2004 Yamaha R1 WRECKED Bike REBUILD (Complete Rebuild Timelapse) Start to Finish

[@veselin_mitkov]

6:36 i saw it, you cant hide it from me.. I SEE EVERYTHING!!!

[@bharadwajbungab]

Swapped grenade with the safe rotor 😆

[@gabrielfraenkel2473]

I love when people work so hard to bring bikes back to life. Thanks!

[@yzfr6806]

Bringing bended bikes too life

[@نعمهحامد-ي6ه]

​@@yzfr6806عغععغغ لا يمكن نتجمع عند مين جربت كل سنه وانتي طيبه يا حبيبتي

[@نعمهحامد-ي6ه]

❤❤❤

[@نعمهحامد-ي6ه]

❤❤❤

[@نعمهحامد-ي6ه]

❤❤❤

[@EnterpriseXI]

Amazing how tough motorcycles are. If you know what your doing, you can get a crashed bike fixed relatively quick compared to a car

[@abhijitsonowal8633]

bruhh really? comparing a car to a bike?

[@alanwatts8239]

Wait until you find out that the frame is bent. lol

[@chrisbauman2562]

Cars suck bro. Bike life where it's at

[@raselsk7111]

​@@abhijitsonowal8633 *zw❤wwjj

[@Near2Future]

Dpeneds on a crash. You can't loop a car & if a bike slams into a guard rail. It'll be a write off as the frame will take alot of damage. Can only be welded by a pro if it's cracked.

[@lanthan598]

it's honestly wild to me beyond belief that you can strip a motorcycle clean and know where all the wires, bolts and nuts and everything goes back meanwhile I'm too scared to even snip one wire off of my motorcycle lmao

[@alanwatts8239]

In all honesty though, if he screws up and doesn't remember where something goes he can always check the footage. lol

[@MrFPSWisconsin]

Once you work on them enough they are all so similar kinda like how it’s similar to guy a deer and a squirrel. Sure there are some differences but for the most part they all have the same parts

[@thebigoaktree8401]

Yeah he’s a bad bad man. He brought my 02’ 955i back from the brink of death when everyone else couldn’t or said scrap it. He’s the only technician that I’ll go to time and time again! Love this dude brah.

[@willieboy8798]

try being a race mechanic .... rebuild after a rebuild after a rebuild every race season....

[@NoReverse77]

Bikes are pretty easy when you’ve done it a time or two.

[@RyanRacing729]

A 636 at 6:36 you're a dork. Appreciate the upload. I just picked up a 06 and I'll be doing a rebuild as well. You're inspiring me to make a video on it.

[@whothehellisrob]

I was wondering if anyone else caught this lol

[@LEGE7VD]

You make it look so easy! Props to you man. I took my 04 r1 apart in the hopes of working on in the winter but life happened and now it's at the shop 🙃

[@mateodiaz109]

Lol

[@crazyzew9800]

im so glad it took me 6.36 seconds to understand 6:36 hahah good one

[@michaelb4060]

Fantastic work! I have that same bike in my garage and love it. Such a beautiful design and the exhaust under the seat keeps your butt warm on cold nights. Not so great on warm days, but nothing a shower will not fix. Thank you for bringing it back to its original beauty. Makes me want to take mine out for a ride.

[@rinchhana94]

of all the rebuild I've watched you're the guys i trust....i like the nice minute cleanup you've done......part replacement seems trust worthy.....love your video......keep making bike videos....... I've watched some of your videos for like 3-4 times like for same video to calm my mood and be satisfied.......loved from india

[@RKMotorsports]

Thank you!

[@otiberino1926]

LISTENING TO IT WHEN IT TURNS ON IS LIKE THE CALM BEFORE THE HURRICANE 😂🎉😮😮❤😂😂❤

[@verdeboyo]

That's damned good profit. The oldies are holding good value in 2022. I had the same bike and colour 10 years ago and think it is one of the best Yam gens ever. Great build Sir👍🏻

[@RKMotorsports]

Thanks Gio!

