2000 7.3 Powerstroke Banks straight pipe exhaust

this is my 2000 ford powerstroke straight piped. the exhaust is a Banks 5 inch bellowed straight pipe custom routed. If you wanna see a video of all the stuff done to the truck let me know in the comments. like and subscribe!

[@rubenaguilar4314]

Do a video on it

[@tiktoktrends4098]

How does it sound making boost and going fast?

[@tiktoktrends4098]

And can you hear the turbo whine when it’s cold more?

[@fewminutestudio959]

It sounds AMAZING!!! It’s very loud and you can hear the turbo very well. I run about 35psi of boost with a tune so the turbo is screaming. It’s not as loud as a 6.0 turbo but sounds very good. As far as cold starts when I did this video I had just got home from school so it was hot. When it’s cold you can definitely hear it more. I have a high idle tune too so when you turn that on with the cold start the turbo sounds like a jet.

[@tiktoktrends4098]

Few Minute Studio ohh okay gotcha, and I’m assuming this is straight piped ? I have the same exhaust setup and really want to hear that turbo more!!

[@tiktoktrends4098]

And what about an intake? Do those make a difference when it comes to sound? I’m trying to make it sound somewhat like a 6.0 when it’s making boost. Like this for example kzbin.info/www/bejne/jpyYkGuaf6mDf9k

[@fewminutestudio959]

Hate to say it but that’s just not gonna happen. 6.0 have a VGT turbos. The 7.3 will just never sounds like a 6.0. The 7.3 will sound way better motor wise but turbo wise it just isn’t gonna sound like that. Now as far as exhaust I have a 5 inch exhaust all the way back and in the video that was a 6 inch tip but I now have a 9 inch tip and believe it or not the tip size makes a difference. It has a lower noise now with the 9 inch tip. And YES a intake will make a huge difference. Putting a intake on any supercharged or turboed car will make the turbo or supercharger louder. Get a 6637 cold air intake. There about $50 and are the best for these trucks. They are a plain white intake but they are massive and used in semi’s. Doing both of those will definitely help. Also take the metal wrapping off the charged pipes. This will make it louder too. And just paint the bare pipe to whatever color you want. You can also take the insulation off the bottom part of the hood and that makes a good difference too. Hope this helps!