2000 Silverado BBK throttle body upgrade!!!

Upgrading the Silverado’s throttle body with a BBK
www.oreillyaut...
www.oreillyaut...
Share, comment, like and Subscribe!!

[@garrettrodamaker1433]

I've heard to get the max hp and snappy response ya want is swapping the factory MAF sensor with a performance Granatelli one with this BBK TB to get maximum potential, plus a true dual exhaust, and tune.

[@macmade4953]

Do you recommend this upgrade ? Thanks

[@SilversStreetGarage]

It gave me a better throttle response so I recommend these kind of mods

[@josephhernandez1847]

How did you setup the coolant lines under the throttle body ?

[@SilversStreetGarage]

The new throttle body has the same coolant passages as the old one

[@293_lsxerik4]

I tried installing a 102 mm on a truck intake and the wire linkage wasn’t long enough how did you do it?

[@anthonya.3391]

How much it cost ?

[@BENSTACKIN365]

I installed a new BBK throttle body in my 2006 6.0 liter and it keeps going into limp mode(reduced engine power) frustrating to say the least. It has an EFI live tune. Any ideas on what could be wrong?

[@SilversStreetGarage]

Try a new maf sensor

[@BENSTACKIN365]

@SilversStreetGarage The MAF was brand new as well. Sounds like BBK has alot of issues with there throttle bodies.

[@dommybigshot21]

How’s it holding up, and do you got a 5.3 v8 ?

[@SilversStreetGarage]

It’s doin real good and yea it’s a 5.3

[@dommybigshot21]

@@SilversStreetGarage got a link ?

[@SilversStreetGarage]

It’s in the video description

[@robertfreeman5231]

have a question i have a 2005 silverado did the conversion two wire throttle body wanted two run a 102 mm throttlebody on my stock lm7 intake manifold an it be done with the stock intake manifolds

[@SilversStreetGarage]

Yes it can be done

[@Itsdazeni]

sweet. 150 hp gain right there baby lol. lmk how it works out in the long run

[@SilversStreetGarage]

It’s my brothers truck he said he felt the difference. He said he gets a quicker throttle response that’s goin to be the project truck for the channel real soon

[@Itsdazeni]

@@SilversStreetGarage badass bro that going to be awesome to see

[@osbaldoayala3128]

Was your truck stock bro?? Thinking of doing the same but my shii stock Lmaooo

[@SilversStreetGarage]

Yes it was stock

[@alijahthomas2803]

No tune needed?

[@slowhoe0087]

What is up with y’all people thinking y’all need a tune after every small upgrade

[@jeremycowger1175]

@@slowhoe0087cause what’s the point of installing it to not tune the vehicle to get just a lil more power out of it

[@slowhoe0087]

@@jeremycowger1175your getting little to no gain from a Throttle body why not wait till you have actual upgrades then get a tune lol

[@slowhoe0087]

@@jeremycowger1175also I’ve never heard of anyone getting a tune after getting a throttle body 😂

[@shaunbunch6503]

kinda pointless when your running stock intake not a cold air intake factory headers and no tune

[@adolforamos8405]

Where you got it at

[@SilversStreetGarage]

Oreillys

[@kocho_vlogs9923]

You got the link to it bro ?

[@SilversStreetGarage]

www.oreillyauto.com/detail/c/power-plus-series/bbk-performance-power-plus-series-throttle-body/bbk2/1709/v/a/3692/automotive-truck-2000-chevrolet-silverado-1500

[@SilversStreetGarage]

www.oreillyauto.com/detail/c/power-plus-series/bbk-performance-power-plus-series-throttle-body/bbk2/17090/v/a/3692/automotive-truck-2000-chevrolet-silverado-1500

[@SilversStreetGarage]

Those are the two options one is 80 mm the other one is 85mm throttle bore

[@kocho_vlogs9923]

@@SilversStreetGarage thanks bro 👍

[@marcus6470]

What’s the part number?

[@SilversStreetGarage]

www.oreillyauto.com/detail/c/power-plus-series/bbk-performance-power-plus-series-throttle-body/bbk2/17090/v/a/3692/automotive-truck-2000-chevrolet-silverado-1500