Рет қаралды 116
Showing the progress on Wheel 3. This was the worst of the group that needed the most grinding & sanding to re-contour it back into decent shape.
I used a drenmel flap Wheel on the spoke damage & feathered into the OEM finish. Then I moved on to the rim of the wheel. This required a 60 grit disk on a velcro drill attachment to sand everything past the gouges & re-level the surface, blending it back smooth. I followed up with course (brown) medium (red) & blue (fine) scotchlock pads on a drill. I went over the spokes with the scotchlock pads as needed to smooth & level the surface.
Final treatment is 320 hand sanding to get an even finish for the metal etching primer. I will wash everything down before a full 320 sanding with a red a scotchbrite pad & dawn dish soap. That will get the surface even scuffed & super clean.
Part 1:
• 2004 Saturn Vue Projec...
Part 2:
• 2004 Saturn Vue Projec...
Part 4:
• 2004 Saturn Vue Projec...
Part 5:
• 2004 Saturn VUE Projec...