... Their favorite baseball bat, favorite tools, etc. When your passion about something you give it a name so you can connect with it :p Thanks for watching!

[@Calafi777]

because there on drugs

[@g.t.b.7779]

Geep Geep Where on drugs??

[@Steve-ec6ed]

Do those come in only red or do they offr other colors?

[@sm6wet]

Really like that glowing trail rated. Hey man, what do you do with your tires to make them look so black and shiny? You should post a video about that. Impressive. Cheers from Sweden

[@adventuredex]

Thanks a lot! I use a regular tire shine.

[@bernardhairion9927]

Très beaux

[@A_World_Full_of_Lies]

Nice!

[@adventuredex]

Thanks!

[@melosanti150]

Where I can find the badge glow for the Jeep Wrangler I can find that

[@nickpowell6886]

For the Badge Glow Emblem did you have to buy a separate extension wire or did it come with it?

[@adventuredex]

I extended the wire myself. I used 14 gauge wire. Thanks for watching!

[@nickpowell6886]

can you send me the link to the wire?

[@Officialshayne]

Good Stuff!!

[@adventuredex]

Thanks!!

[@lisamangano138]

Where do you get an extra extension wire from? I’m new to the Jeep community help

[@adventuredex]

Any 14-16G wire will work! Thanks for watching

[@TimBucktooy]

How does the red look with the original badge?

[@adventuredex]

+Tim Bucktwo Looks awesome! Thanks for watching

[@kenroybernard2978]

where can I get a steering wheel knob that will fit a 2017 wrangler?

[@adventuredex]

What do you mean by steering wheel knob?

[@kenroybernard2978]

A knob spinner that goes on your steering. everyone I've tried doesn't fit the steering wheel size.

[@austinhamsher5584]

Which wire is used to light up with clearance lights?

[@adventuredex]

what do you mean clearance lights?

[@austinhamsher5584]

The side markers. I want the badge glow to turn on when the yellow side lights are on. Thanks!

[@adventuredex]

You can tie them directly into the side makers. Just use splice clips.

[@dennislayug6169]

Where can I order the trail rated badge glo?

[@jakobbrown6641]

@adventuredex what exhaust are you using?

[@craenorris6232]

How did you get all the badges from the company?

[@adventuredex]

Contact them and make your order. Thanks

[@tarekhatoum7210]

wow👍👌👌👌👍 I like it 😎👍👍

[@adventuredex]

Thank you!!

[@richardpacheco5877]

Has anyone found where the led badge glow is sold?????

[@adventuredex]

Check the link in the description!

[@blakkkatt9]

Oh by the way I have the apollointech systems.

[@adventuredex]

+blakkkatt9 Connect it directly to your source....

[@blakkkatt9]

AdventureDex , well it two separate boxes and I thought you get a hook each box up to a fuse but there's only one fuse for one of them so I was told that I needed to separate fuses slots

[@adventuredex]

+blakkkatt9 Connect both boxes to one fuse and add a bigger fuse amperage. Hope that helps

[@LegendaryPrince777]

Where can I get rough country badge

[@adventuredex]

Apparently they are exclusive to Jeeps that were bought from RC. I had to beg for it LOL

[@LegendaryPrince777]

AdventureDex if anything try to get me a set bro please. I'll pay you through PayPal. I fell in love with those RC EMBLEMS

[@adventuredex]

I wish I could!!!

[@Calafi777]

amazon 13 bucks canadien