2005 - 2010 Toyota Avalon Radio Install

[@ProvoBeastAudio]

Parts used linked in the description of the video!

[@TleetoBlackLLC]

Would the recommend radio be the same process ?

[@ProvoBeastAudio]

@@TleetoBlackLLC You got it!

[@greg21332133]

​@@TleetoBlackLLC 😊pp😊

[@anassami215]

this literally is the most useful video I have seen relating to audio for the gen 3 avalon in a long time. Thanks a TON

[@anassami215]

thats also a pristine avalon with perfect dash leather/cover. nice upgrade

[@patrickcorcoran5518]

I'm not sure this is something I would try, but it is the best how-to video I've ever seen. From your knowledge to your presentation to your speech to the camera views, I've never seen any presentation this good.

[@josephlucas819]

great work...just did this with my nephew...2005 with navigation...Crutchfield has kit to retain amp and steering controls...Called a PAC unit...installed between new head unit and car harness....called few times for support just to make sure.....works perfectly....this video let me know it was doeable...crutchfield helped us execute to make sure it was done properly....

[@thesequencersofficial]

Did pac unit solved the need to keep old unit connected?

[@ProvoBeastAudio]

@@thesequencersofficial Yes, see this video: kzbin.info/www/bejne/rZ27hJqZiNRsqqs

[@ace5590]

Thanks for the video, just finished my job. Your video was awesome, but it was tougher for a person that doesn't do this often than the video might imply.....A couple of points for someone getting ready to start this.... getting the 12v "cigarette adapter" out of the center console was one of the toughest jobs (ugh)....make sure to leave yourself enough slack up front when running your harness to the trunk.... when using the Axxess ASWC-1 Steering Wheel Control Module there is a chance that the wiring is reversed to what the video and Axxess says on their website (mine worked fine after reversing them)..... the plastic brackets with the 95-8215S dash kit didn't line up perfectly on my 2007 Avalon Touring, had to break off the little plastic alignment pins that should locate the brackets on the side of the radio and wing it to get the unit aligned properly in the dash.... if you're using a backup camera and this Pioneer unit, be sure the plug the yellow camera "video output" into the brown BC input....to keep from scratching the vinyl areas around the dash while working on the install use some blue painter's tape to protect it and take it off right before final installation. Took me about 8 hours total and about a half pint of blood from skinned knuckles, but it looks nice now! Good luck.

[@KingH734]

do you retain FM AM radio with this install? for some reason crutchfield is saying i will lose "satellite radio". is that referring to sirius XM or my FM AM

[@solefoodbrand1699]

I had this done the morning after watching this video.

[@roycewhite4202]

i have been looking for a aftermarket anything for the avalon you are my life saver bro

[@thesequencersofficial]

To add to it, I figured one thing out Instead of the whole old radio Try to take off the top cd drive part and front and just use the bottom portion where cables plug in This simplifies the unit and you will be able to fit it behind your new radio along with that long cable 😃 I installed mine like this and the climate screen works perfect and no need to run cable to trunk and install old radio there. Feel free to ask questions directly if you have any! Cheers

[@honainmushtaq9527]

THANK YOU SO MUCH BLESS YOU

[@johnwagner8465]

So you didn't have to put the radio in the trunk?

[@thesequencersofficial]

@@johnwagner8465 nope!!

[@alicen4550]

I know it was a while ago, but how did you only remove the front and CD portions? Do you have tips haha?

[@thesequencersofficial]

@@alicen4550 just remove all the screws on the unit, it will start coming apart Take off front panel and knobs And now it should split in two single din units Detach any ribbon cables from cd to main lower board and you will just be left with a lower section that has the slot to connect the wiring harness I could have further dismantled it but I left the metallic frame attached so that it can act as a heat sink for the board Thanks

[@larryrockemann8014]

This was amazing--You are a real pro! Wish I had that ability and know-how. Your presentation, explanations, and step-by-step was so well done! Thanks.

[@bbstacker70]

Just an excellent video. Smooth narration and totally useful narration.

[@NWCI]

Great video, I installed a backup camera on my Avalon, there's a better way to plum the wires, remove the rear door sill you'll have access to the trunk by the shoulder area, that will bring the wires directly to where you hid the original stereo, so you don't have to run the wires on the trunk floor

[@DaGoat-hk1fu]

Where did u put ur camera

[@NWCI]

@@DaGoat-hk1fu This is a summary video on how I installed it on my avalon.kzbin.info/www/bejne/qGLTcqKlitqhrLc

[@richlyons456]

Love the video. Can’t wait to install this in my Avalon.

