2001-2006 Toyota Camry Master Cylinder Replacement

[@aiazbekmustakov7773]

Changed all 4 calipers,breaks and rotors. Bleed them and still pedal to the metal. Looks like MC is needs to be replaced. Thank you so much for the video. Great step by step instructions. 👍👍👍

[@HomeownerRepair]

Thank you for watching our auto repair video that shows you how to replace the master cylinder on a Toyota Camry.

[@huanweili7699]

You would be a great automotive service technician instructor. You have great knowledge and teaching procedures.

[@HomeownerRepair]

Thanks for watching and also the great feedback.

[@Tithulta1]

Thank you for the refresher!! Haven’t done this in ages but gotta replace my daughter’s 2002 Camry’s master cylinder

[@HomeownerRepair]

Glad the video was helpful! Good luck with the repair.

[@scharles5454]

Thank you for being so thorough with the instruction and the camera work Excellent work. (Especially 'The Old Guy"). I hope my replacement will go as smoothly.

[@HomeownerRepair]

Glad it was helpful!

[@brassmule]

Nice video and thank you for taking the time to make and share this with us. Like you, I also noticed the brake fluid low but the pads and shoes still had plenty of wear on them. I was under the car cleaning off around the oil pan in the process of replacing it and it gave me a great view of the underside of the booster - and lo and behold it was leaking just like yours. Looks like this is a common issue with this generation of Toyotas as they age out - mine is an 05 Camry. Thanks again! Ordering my replacement master cylinder tonight from ye ol' Rock Auto.

[@HomeownerRepair]

This repair isn't too bad to do.Hope the video helps you out.

[@matthewsmith9410]

If you guys aren't from the Boston area I'll eat my hat. Wicked pissah tutorial

[@HomeownerRepair]

lol...Yup how'd you guess...lol We're off to eat a bowl of clam chowdah!!...lol

[@someone1089]

@@HomeownerRepair Massachusetts plates on the car.

[@YH7R]

Great professional video "my kinda guy " very efficient thanks

[@HomeownerRepair]

Thank you for watching our auto repair video that shows you how to replace the master cylinder on a Toyota Camry. Have a great day!

[@charlesmurray1220]

Excellent instruction. Thank you!

[@HomeownerRepair]

You are welcome!

[@johngarza3022]

Wow! Very thorough! Thank you!

[@HomeownerRepair]

Glad it was helpful!

[@vickiscardanello7660]

Old toyota tech here... moving the air filter top cover gives ya a bit more access... 2 10 mm bolts

[@HomeownerRepair]

Thanks for the added tip! Have a great day!

[@hmorrow]

Great instruction and video angles!

[@HomeownerRepair]

Glad you enjoyed it!

[@armandolopez5826]

Good video

[@HomeownerRepair]

Thanks for watching.

[@soldier001us]

Thanks for the video. 👍

[@dizzyaznboy]

Man great video. Thank you

[@HomeownerRepair]

Thank you for watching our video that shows you how to replace the master cylinder on a Toyota Camry.

[@ahmede.1375]

Great video. What part manufacturer did you order ? Autozone ? Oem? Etc

[@HomeownerRepair]

Here is a link to them on Amazon. If you type in your year, make and model they should come up for you. amzn.to/3v6kOM5

[@ahmede.1375]

@@HomeownerRepair thank you

[@TD3_Archery]

So I didn’t do a bench bleed on the master when I installed it, I can’t seem to get the pedal to firm up with bleeping all the brakes. Should I go back and do a bench bleed ?

[@HomeownerRepair]

I am wondering if there may be some air still trapped in the brake line. Did you manage to get a firm brake pedal back?

[@TD3_Archery]

@@HomeownerRepairyes, so it took awhile, good 10mins or so on each tire and finally got the air out. Now the brakes feel better than they did before. Nice firm pedal.

[@dannysautorepair]

Great video sir. Thank you

[@HomeownerRepair]

Glad you liked it

[@allengpaulk]

It’s possible to bleed it while installed by cracking the bolts loose?

[@HomeownerRepair]

You can crack the bleeders on the brakes and bleed them that we. This method is just a little faster. Hope this helps you out.

[@allengpaulk]

@@HomeownerRepair I bleed each side 2x after putting it in but it still has no brakes

[@allengpaulk]

@@HomeownerRepair would I have to keep doing it to all 4 or could I just do it with the front?

[@poldariser8686]

I just got a rough estimate for the master and slave cylinder replacement on a 2002 Camry. He told me he would have to call around for parts, but I'm looking roughly around $600 for parts and around 3 hours of labor. Yikes!

[@HomeownerRepair]

Unfortunately it sounds about right.

[@ron4413]

How much fluid do I need to get?

[@HomeownerRepair]

I bought a bottle of brake fluid and it was enough.

[@matthewsmith9410]

Great video instruction. I did this yesterday. I found I got more room by removing the air box//filter. I also undid the hood support strut to get that out of the way. The bench bleed went as shown--no bubbles. I got it back in with very little fluid loss. Bled all four wheels and got air free, nice clean fluid through the bleeders. Sadly for me, I still have a spongy pedal. I'm stumped since the laws of physics would say there's no air in the fluid. Any ideas?

[@HomeownerRepair]

If the brake is just a little soft it may be okay. The brake pedal shouldn't be hard.

[@brassmule]

The brake feel on the Camry with rear drum brakes (non V6 engines) was never great, even straight from the factory

[@misstrKevin]

My clutch is sticking to the floor; is it absolutely necessary to bleed the brakes just to replace the master cylinder?

[@HomeownerRepair]

We bench bled the master cylinder so kept bleeding the brakes to a minimum. You should bleed the brakes when you are done just to make sure there is no air the system.

[@saginawmidj2007]

i would love to see how a 2002 toyota camry clutch master is replaced

[@HomeownerRepair]

We'll keep this request in mind in the event that we need to perform this repair in the future.

[@mckevrock]

9:54 what did you guys edit out? I'm having trouble freeing the master cylinder from the car. Yours was broken free after the edit?

[@HomeownerRepair]

Ours pulled right off I didn't edit out anything. If we run into a jamb I always leave that stuff in our videos.

[@mckevrock]

@@HomeownerRepair cool! Mine was stuck, I just had to really twist and wiggle I guess! 👌

[@jacoe33333]

Master cylinder pressure sensor. Where is that located ?

[@HomeownerRepair]

If there is one I am not sure.

[@matttrotta57]

No ABS bleed? I know the scanner has no icon for it.

[@HomeownerRepair]

We bench bled the master cylinder then checked all of the brakes as well.

[@kking2653]

Does this model have abs????

[@HomeownerRepair]

It should

[@rivers4133]

Hi. I am being asked from the parts store if my master cylinder has stability or not? I can't find this info anywhere. 😣 Please help

[@HomeownerRepair]

The dealer can run your VIN number and tell you if your Toyota Camry came equipped with this feature.

[@nathanmccutchen9315]

Dirt debry and shit!!

[@HomeownerRepair]

Thanks for checking out our auto repair video that shows you how to replace the master cylinder on a Toyota Camry.