Outfitter design makes a bracket for the older arm to upgrade to a 1ton Chevy idler arm setup. Might as well do that. The oe idler arm will continue to be a problem
@waltersteffensthezr2man4318 ай бұрын
Appreciate the info my friend I haven't owned that truck in 2 years!! Hope somebody else finds the information useful I appreciate the comment!
@andreusaguilar-gallup5762 жыл бұрын
What front bumper do you have? I have an s10 and mine looks way bigger than yours and I don't like the look of it. Did you take the big plasitc peice off the metal?
@waltersteffensthezr2man4312 жыл бұрын
Okay so the base model S10 has a steel bumper with a plastic wind damper the Sonoma never did it's all plastic color match bumper but the bumper that's on my truck is from a Oldsmobile bravada
@andreusaguilar-gallup5762 жыл бұрын
Thanks
@zachlsims11 ай бұрын
Where is the passenger wire harness to hook up the power seats?
@waltersteffensthezr2man43111 ай бұрын
You're going to need to take the seat out of the passenger side the plastic trim that holds the carpet down You're going to have to reach way back there you might even have to remove the center console
@cognac8297Ай бұрын
How much dod it cost to paint back to stock color
@waltersteffensthezr2man431Ай бұрын
@@cognac8297 couldn't tell you just depends on your local paint shop I did have the hood repainted for about $300 but it was also a customer of mine so I got a deal lol.
@ramdslpwr Жыл бұрын
Any issues with the front drive shaft being too short? I've gone through three drive shafts since my lift and I've concluded that it needs to be longer or the front diff yoke needs to be longer.
@waltersteffensthezr2man431 Жыл бұрын
Had to replace the yoke seal once that's it unfortunately I sold that truck almost a year ago now.
@zachlsims11 ай бұрын
I could really use your help because I recently bought some all power front seats for my S 10 crew cab 2002 and the driver side was easy. The harness was right there but I can’t find the passenger side harness. Is it possible that my crew cab doesn’t have that harness or is it somewhere tucked in the carpet very far in.
@waltersteffensthezr2man43111 ай бұрын
I promise you it's there I've torn apart at least a dozen crew cabs in my life it has the same wiring harness as the Blazer .
@zachlsims11 ай бұрын
@@waltersteffensthezr2man431 I totally understand well I shot you a text so I guess let me know if you get it
@leonnissen6928 Жыл бұрын
What headlights are those?
@waltersteffensthezr2man431 Жыл бұрын
I don't think you can get them on eBay anymore they were called the blacked out clear Sonoma Jimmy headlights
@jeffcornwell41132 жыл бұрын
Looks great Brother
@waltersteffensthezr2man4312 жыл бұрын
Funny thing is I have a 6 inch super lift for the ZR2 used in my garage 😂
@jeffcornwell41132 жыл бұрын
I don't know how to send a pic. On here. I have 6 inches of lift. 4 link rear. Love it.
@waltersteffensthezr2man4312 жыл бұрын
@@jeffcornwell4113 man that would be bad apples hell yeah!!
@jeffcornwell41132 жыл бұрын
I have a 2002 S10 ZR2 , Rough country lift. 33 Achilles.. love the ride.
@waltersteffensthezr2man4312 жыл бұрын
That's awesome bro how long ago did you put the lift kit in?? I know rough country hasn't made one for the ZR2 in a long time!
@austinandannah53573 жыл бұрын
The driver side sits lower cause the gas tank. Go get another passenger side spring and put it on your driver side it’ll fix the lean. Btw having a trac bar on leaf springs causes binding. If you want more articulation take it off.
@waltersteffensthezr2man4313 жыл бұрын
You are correct!! And I already did that with a passenger spring put it on the driver's side from another truck at the scrap yard LoL 🤣
@Digitalpk3r2 жыл бұрын
Where did you find that windshield visor? been looking everywhere.
@Digitalpk3r2 жыл бұрын
Nevermind, my dumbass should have watched the rest of the video. lmfao.
