2005-2009 Buick Lacrosse Front Hub Bearing Replacement

[@pmrttw]

Thanks for the torque setting specs. Most mechanics don't give them...very important. I called the Buick dealer parts/service department for the torque specs and I was shocked to hear they didn't know them for the hub nut...OMG! You're awesome brother 👍

[@TheOriginalBeeCee]

I appreciate the comment! And trust me, they know them lol. No dealer will EVER provide you anything to help you work on your own vehicle though because of course they want you to bring to them and have them do it!

[@theducklinghomesteadandgar6639]

EXCELLENT Tutorial!!! So much more clear and instructive than I was ever taught at “VO-Tech” Technology Center!! I have definitely subbed, liked and all of that, and I will be watching every tutorial video you have!! Thank you, so much for putting these together!!!

[@TheOriginalBeeCee]

Thank you so much for the comment! I truly appreciate it! 🙏🙏🙏

[@alimohamedasad]

You video is VERY VERY helpful May God bless you brother, in Islam we say each one teach one. Thank you brother, I'm working on my hub now👍👍👍

[@TheOriginalBeeCee]

Thank you 🙏 best of luck with the job!!

[@edgbostonnorth7167]

Thanks for including the Tq specs on evey step on the job

[@TheOriginalBeeCee]

No problem! Appreciate the comment!

[@jeremytate7517]

Great video was looking for how to properly change the wheel hub and specs on my 2006 Buick lacrosse this weekend thanks for the helpful insight.

[@TheOriginalBeeCee]

I appreciate the comment, good luck on the job!

[@MrSakata]

Great video! You're a legend. I have 06 Lacrosse and this video is going to be a big help when I fix it in a few days. Thank you

[@TheOriginalBeeCee]

Lol I definitely appreciate the comment 🙏🙏

[@dakotastubbs8002]

You the goat finally a Buick series. N your camera skillz.goat

[@TheOriginalBeeCee]

Lol appreciate it bro 🙏

[@aidandavis9004]

Great video, thanks!

[@TheOriginalBeeCee]

Appreciate it! 🙏

[@TheVick7]

About to work on the exact same thing on the passenger side as well. Very well done video!

[@TheOriginalBeeCee]

Thank you! Appreciate the comment 🙏

[@daoudadiop2421]

Très professionnel merci pour le partage

[@mmbs3191]

Had a slight 12 to 6 wiggle before changing my wheel bearings. Now the 12 to 6 wiggle is gone, but i have a 3 to 9 wiggle that wasnt there before. I already have some new tie rods that havent been installed. Im just wondering if i could have done something to cause the 3 to 9 wiggle. Everything went back together smooth, no extra pieces, and torqued to spec.

[@fleetgoddess21]

Outstanding Video.... Do you need to clean the rotors of any contaminates before sending the customer on their way?

[@TheOriginalBeeCee]

Thank you!! & You most definitely can! Not a must, but I’m all for shooting some brake cleaner on them and wiping them down!

[@sir6591]

This video helped me get one side I’m having issues getting the axle nut off the other side thanks tho

[@TheOriginalBeeCee]

Try heat if you haven’t already, and if you haven’t, more heat lol. I hope you are using an impact though because thats by far the best method for removal.

[@sir6591]

Heat wax n torque wrench helped

[@fixingrandomstuff]

You gotta wire brush , antiseeze that hub before installing it.

[@TheOriginalBeeCee]

I’ve done it in the past…I do it when i feel like it lol. But if it makes you feel better, go for it.

[@Backindemand]

Mr BEE Cee can you do a video on replacing the high mount brake light

[@sir6591]

I found it easier to take the caliper off with the two bolts instead of all 4 so that way u don’t have to try and get the pads back in

[@TheOriginalBeeCee]

Whatever works! 👍👍👍

[@darrelloseyii6561]

Do you have to use a regular socket wrench to tighten the 3 bolts or you have to use torque wrench?

[@TheOriginalBeeCee]

A torque wrench is ideal, of course because they don’t make torque specs for no reason. But you can definitely get away without torquing the bolts if you are familiar enough with wrenching.

[@darrelloseyii6561]

@@TheOriginalBeeCee tighten my shit tell they talk back to me and give it a little more

[@mhildack]

Use a lil thread locker. You can probably see some on the the bolts you took off

[@sir6591]

Does it matter which way u put the bearing in. The sensor disconnects after driving

[@TheOriginalBeeCee]

Most definitely does. That wire is tight and needs to go back in exactly how it came out. Check @ 16:35

[@sir6591]

@@TheOriginalBeeCee Preciate yo responses finally got both sides changed

[@TheOriginalBeeCee]

@@sir6591 nice man glad you got it done 👍

[@mhildack]

My bearing broke off with all the stuff stuck inside the knuckle.

[@TheOriginalBeeCee]

Damn lol. I’d imagine the symptoms/issues while driving were pretty prominent with it being in that condition.