[@martinandersen9810]

I really enjoyed this video tutorial. I purchased every item you demonstrated and it is coming together just as outlined. The only issue was removing the cigarette lighter. That was more difficult than I expected. I wish I could had a video on how to remove it, but I finally got it. I also had to drummel out the cigarette lighter hole a little bit so that the usb/aux port could fit into the hole.

[@jamesapplegate3341]

Im running into the same issue.... how did you end up removing the cigarette lighter?

[@martinandersen9810]

@@jamesapplegate3341 I had to crush it with pliers and get the lip to disengage from the plastic. Someone else might have been more gentle with it, but that is the only way I could get it out.

[@CorrectContrarian]

Excellent tutorial. I will be looking at it again when I’ve got all the parts lined up and decide on a unit to use

[@MindsetGreys7236]

I just found out the factory radio fits behind the touch screen radio so says my mechanic so I hope this is usefull to someone

[@JK-Arch18]

That is what I trying to do, I have Avalon limited 2008 with JBL, do what harness you used it it the same one in the video?

[@derekbanks4905]

@@JK-Arch18 I’m having the same problem. I have a 06 limited w jbl an I wanna know what can I use to put my aftermarket radio in..

[@derekbanks4905]

@@JK-Arch18 can you tell me which harness

[@ranyg6494]

​@@JK-Arch18 which harnesses???

[@elibrown7879]

Very much helpful 🙌🏾

[@billcosby3231]

Thank you for this. Helped me so much in my 06 Avalon.

[@cameronjon1789]

What a fantastic video. Very detailed and thorough. I wish he’d gone into more detail about the wiring process and shown how he built the harnesses for the touchscreen radio. I have an Avalon 08, and I want to install one myself, but what confuses me the most is the wiring. 😓

[@ProvoBeastAudio]

Here you go Cameron: kzbin.info/www/bejne/pp3EkGOMpa2HrNU

[@cameronjon1789]

@@ProvoBeastAudio Dude, god bless you and your channel. 🙏 I’m going to attempt to do it myself now with no experience but going based Off of your videos, lol. Hopefully, I don’t mess up.

[@Victory_._]

@@cameronjon1789did you do it?

[@philipgatling4889]

You described everything excellent!! EXCEPT FOR THE PART ABOUT HAVING THE JBL SYSTEM instead of standard one. I bought the harness and aftermarket harness and was puzzled on why the didnt fit!! Wasted about 5hrs of time and trying to get refund for the harnesses. Gotta get the tty-11 its in the comments!

[@ranyg6494]

@Philip Gatling How's everything?? Did everything on the multifunction display work just fine??

[@FFCasale]

Outstanding instructions! Makes me want to do the install NOW! Not to afraid of the job after this....thanks!

[@ProvoBeastAudio]

Subscribe!

[@tonytran2284]

I need someone to do this on my 2007 Avalon. I'm afraid of connecting the wrong wires and frying the car. :)

[@ProvoBeastAudio]

Well, follow the tutorial and you should be fine. If not, any local car audio shop is your best alternative.

[@depecheddurand]

buy a new avalon lol

[@ProvoBeastAudio]

Buy a new Avalon just to replace the radio...because that makes a whole lot of sense...

[@Aarynrivers238]

Love the vid I just wish we could still use the radio hide hatch so it could look stock until you open the cover unleashing a pioneer radio

[@gregkimura5906]

Good video. I would like to add one other item. You can do the same with the JBL stereo with the amplifier. Just make sure you use the wiring kit for the amplified model.

[@ProvoBeastAudio]

Which is linked in the description.

[@NAWAF-vc1px]

thanks for the video. do I still need Axxess ASWC-1 if I purchase PAC RP4.2-TY11 to keep the steering wheel controls? I have 2006 avalon jbl without nav.

[@corinlove4996]

Did you install your radio yet? If so did you have to buy a radio relocation harness along with the PAC RP4.2-TY11?

[@aadilaafa5057]

Thank you great job man

[@digitalgt1]

Thank you for such a great How-to video. You definitely answered a lot of the questions I had. I have a 2006 Avalon Limited with JBL Synthesis and factory navigation. You may not be able to answer my question as the vehicle you worked on didn't have those options. From what I understand, I won't need to relocate the factory head unit to the trunk, and I should use the PAC RP4.2-TT11 instead of the Access AWSC-1. If that's correct, do you know how the factory multifunction display will be affected? I don't plan to use factory navigation or the factory radio info setting once I switch to an Android Auto compatible head unit, but I would still like the HVAC, vehicle maintenance, and distance to empty/fuel consumption displays to work. Thanks in advance for any help you can offer. Cheers

[@ProvoBeastAudio]

You will need the PAC RP4.2-TT11 which according to pac, will retain your multifunciton display without the need to relocate the factory radio.

