20 seconds window calibration Volvo S60 V70 XC70 XC90 2001-2009

[@Peppermint1]

For newer cars, if the auto-down at 1:00 doesn't work, try these other procedures: 1. Instead of auto-down, try manual down all the way, then manual up all the way, then try again auto-down. 2. Instead of auto-down, do manual up all the way, then hold auto up for 10 seconds, then see if the calibration did succeed. VIDA procedure - Select DIAGNOSTICS tab - Select VEHICLE COMMUNICATION sub-tab - Click on DDM or PDM module on the vehicle graphic (PDM=Passenger Door Module, DDM=Driver Door Module) - Under the vehicle graphic, click Advanced > DDM > Initializing the window position - Click the VCT2000 image to execute the script

[@razharel]

Thank you. Worked like a charm on my 2009 volvo s60

[@lsmith1130]

Thank you so much just used this and worked perfectly

[@Peppermint1]

Welcome

[@rjeffp4767]

This did not work for me. But this guy’s other, longer, video did the trick

[@tempestdrums7152]

When i pull the fuse (door module LH) while the LH front window is moving on my 07 V70II, the window does NOT stop... same on the passenger side. any ideas?

[@VidiSLTU]

Not works for my P1 Volvo..

[@kokugunso]

For my 2007 S60, I follow your video, then manual up all the way, hold auto up for 10 seconds and then it is calibrated. Holding down didn't work for me.

[@Peppermint1]

Much appreciated. I've added this in the comment pinned with alternate procedure for newer cars

[@michaelvd2467]

Thank you very much! Do you happen to know what is wrong with my driver side window? Automatic up/down isn't working anymore at all, and before the window wants to go down manually using the button I have to pull the button up first.. somtimes I even have to press the button down like 5 times before it wants to start moving. I am suspecting there is something wrong with the button since sometimes when I push the button down I dont even hear the window motor try to push it down

[@michaelvd2467]

Seems like I fixed it (sort of) by repeatedly pushing and pulling the button harder than I usually would, guess doing that got some dust and other debris out of there. I still have to press it 2 or 3 times sometimes before it wants to go down. Maybe Ill open up the control module one day but for now: not going to touch it since it kind of works :)

[@Peppermint1]

Try to replace the door module. Better to get a used one from the same year, if the software version is the same, it will work plug&play . These modules do go bad especially when the door (or window) stays open in the rain : water gets inside the module and damages it.

[@michaelvd2467]

@@Peppermint1 thank you man, Ill see what I can find at the junkyard

[@SEGAIZCHEBA]

Где коврик на панели брал?!

[@Peppermint1]

Ebay "volvo s60 dash cover suede" www.ebay.com/itm/Volvo-SUEDE-Dash-Cover-Custom-Fit-DashMat-SuedeMat-4-Colors-CoverCraft/251880803225?fits=Year%3A2001%7CModel%3AV70%7CMake%3AVolvo&hash=item3aa5440b99:g:FXIAAOSwpDdVBeH6

[@ianscottlewis]

This does not work for the 2009 xc70

[@Peppermint1]

For newer cars, if the auto-down doesn't work at 1:00, try manual down all the way, then manual up all the way, then try again auto-down