2001 Volvo XC70 ETM Programming using VIDA

Watch as we program an ETM (throttle body) using J2534 and Vida software.
Want a ToolHutUSA sticker send $5 USD to paypal.me/toolhut specify it is for a sticker. Outside US please add some extra for additional postage. You can also support our channel by sending any denomination to paypal.me/toolhut. Any amount is appreciated.

[@BBB-ly8ro]

After watching this very informative video if I’m going to buy an old car I’m getting another suburban, they are everywhere, everyone and their cousin can work on them, new parts are cheaper than used, just an army of parts because Silverado, Tahoe , Denali, Yukon and suburban are all the same thing. I just replaced the throttle body on the suburban, disconnected the battery for ten minutes to relearn the throttle body , googled this this sad day or triumphant day video depending how u want to look at it all in 30 minutes for $112.00. Great video sir. We never did hear how much the software or licensing cost.

[@FlyingPilot2012]

Awesome. One of the only videos on all of KZbin that discusses how to do this with the new VIDA version. Great guide!

[@toolhutusaakathecarflasher3019]

Glad it was helpful!

[@cissyflorida1869]

Oh so it's called the Veda version? Is that the scanner I need to but for my 2001 v70 volvo???

[@cirowilliams7698]

Will program my throttle body.

[@semjon9817]

Thanks for the video, will this work with the magneti marelli throttle body which came from a used car? (having in mind it worked on the other car). Or it has to be a new throttle body.

[@jayneroramass4511]

Great, hey is possible adapt an used etm? Or only using a new one?

[@geraust43]

what OBD2 cable are you using

[@okamorah8251]

2001 Volvo V70XC Hello, would you by any chance have a tutorial on using VIDA DiCE to test the functionality/integrity of the Throttle Body and the Accelerator Pedal? If you don't, would you know where I can find any information? Thanks.

[@yizhan5506]

I just changed my 2001 Volvo etm ,and I got my vida ,can I know I need to pay for download the software? If yes, how to do Can you show me the details?

[@victorvillalobos2822]

Una pregunta con J2534 usas volvo vida y que costo tiene la suscripción de volvo?

[@cissyflorida1869]

I have a volvo 2001 v70 and oh boy. What diagnostic thing do I need to buy to program the updates. To program after I have replaced the coil packs the spark plugs?? Before I did the above, I plugged in a scanner (not the specific volvo scanner) it printed out...the clutch position control sensor

[@cissyflorida1869]

The shop said (before looking at it) the software has never been updated. Oh, I would like to clearify I didn't replace the stuff up above LOL my son who does mechanic work ( not on volvos) did. Oh do you have to reprogram after you install anything on this car I have? Help please!

[@JoeSibCars]

How do I open an account because I've got problems with my ETM how do I open an account

[@8power0]

THANK YOU SAM , I REALLY LIKE YOUR VIDEOS BUT I MUST SAY IT WAS A BIT CHOPPYIER THAN USUAL . I KNOW HOW IT CAN BE WHEN YOUR ON A JOB AND TRYING TO GET IT COMPLETED IN A SHORT SPACE OF TIME . I THOUGHT THESE VIDEOS WOULD BE ABLE TO BE USED AS INSTRUCTIONAL VIDEOS BUT WITH TO MANY MISSING STEPS AND NOT BEING ABLE TO SEE THE HOLE PROCESS IT WOULD BE VERY HARD ON A TECH TO USE AS INSTRUCTIONS AND THANK YOU SIR FOR YOUR TIME .

[@xinstar4721]

How much to buy the new Vida tools. DO u need to pay when download the software to the part? Thx.

[@toolhutusaakathecarflasher3019]

I have not looked into the new vida tools. I have the new LAN tool and it was cheap. Yes you have to pay when you go to use it. Mostly cloud based now. Not a lot to download

[@mkp1214]

When I go to chose my VCI it’s just a blank white pull down, is this a connection issue between my car and my laptop or is it something else?

[@toolhutusaakathecarflasher3019]

Is your device driver installed?

[@mkp1214]

@@toolhutusaakathecarflasher3019 on the computer?

[@toolhutusaakathecarflasher3019]

@@mkp1214 Sorry I do not understand your question.

[@nellysilvia1862]

hello can you tell me how you subscribed from scratch to have life again.

[@granada012000]

How did you keep the vehicle at 13.4 volts for that amount of time?

Using a battery charger

[@jinchen4799]

Hello pm

[@viridian6903]

where can i buy volvo subscription

[@toolhutusaakathecarflasher3019]

www.volvotechinfo.com/

[@viridian6903]

Does this subscription work for Europa continent or its server database for north America cars

[@toolhutusaakathecarflasher3019]

@@viridian6903 I am unsure

[@carlospayne7656]

My vida must be old .....mine dont look like this

[@superbird688]

Hi there question please I saw you choose mvci as the connect device, is it still acceptable for the interface to connect to read the car as of 2021? I use vxdiag but it doesnt work I did install their drivers but no luck

[@toolhutusaakathecarflasher3019]

I am not sure as I do very few volvo. I have done nothin that new.