[@digitalgt1]

@@ProvoBeastAudio awesome! Thanks a bunch for your reply. You've been a big help.

[@ranyg6494]

​@@digitalgt1 ​ Hey so I have the same model but a 09. How did it go with the pac radio replacement?? Everything worked ok?? Would appreciate u letting me know thanks

[@duncanwoodbury]

@@ranyg6494 Yup. Everything worked perfectly. All of the steering wheel buttons worked as well as the HVAC buttons. All of the Limited stuff on the navigation screen worked also. Obviously, you won't get any entertainment system indicators on the navigation screen like volume, station, etc. You will briefly get "FM 87.9 MHz" text or something similar when you first start the car, but that's it. It disappears after a few seconds. Cheers. 🍻

[@Simpinski]

​@@ProvoBeastAudioi know im late, but do you have any idea if the RP3.2 works for the HVAC display as well?

[@AidanOLoughlin]

Great video! I have some questions though. 1) How do I get AM and FM to work? 2) How do I wire power to the backup camera? 3) When I try and wire the ASWC-1 accessory to the red wire, my locks keep unlocking and locking. What am I doing wrong? Thanks Again!

[@ProvoBeastAudio]

kzbin.info/www/bejne/e6u6hoSOfqyLqM0

[@441RLW]

Thanks. I have a new mission!!!

[@ProvoBeastAudio]

Click here for the updated version of this video: kzbin.info/www/bejne/rZ27hJqZiNRsqqs

[@omarbeltran8848]

How did you wire the reverse cable and the food brake or parking brake, I have a car just like this and I’m trying to do installation of a radio myself! Thanks

[@pstro09]

Hello, I’m a bit confused. In the intro, you say that this is the install for ‘05 - ‘12. (I have a ‘07 non jbl/nav) I purchased and wired everything up, relocated the radio to the trunk and got my display. For some reason however, the wire harness only wires up the front speakers and not the rear. Any solution/fix? Thanks, great video otherwise!

[@cruxfleetcos]

oh thank god for this THANK YOU

[@ricka5773]

Rick A 1 second ago I used the RP4.2-TY11 and with a JVC KW-V840BT. I lost the HVAC and Stereo Display. Any idea why? I'd hate to to relocate the radio to the trunk. That was the whole point of buying the PAC. Any advice is appreciated. AAMP Customer service was rather useless.

[@15smash]

In your video, the compartment below had a tape deck, my car has controls for the Navigation system. Is there any difference in the install? I imagine I'll use the Nav from Car Play, so does that compartment become useless? Did your tape deck continue to work?

[@brucemackinnon551]

I'm preparing to do same install, and have cassette deck. Check out post #'s 32-34 in this discussion of replacing cassette with storage pocket, and pretty sure same would work to replace nav controls: www.toyotanation.com/threads/replace-cassette.243792/page-2

[@tmyrick5507]

How do you keep the hvac display with the jbl system? I have the pac kit listed above but no hvac display with it....everything else works. Is there an option? thanks and good video

[@jeffmccoy1947]

Will the Pioneer AVH-1500NEX fit as well? Any changes to the parts list with the AVH-1500NEX?

[@mrwhodat1960]

So no other wire harness is need? Just the steering wheel control and the relocation harness?

[@cesarmoreno891]

Does this lower the sound quality since you’re using a aftermarket stereo? Got the jbl system on mine. I know when I replaced my 05 mustang shaker 500 stereo with a cheaper aftermarket CarPlay stereo it lowered my sound quality. I also bought a harness to retain factory amp. But I could tell the speakers didn’t sound as nice

[@melvinwofford479]

Nice video! Does the factory unit in the trunk have to be switched on and/or set to radio or disc?

[@carlosysoniasanchez6429]

Great video 👍 question I have 2007 Avalon with a Fujitsu what would be adapter part# I order the one you use but it’s a different connection.

[@jason4590]

I have a 2005 Avalon with JBL & Navigation and has a microphone near interior dome light to run the Nav by voice. Can I use that mic to talk on phone if I install a carplay radio? Also want to keep stock amp - what harness do I need for that.? And finally, the radio in video has been discontinued - what other would you recommend?