@waltersteffensthezr2man4312 жыл бұрын
you're good buddy eBay!! I had an extra one gave it to a buddy with another crew cab 😁
@Digitalpk3r2 жыл бұрын
@@waltersteffensthezr2man431 I've got an 02 zr2 sonoma with a big ol lift on it and some sort of angled wing on the bed right behind the back window. Don't know what it's called lmao. Been trying to find some other aftermarket parts to put on but it seems like I can't find shit
@nathanskathan51213 жыл бұрын
this is great i ahve a stock 04 sonoma zr5 would love someething like this
@waltersteffensthezr2man4313 жыл бұрын
I paid 250.00 for it I had it shipped from Indiana! The doner truck only had 78,000 miles on it. I use the app carpart.com it's very useful.
@waltersteffensthezr2man4313 жыл бұрын
To be honest your probably better off getting the bottom portion reapolsterd I found out after I got my seat from Indiana that the the hole bottom and side bolster had been replaced I'm guessing that's about 600.00 so I was very lucky to have found that one 😂
@ramdslpwr2 жыл бұрын
Hello, I added this RC lift to my 2003 Sonoma quad cab after seeing your videos. Question for you. How did you adjust your speedometer for the bigger tires? I went to 33" tires on stock rims. 1-1/2" wheel spacers. So far I love the kit and the ride quality. Hoping to get my speedo adjusted.
@waltersteffensthezr2man4312 жыл бұрын
I have no idea 😂 just know you will be off by maybe 3.5 mph mabey 4.
@waltersteffensthezr2man4312 жыл бұрын
So if it says 55mph you will be going closer to 60 mph
@ramdslpwr2 жыл бұрын
@@waltersteffensthezr2man431 OK. According to the circumference I'm 18% bigger so the speed should be 18% faster than it reads. So at 50 MPH I am actually doing close to 58.5. Might go to a chevy dealer and see if they'll program it right. Was just curious if you got yours done. On a side note I'm doing an offroad front and rear bumper upgrade along with bull bar and roof rack. Raptor liner rocker panels. Hoping to have it done this winter sometime. I'll post a video when I'm done.
@scotquigley5132 жыл бұрын
How do you like your rear axle flip? What kind of lift did that give you? How much longer shocks were needed?
@454tietz3 жыл бұрын
Really like your videos. Have to ask. Did you do a body lift as well?
@waltersteffensthezr2man4313 жыл бұрын
Yes 2 inch that was the first thing I did a few years ago
@josevera82323 жыл бұрын
I have a 4 doors chevy s10 zr5. I want to adapt the fender flares that the GMC Sonoma 4 doors has from the Walter Steffens video.Where can I get them? Thanks
@waltersteffensthezr2man4313 жыл бұрын
(Jungle fender flare) just Google it👍 u must choose non ZR2 there should be a number on there website.
@chrislee38604 жыл бұрын
Looking good man following I have 02 crew cab just got a rcx 6 will I have to get any ext front end parts beside the brake lines ?
@waltersteffensthezr2man4314 жыл бұрын
I have successfully found a mint-condition zr5 driver's front leather seat as a replacement thanks 👍 😀
@nathanskathan51213 жыл бұрын
how much u get it for if u dont mind me asking i need a new drivers seat mine was very worn out when i got it
@crullergecko87723 жыл бұрын
@@nathanskathan5121 I would honestly find a set of leather universal seats from eBay found ones and put them in my jeep they are great so far
@lege463 жыл бұрын
Do the 1 ton idler swap, kind of expensive but with 35s would be worth it
@waltersteffensthezr2man4313 жыл бұрын
I'm going to do it for sure
@justinsmith16173 жыл бұрын
Up in crestview got a stock 96 blazer 4x4. Your truck is awesome man. Where are you wheeling at in this vid?
@waltersteffensthezr2man4313 жыл бұрын
Point washington trails off of highway 98
@waltersteffensthezr2man4313 жыл бұрын
Thanks man!!
@williamshort55563 жыл бұрын
Hey where did u get the wood grain window switch covers? I want some.
@dwightschrute38623 жыл бұрын
Sorry if you said it in the video, but what size tires are you running? And are you using the 2.5 or 6 inch lift?