[@arpitapatra5972]

Yshhshzzshshdu

[@tartar8660]

good video good work good music i like this Man tanks from Saudi Arabia

[@busterstyle6902]

Such a nice work! I brought my R1 2004 in 2010 and have it still now. I love this bike with all my heard. It was my dream and come true. It was such a pleasure 2 watch you working on this bike and i learn an important thing. I do the oil change every spring by my own but never before i fill up the oilfilter when i change him. I will do this from now on becourse i think it is better for the engine if the oil is faster where it have to be. So thx from germany.

[@blackmore6468]

This is better than any ASMR ever! Gladly subscribed, looking forward to more vids! That generation of R1 is, and always will be, timeless looking. It's only second to the Big Bang restyled version (only because they removed the glass from the headlights). It still looks better than any modern R1 !

[@RKMotorsports]

Thanks brother! plenty more videos like this to come! And I have to agree the styling of this bike is on point!

[@armandomendoza4441]

That R1 style is the best bike from Yamaha

[@thomasmorrison6068]

This is a phenomenal video for reference. I am actually in the process of doing the exact thing with 2005 R1. I got the bike back up and running and fixed the engine light issues. Now I just need to fix the brakes and work on plastics

[@THE-APEX]

Excellent job Rob. Came out so nice. Consider getting in the habit of hitting a timer, physical or electronic, whenever you start work on a bike to make certain you are profitable. Lets call those billable hours. Once you've done a few, you'll be able to measure those hours into how much you actually earn an hour and ultimately become even more efficient in your process to achieve greater profitability. Just a thought. Again, great work and you've inspired me to pickup my first damaged bike!

[@RKMotorsports]

Great idea with the timer, i'll remember that for next time!

[@markosz22]

Wow that bike sounds amazing! So deep and smooth, not farty and crackly like what most have nowadays.

[@aarontv1968]

I wish someday to have at least 400cc inline 4 bike , thats my only dream 😍

[@mdzihad8787]

Jk

[@321ktmman9]

Can you fix my bike

[@kyrnn.]

I think Kawasaki have 400cc inline-4 but i don't know if it's true

[@aarontv1968]

I want ninja 400 at least

[@rkjg94]

Bandit 400 is sick

[@PMichaelS04]

This video was an absolute eye opener for me and an inspiration. This last week I took apart my 150cc scooter as a first project to try and fix it. Great start to bike mechanics though 🏍

[@Asylum3D]

Just did a R1 for my brother that was in a fire. Injectors, wiring harness, plastic, fuel pump... People don't realize how much time you get invested working on these. That is why people shouldn't freak when you say the dirty word 'profit'. Yours turned out great and glad you made some $$$ on the job.

[@nkosiwalters2195]

Watching this video reminded me of those lifetime movies where things start off bad, but the movie closes with a happy ending. Thank you for giving this bike a second chance and a new home.

[@RKMotorsports]

Gotta love those lifetime movies! Always pulling through with a positive ending! lol

[@powamoto]

Biggest fan Powamoto says let me test ride Dat Thang 🤟💯🔥🚀🤘👍

[@ask4george1]

Excellent video. I like the way you speed things up, just cut to the chase, stop talking, and repair the bike. That was awesome. I get impatient when they talk too much on a build.

[@jdmikeg4]

That is freaking awesome that somebody had a BRAND NEW gas tank from 2004 laying around.

[@RealRickCox]

Wow!! You did a great job getting that bike restored!! I'm about to take on a 2007 R6 build. And I think I just might (accidentally) throw an R1 motor I have laying around into it. Whoops! LOL

[@fiorevicidomini8220]

@06:56 next time try to polish a bit the "shaft-bolt", once the dirty/rust has gone, apply some Grease on the surface. Aniway, you did an awesome job! Congrats!

[@sion1885]

My favorite moment is at 6:36

[@kingofkings852]

I’ve done this to my 07 R1 after I hit a deer. Needed just about the same in rebuild/restore. While it was fun and I learned a lot with bikes (being a car guy my whole life) I must say one has to weigh what the cost in vs cost of the bike itself. Once you start buying OEM fairings, which they’re painted and is the only way to go, the price adds up quick. I mean quick. To fully restore my bike from a hit head on with a deer and road rash on one side it cost me around $2k in just parts. Most was OEM, several were aftermarket. And I did it all myself = $0 labor. So if you paid someone to do it then of course you’re looking at a way diff price. Take that and the price of looking around for another bike.

