2005-2010 Hyundai Sonata/Santa Fe/Entourage Power Steering Pump Replacement

Replacing the Power Steering Pump in a 3.3L V6 Hyundai Sonata. This procedure will be similar for the 3.3L version of the Santa Fe and Sedona/Carnival - since there is more room to work on these cars, you may or may not need to take the pump apart to remove it.
My choice in this video was to take the pump apart to remove & replace it. If you want to pull the axle, you are welcome to do so.
List of tools I used:
Jack Stands
10mm socket
12mm socket
14mm socket
19mm socket
24mm socket
14mm wrench (highly recommend ratcheting wrench)
Breaker Bar
Pliers
Paper towels
2007 Hyundai Sonata
Hyundai Sonata
Hyundai Santa Fe
Hyundai Entourage
Hyundai v6
Hyundai 3.3L v6
Power Steering Pump
I am not responsible for anything you do after watching the video.

[@dmcc8504]

Thank you dude. This is the only video i could find eith legit step by step instructions. Much appreciated 🤙

[@onthevergezotv1233]

Great video, but for anybody else working and doing this, having it stuck and not wanting to to get into breaking apart the pump , I did it this way: I separated the lower ball joint and removed the strut bolt Removed the axle nut and get the axle out (from the brakes and rotor side) Remove pulley of the pump Then once the axles is out (from the brakes and rotor side) and the pulley is off the pump you have enough room to remove the pump no problem. Just throwing a suggestion that might make your life easier

[@garylcarrier]

Very informative and thorough! Excellent instruction! Thank you!

[@chronicle5719]

Question bro my steering is very tough when stop like when backing up no fluid leak anywhere reservoir is full wonder if it’s the pump this video drew my attention?

[@icefire776]

@chronicle5719 is there any noise? If there's no noise I'd try flushing the fluid. Drain and refill a few times. Drive in between. If there's a bad noise then likely the pump

[@khg151]

Thank you for this. Very helpful demonstration and explanation. Curious, did the new pump body leak after reassembly due to taking it apart to get the new one in?

[@icefire776]

Pump did not leak at all. I've done an additional 4,000 miles since the video and no leaks at all

[@jasonfitzpatrick414]

It looks like he started on the job at night after work. Then he woke up the next day and finished it. I wonder how many hours it took? I'm guessing about four hours. So, four hours at 120 in labor from a shop and 250? for a pump is what it would cost- 750? Maybe a mechanic can work faster or experience removing pump? Hopefully, faster- but we all know we get ripped off by the labor book. Nice video, looks like a mess or nightmareforall to remove.

[@thomasgoetz5375]

The labor guide shows it takes 1.6 hours. Lol

[@thomasgoetz5375]

The labor guide shows it takes 1.6 hours. Lol

[@river631]

Thank you 🙏

[@donaldle6065]

Dude you saved my life, I didn't have the money to fix my wife's car and she would have divorced me if she found out I spent all of our savings on Bitcoin and couldn't get her a new one. 👍👍

[@fergap9438]

How much it would've been at the shop?