[@justoizaguirre4936]

Hey Chris, Great video on the install! I have a 2008 Avalon Limited w/JBL SYS. If buy the PAC RP4.2-TY11 wiring interface kit, do I still need the Axxess ASWC-1 Steering Wheel Control Module & Metra 70-8215 Wiring Harness Adapter Kit & will I still need to relocate the factor stereo, as per your video for the 2006-Avalon? Also, is the 6.2" the widest screen I can put in my 2008-Avalon? Your feedback would be appreciated! Thx, Justo

[@ProvoBeastAudio]

ASWC-1 isn’t necessary if you have the Pac harness.

[@ProvoBeastAudio]

Also any standard size double din will fit, regardless of screen size.

[@justoizaguirre4936]

@@ProvoBeastAudio Understood...I will be returning the additional items that I will no longer need for my install. I went with Pioneer AVH-X4800BS 7" Display, can't wait to install the new radio & rear view camera. Thx again Chris!

[@justoizaguirre4936]

Do I still need the Micro-Bypass?...I did get a Pioneer Radio?

[@kennethmolina3226]

That's nice work 💯💯💯💯💯

[@beechpilot57]

I installed aftermarket radio In my 2006 Avalon. I have the JBL amplified system so went with the PACRP4.2-TY11. The only problem I have noticed is the the FM reception is not as good as it was with the factory radio, I would say 30% less. I only used the bigger antenna plug and let the small one unhooked. I have read that there maybe a antenna preamp that needs power? Any ideas thanks

[@ProvoBeastAudio]

The harness adapter may have a solid blue wire on it, ensure that is connected. As an alternative, you can purchase an Antenna Amplifier and wire that in too which may help.

[@ricka5773]

I used the RP4.2-TY11 and with a JVC KW-V840BT. I lost the HVAC and Stereo Display. Any idea why? I'd hate to to relocate the radio to the trunk. That was the whole point of buying the PAC. Any advice is appreciated.

[@ProvoBeastAudio]

I'd reach out to PAC as they claimed it would retain the Informant Display.

[@saucedov26]

Nice video I have a question I have a 2006 avalon and it's has the navigation system What type of harness do I need to get

[@jsrgeorge]

Victor Saucedo check www.crutchfield.com Their support team may be able to help you with that

[@alanrobinson5168]

I bought the same harness but my factory harnesses don’t match up to the one harness I have all the power/speakers hooked up. New radio works and power to the exiting however I don’t have anything on my temp screen bc of the harness not matching up. It is the third harness that doesn’t have the speaker leads or power leads

[@alanrobinson5168]

My factory radio had 4 plugs. Two bigger and two smaller

[@CorrectContrarian]

What if I have the navigation Info screen that comes on the limited model? Will the kit you used work as well or do I need another?

[@ProvoBeastAudio]

You need another. See the description of the video.

[@beachplease808]

@@ProvoBeastAudio Hi I was wondering if you can do a write up of the install maybe with pictures? I couldn't figure out which wires you wired the microbypass wire to. And I couldn't figure out how you wired the AXXIS steering wheel control module. Thanks in advance.

[@Yewtuberandoms]

I have .a 2006 Avalon. If I want to use the navigation screen for a backup camera, can I cut a video cord and connect it to the black and yellow wire in the video?

[@ProvoBeastAudio]

kzbin.info/www/bejne/e6u6hoSOfqyLqM0

[@MrIwayne34]

I'm having trouble with the steering wheel controls and getting sound from the new radio where did you hook in the factory speaker wire

[@ProvoBeastAudio]

Sounds like you may have the JBL sound system if you have no audio. Please see the parts list in the description to determine if you have the correct install parts for your trim level.

[@brandttierney6628]

When would you want to use the PAC RP4.2-TY11? We have the screen above, so must we use the Metra 70-8215?

[@ProvoBeastAudio]

The pac kit is great when you have the factory JBL audio system. If you don't have JBL, you can use all the parts we did.

[@jameswoods7387]

Great video thanks a million

[@ProvoBeastAudio]

Subscribe!

[@yunggaskinz4714]

Damn i really needed that reverse cam install video. Is there possibly anywhere else its posted?

[@ProvoBeastAudio]

kzbin.info/www/bejne/e6u6hoSOfqyLqM0

[@johnwagner8465]

Thanks so much for the video...I see it's 4 years old...hope things are well with you after the last few years...question..I have I believe the same avalon..mine..2010 xls..without the jbl sound...can't get xm on the radio..and no blue tooth..so I'd like to do what you did..are those parts still available?.thanks again

[@ryanr4664]

The 2011 radio besil and radio are interchangeable with your car. Bluetooth wifi and touchscreen as well as XM.