[@sagarkamble4114]

Soo satisfying 😍 You're Amazing brother! I wish, I could do what you do.. That R1 is just dope now! Love from India 😊

[@RKMotorsports]

Thank you so much 😀

[@boostleakboys4387]

If you have a background in auto, these things just seem like oversimplified vehicles. Real easy and simple to work on. Spend 30 bucks on a a manual and you are off.

[@thisisben3593]

But man, what a sick looking machine! I bleed blue and man you've done an incredible job

[@owen368]

You a Vulcan?

[@Isha048]

I can't believe what you just did! Great job! Thank you for sharing, I was watching and asking how can it be possible... and step by step it happened... amazing! When I was much younger I wanted to learn how to assemble and disassemble bikes, but it didn't happen and now it's too late. OK, let's see in the next life 😄

[@parvizmardi2155]

Hard work and skills paid off. I like people who are expert at what they do.

[@j.a.r.family2576]

Just discovered your channel on this video. And I love it!!! Absolutely going to continue following.

[@rainiepaulsen262]

Nice work, clean and bright.... I really enjoy your knowledge of motorbikes.... Congrats!!!

[@liontsbeast462]

Very awesome to see how well you can do that, that's what you call a professional.

[@waseemkhan0312]

Well done 👏 you made it like a new. The thing I appreciate that it cost you. 2454 usd sold it for 6000. That is great. You spent a decent time to make it like new. Well done 👏 keep it up

[@gautamji9840]

You are the only guy I want to make my best friend. 👍

[@slyfergarcia2120]

Very cool guy, your videos are from Brazil 🇧🇷 and I follow you, I also want to restore some bikes from here, I watch your videos as inspiration, really good, hugs...

[@davidmacdonald7841]

Amazing results, well done to you 👌👍 Enjoy all the content, keep up the brilliant work 👍 watching all the way here in Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@RKMotorsports]

Thank you! Cheers!

[@hellraiserrec19]

Beautiful bike! Love that blue! Great job man

[@jclc4201]

Nice vid man! new fan here. Keep up the nice vids!

[@charlie300c8]

that peal on the bottom of the tank was satisfying AF

[@mrkthmn]

Phenomenal work on such a beautiful bike! Owning an ‘06 R1 is high on my bucket list. I love my MT09 but the ‘06 R1 bike just might be my all time favorite.

[@MC909Garfield]

I Love the "Hooow that's satisfying" when you peel off the back of the tank's cover :) :) Hu' , Nice job , to reveal a bike like this you made an hard job and you made it nicely. Respect .

[@collegestudent6071]

Guy certainly loves his impacts.

[@youssefzegari1618]

I like this finally job that you did it's really wonderful with the design and new ideas you applied on your bike good job 👍👍👍👍👍😎

[@RKMotorsports]

Thank you very much!

[@arbab8114]

I am addicted to your channel. Love your videos man. Keep it up.❤️

[@marktroughton1064]

A work of art. You make it look easy. 😂

[@earthtrekker1]

You did a brilliant job getting that R1 back to mint condition, 👏 👍

[@Stathis_Floros]

Excellent! Greetings from Greece 🇬🇷

[@severride0190]

How I miss working and Serviceing such bikes, wish i could go back to that Time

[@shiftngearz]

Rebuild a Honda rc51!! I just rebuilt one myself!

[@Odin-z1q]

Awesome video. You got that bike running smooth af, it was looking so fresh. Nice bit of profit too. Great job and cool workshop. New subscriber for sure.

[@whomi2379]

You guys did some awesome rebuild I'm an IT expert and bike fan so i think if I live in your country I would love to take an internship of your garage

[@koosgabor4946]

Szép munka! Gyönyörű lett az R1!

[@sideshownomo]

We need more videos man! PLEASE!!!

[@stilltlrforlife]

I love the team colors of Yamaha..miss my R6 so much

[@nikolanojic6861]

Awesome my dude i love your videos ! That bike sounds hungry :D

[@perrinperformance1]

I am doing the same thing to an 06 r1. Cool to see another same gen r1 rebuild.

[@Motorcycle5667]

That looks like so much fun.... building it

[@danipetualang7072]

really great job comrade 👍 you are amazing

[@RKMotorsports]

Thank you so much 😀

[@wisehomo]

Very good job really putting it all together. Amazing work totally worth the profit you made of off it.

