2003-2007 7th Gen Honda Accord V6 Starter Motor Easy Step by Step Replacement

Starter Amazon Link: amzn.to/2IqEbV0
Show some support/donate here if you appreciate the video/I saved you time & money: www.paypal.me/...
Hey KZbin here is a video showing you how to replace the starter motor on your 2003-2007 Honda Accord V6. For this job you will need a 10mm socket, 12mm socket, and a 17mm socket/wrench. This should take you 15-40 minutes depending on your skill level but is a relatively simple job.
Please like/comment/share/subscribe and donate to the channel! Donate link in description!

[@TheAmateurCarguy]

Hey guys, thanks for checking out my video. Please hit that subscribe button and give me a thumbs up/like, it makes a massive difference for my channel and every one counts. Also check out my newest video here to see the best car under $10k no one knows about: kzbin.info/www/bejne/aHrPqqB5Ztlknck

[@calebcarr1925]

This video is still out here helping people. Thank you for making this!

[@704smalls23]

Great video, for any doing this remove the battery tray, takes like 3mins and gives you so much more room to work with!

[@CharlesG.-ky6lb]

The information was very helpful. I didn’t have to remove the battery tray. Thanks!

[@CoinsforSalecom-li9rn]

Thank you! You saved me $300 in labor.

[@Syn-gm2yw]

Mine just went out. Ordered replacement online. Thanks to your video, I’ll be trying repairs out myself. Hope it goes good

[@draketheduck3394]

Great video, helped me get it in and out within an hour.

[@TheXxikillyouxX]

Subscribed and im going to attempt this tonight (have an ‘07 accord coupe v6 stick shift same color)

[@TheAmateurCarguy]

Nice, hopefully it goes well for you, let me know. Thanks for subscribing!

[@kevinosorio4246]

Bro thank you I just changed mines. it works perfect.

[@F9000LIi]

Thank you thank you thank you THANK YOU!

[@TheAmateurCarguy]

No problem, I am glad the video helped you. Please subscribe if you haven't already and thumbs up/like the video. And if you feel extra generous check out one of my new videos :D. Either way glad I was able to help you out, have a good one!

[@dknight211]

Thanks for this good video!

[@viethoale7310]

Very clear

[@Mr1234ottf]

Thanks for the tutorial

[@TheAmateurCarguy]

No problem, I am glad it helped you!

[@borundangas]

Thanks for the info

[@michaelmurphy9546]

Thank you for the diy vid

[@joeishere500]

, nice simple video. Thank you. About how long it take you

[@marbel4987]

you rock! thank you so much and god bless ..

[@robertmccormack9081]

Did you have any isssue with the starter fitting? On Amazon it says it’s not compatible with my 05 accord v6

[@thepeff]

Any advice on un-freezing the bottom bolt? No way I'm fitting an impact driver down there

[@TheAmateurCarguy]

Hey I assume this reply is too late, but it looks like at kzbin.info/www/bejne/p6XEg4aDnr9njNU I had a hard time with it but lined the wrench up in the fan blades and carefully used that little bit of extra space to break the tension of the bolt. Hope that helps

[@davontyrell3724]

If you are near Georgia or know someone can you please do mine for me 😭

[@eminemsmenime3605]

Can You Help Me Reset My Radio ? ‘09 Honda Accord .

[@yanrugel6583]

Anyone else having a lot of trouble with bottom bolt? Whoever tightened mine probably decided to tighten it with air ratched. I've put ALL my weight (235 lbs) and it will not budge.. help please.

[@johnhenderson5066]

Put a long metal pipe that’s barely larger inside diameter on the wrench handle. Every extra foot of length on the handle divides the needed ft lbs in half and so forth

[@TheAmateurCarguy]

@@johnhenderson5066 Perfect, thanks for giving him that good advice!

[@eminemsmenime3605]

Can You Help Me Reset My Radio ? ‘09 Honda Accord .

[@Syn-gm2yw]

Eminems Menime radio-navicode.honda.com/