@5:18 SMH that's where swirlmark city started with that buffing pad on the ground
@keepitfixit27363 жыл бұрын
I think the clear didn’t work the first time,because it didn’t want to lay on that single stage.
@movaughn203 жыл бұрын
Finish product, not bad for under $100 in materials. When we don't spray cars all the time we have to wet sand, and polish. Was looking for reviews on this clear. Looks like it can work great with experience. I last picked up a paint gun, 20 years ago . I expect to be sanding quite a bit. How long did this speedokote 1150 need to cure before wet sanding with those sags?
@davidvitela20364 жыл бұрын
WTF 🤦🏽♂️🤦🏽♂️ were you drunk when you sprayed this ???
@robertberlanga74394 жыл бұрын
That's some good clear I think u rush it and let it sit between coats take ur time save u time from all that buffing good job tho
@garypostell5268 Жыл бұрын
Man I want a better job than this one, all in the prep work!
@garyessary65892 жыл бұрын
Use a clean pad when switching from buffing compound to polishing glaze and don't set you pad on ground keep it super clean any foreign material in your pad will scratch.
@greddmyles36773 жыл бұрын
You can't spray clear over single stage unless you let it cure, wet sand it then shoot the clear
@gasmakingboost3 жыл бұрын
Ahh man you have buffing pad on ground. Try wetting the ground before you paint also
@mini_worx4 жыл бұрын
Great job 👍
@mikep27795 жыл бұрын
should paint the base coat two stage and put the clear coat on within 3-4 hours but no more than 24 hrs
@T.J.Caldwell3182 жыл бұрын
That clear sucks. You can't buff it or it turns to a haze or matte look
@KUBBI74884 жыл бұрын
how do u mix this clear coat? i see more people start using it !
@movaughn203 жыл бұрын
The Speedokote is available from they're site or ebay. It's $59 plus $10-15 for shipping, clear and activator. Mixes 4 to 1 or 3 to 1 depending on speed of activator you choose. I was looking up reviews on the product. Seems to cheap to be true with proper coats...
@T.J.Caldwell3182 жыл бұрын
Its good as long as you don't cut or buff it. It turns to a matte look
@bluewolf11111115 жыл бұрын
A for effort. D for results. 😥
@Mechaniclyfe5 жыл бұрын
“Dyi = do it your self” !! Lmao!! Hope you were joking 🙃
@irietropicals42552 жыл бұрын
Lot of buffing lol
@7727777777777774 жыл бұрын
Wow a rough paint job.....you spray scared to far and not enough cover per coat...the hase is cus you spray paint to dry... and didnt lay down the clear
@T.J.Caldwell3182 жыл бұрын
No its that clear. You can't cut or buff it or it turns matte
@dcurry81474 жыл бұрын
God that looks terrible! I wouldn't want you paint my wheelbarrow