[@The330racing]

Wouldnt it be a good idea to polish up the swingarm pivot and grease before you put it back?

[@mkpaljevine]

What's with Kawasaki on 25:04?

[@ahmendy]

Great effort. I think the cost of refurbishing it was higher than the cost of buying one used and completed

[@rustytanks]

Traded my 04' in for an 07' V-Strom (old age) seeing this video I suddenly miss my R1, nothing moves you faster over the earth than a R1

[@phmtb]

Great Job! How did you manage to match the engine paint though?

[@grashoper107]

I could watch it 3 more times just for the sound

[@jamest4383]

Did you reinstall the swingarm pivot dry?? Maybe it was the camera but it appeared to have no grease. I hope you greased all the linkage pieces as well.

[@АжибаАжи]

The sonic comes back to the road. Nice jop bro

[@twowheelthings]

I do a lot of the same type of builds. Great work, man!

[@ingolfursnorra]

Truly an inspiration to see how you conduct your work, great video!

[@RustBucketRepair]

Congratulations on the new signs hanging on your building.

[@asturiancetorix2552]

The torque wrench´s sound it´s unbelievable satisfying.

[@hassanbouamoud6285]

6:36 no one gonna talk about it 😂😂

[@keirra5096]

Satisfying 👍👍 good job keep up the good work ❤️😊.

[@RKMotorsports]

Thanks Keirra!

[@keirra5096]

@@RKMotorsports you’re welcome

[@lonniejoraskie4440]

Never cease to impress.

[@haymush69]

Lmao a wild 636 appears! I see you

[@zolipinye122]

Szépen megcsináltad , nekem is volt ilyen modellem , így tovább✌️✌️✌️

[@saulnajera1081]

I’m restoring a 2001 Kawasaki ninja zx9r stripped completely replaced the engine wire harness making it brand new. Nice job on the work your doing I enjoy ur videos bro.

[@RKMotorsports]

Thank you Saul!

[@saulnajera1081]

@@RKMotorsports I just ordered my new fairings using your promo code it really saved me some money I got a pretty good discount at Auctmart I’m excited to get my new fairings to complete my build thanks for the promo code I appreciate it bro 🤟🏽🤙🏽👌🏽

[@RKMotorsports]

@@saulnajera1081 awesome! Glad I could help you out!

[@jnavonoD]

Great job man. Will watch more.

[@wellingtontomazdeoliveiraw1310]

PARABÉNS AMIGO! FICOU MUITO BOM!!!

[@tedbutterman4614]

What brand of spray paint did you use? The painted parts turned out great.

[@trevorbredereck4095]

Awesome I own A 2005. The micron the slip one you like I was just going with the danmotto had that on my 1000RR LOVED THE SOUND

[@THEME_GAMERZZ]

the sound of exhaust is awesome

[@s_diaz7706]

Loved this build just purchases a fairing kit from them using your code 👍🏼

[@alankuentz6417]

You have a Tri-Z! That's awesome. I loved mine. Would probably still being riding it to this day had it not been stolen. :(

[@gasafschick]

Schaue gerne deine Videos. Gute Arbeit 👍 Grüße aus Deutschland

[@damonstewart2565]

Strong work brother !

[@JermaineWilburn-w7x]

At least your MUSIC,sounds 👍👍,good look,when watching

[@seanpaul4907]

This is a very good video of a rebuild!

[@thewicketd7817]

thanks for the video man i start motorcycle mech school in few days this help my calm me down haha i bought a 1999 suzuki gsx

[@sandzegarra4473]

eres lo maximo siempre veo tus videos desde PERU - PIURA SAND

[@derhaddi]

NICE VIDEO!🔥🔥🔥🔥

[@repomannv]

Well done sir, and sharp video, got right to it, that's what I like.

[@estees5432]

Nice and solid exhaust note.

[@anthonymasters3885]

Great upload. I always enjoy your work! Super looking ride.

[@fdfjsgfjhsd]

Отличная работа. Сколько же стоил бак?

[@roniellegriggs6883]

Ugh the 04 R1 is my dream bike. I’ve always wanted one in red

[@RKMotorsports]

I believe in you, one day you will get one my friend! Maybe you will even meet me one day! 🙌