@waltersteffensthezr2man4313 жыл бұрын
35s and I have both lifts combined
@dwightschrute38623 жыл бұрын
@@waltersteffensthezr2man431 thanks!
@chrispuente69103 жыл бұрын
Where did u get your head lights at
@waltersteffensthezr2man4313 жыл бұрын
Good ole eBay LOL 🤣 sometimes they are unavailable I had to wait one time for about a month before they were available again!!
@KD-ls8nn3 жыл бұрын
Walter Steffens. Where did you get your fender flares? I have a 97 Chevy on a 6” RC lift and I’ve been lookin for some
@waltersteffensthezr2man4313 жыл бұрын
There is or was a company called jungle flares they make them for ZR2 and non ZR2. That would be your best bet I got mine from an actual ZR2 and retrofitted them with small metal brackets.
@waltersteffensthezr2man4313 жыл бұрын
True ZR2 fenders are different than standard 4x4 the rear is actually cut back an extra inch to accommodate the larger OEM tire 31 10 50 15
@winstonlee53294 жыл бұрын
what are the specs for the shocks you're using for the front?
@waltersteffensthezr2man4314 жыл бұрын
I want to say they are the rear rancho shocks for Chevy 1500. They seem to be the perfect length because I combine the two lifts I'm glad I rerouted the shock the way it's supposed to be and not the way the kit is made!
@andenquibell34394 жыл бұрын
Was just wondering if you knew of any brands that mad bed covers that fit with the bed rails?
@waltersteffensthezr2man4314 жыл бұрын
None off hand really sorry I just now seen your comment!
@brayanvarela30112 жыл бұрын
What size spacers you got to match with the front wheels?
@waltersteffensthezr2man4312 жыл бұрын
1.5in, hub centric wheel spacers
@Daveisnowhere.3 жыл бұрын
personally i love the oldschool orange lights.
@waltersteffensthezr2man4313 жыл бұрын
That's cool I've just swapped everything to LEDs I just like how it makes the dash and Hood light up better
@Daveisnowhere.3 жыл бұрын
@@waltersteffensthezr2man431 yeah that is true.
@daniellane40344 жыл бұрын
Clean build. You still have the cowl hood? I've got an 03 I'm building, got a ton of rust to remediate (Michigan truck), want the cowl hood and need a bed. I'm in PCB area, so close. Let me know.
@waltersteffensthezr2man4314 жыл бұрын
No I don't I sold it a while back
@waltersteffensthezr2man4314 жыл бұрын
Are you from Michigan ??
@daniellane40344 жыл бұрын
@@waltersteffensthezr2man431 No, the truck is. I found it when I got down here for cheap.
@waltersteffensthezr2man4314 жыл бұрын
@@daniellane4034 I'm from Michigan!! It wouldn't happen to be a red GMC Sonoma??
@daniellane40344 жыл бұрын
@@waltersteffensthezr2man431 red, but it's an S10.
@michaelshuler33493 жыл бұрын
Ummmm.....ummmmm...ummmm 🙉
@charlesmottjr.73314 жыл бұрын
Im in pcb fl i have a 2001 crew s10 ls package. So the rough country lift thats 1000 dollars will work.
@waltersteffensthezr2man4314 жыл бұрын
Yep did it myself 😊 that's why I made the video! BTW I live in Santa Rosa Beach so your very close to me LOL
@charlesmottjr.73314 жыл бұрын
@@waltersteffensthezr2man431 yea add me on facebook. I dont need a 6inch lift but its good to know it will work. Is the 2 inch body lift hard to install. I bought mine for 3500 cash from a man in lake city FL. Its my dream truck.
@waltersteffensthezr2man4314 жыл бұрын
@@charlesmottjr.7331 Body lift is super easy I've got a 2 in on mine which apparently is the maximum for these second generation it's a little hard on the transmission cooling lines
@waltersteffensthezr2man4314 жыл бұрын
I'm driving my Sonoma now in the morning I'm changing out my shift solenoids and I'm kind of old school I don't have Facebook but you're more than welcome to text me at 850-585-6218