[@DaGoat-hk1fu]

Hey I have a push start limited edition will I still be able to do this? Also I wanted to kno if u made a video on installing the back up camera many people have not tried it on this make and model please get back to me ASAP

[@familyfun6167]

If I have jbl audio in mine do I have to put radio in truck still

[@TransplantHelper]

What it you have the cassette deck below the radio? Can I just ignore it and unplug it???

[@hjsvideo]

I like your video and appreciated the time you spent recording it however you didn't die where to mount the black side brackets and the location that you had them mounted, they looked 180 degrees rotated. Then alignment pin on the Metra 95-8215S kit didn't allow any screw holes to line up. The Pioneer instructions say to use the factory brackets but the radio sits a little too low and too far back. Any ideas?? Thanks! HJS

[@a.b.4379]

Used a pac rp4.2-ty11 and it retains swc and the factory radio doesn't need to be relocated.

[@ranyg6494]

What about the multifunction display?? Everything working fine??

[@a.b.4379]

@@ranyg6494 I have a 2008 Avalon, I ended up going to best buy with the factory radio, and the tech took it apart and wired the motherboard into the harness, it cast me 100.00, everything works like factory-installed

[@mhandwork]

I've ordered the relocation harness twice because the first one didn't fit (Metra 70-8215AMP). It also didn't have 4 connectors so I thought I'd purchased the wrong one. Put the radio back in and ordered the Metra 70-8215. Got it today, tore stuff down and it's the same issue. I have a 2005 avalon but the connectors are different? Looking at the connectors coming out of the dash in your video at 9:07 those are different from what is coming out of my dash. I don't see a way to insert pics here but hopefully someone knows what I'm talking about.

[@ProvoBeastAudio]

Do you have factory JBL? if so, we have notes in the description regarding that specific trim level.

[@jamesapplegate3341]

I have a 2006 Avalon with JBL synthesis. I believe I just need the PAC RP4.2-TY11 Wiring Interface. This should replace both the Metra 70-8215 Wiring Harness Adapter AND Axxess ASWC-1 that is used in non JBL systems... or am I missing something? Thanks!

[@jamesmccracken4763]

Where are you located? I need one installed on my 09 Avalon. I have a double din I pulled out of my expedition just need all the wiring items you have and the dash kit.

[@ProvoBeastAudio]

Sure, we are located in Utah. Everything we used is linked in the description of the video.

[@joshbrown774]

Where did you get the plastic piece to make the panel a square?

[@ProvoBeastAudio]

Sonic Electronix, Amazon, Crutchfield, ebay, etc. Just about anywhere online.

[@Espiritu_Dragone]

I have an issue I have an extra orange illuminator line coming from the aftermarket touchscreen radio I ordered, and a dimmer line avail on the other end

[@gamblersroll1660]

Do you have any recommendations for Android? Since the 1300NEX has been discontinued, all I can find are used or price jumped into absurd numbers. I'm kind of new to this kind of thing, so it's a lot to jump into. Thanks for the detailed video, and the list provided in the About section, by the way; super useful, and I'm grateful to have a solid starting place.

[@deeme14]

I bought an avalon that doesn't have the factory radio in it. How can I do this?

[@tyndale25]

I have aligned all of the cables and I have an extra solid blue wire coming off the long harness with no s9lid blue anywhere to attach it to - and I also have an orange black cable coming off one of the short harnesses with no matching cable. Are these supposed to attach to a different color cable?

[@Fundaykidzz]

Great video wondering does this pioneer have navigation also? And how much would the radio and install cost if o had a local shop do it.

[@jamesmccracken4763]

I have a 09 Limited with JBL AND without Nav. When I out in the part number for the relocation harness two websites say it doesn’t fit my Avalon. WTH

[@ProvoBeastAudio]

IF you have JBL, you don't need to relocate the radio as the PAC module does it all for you. Check the description of the video.

[@n8inc924]

Provo: If you use the PAC interface do you still need to relocate the radio or have they solved that issue?

[@ProvoBeastAudio]

If using the pac interface, nope, no need to relocate the radio!

[@321krazykid]

You didn't show us how to connect the bypass wires

[@ProvoBeastAudio]

kzbin.info/www/bejne/Zqm8f6FugamppKc

[@rafaelnavarro8857]

Can I install an amp and subs on my Avalon 06 without complications? Don’t want to mess nothing up, since Avalon is a bit complicated when it comes to moving something on the original radio , not putting in a new radio, just an amp and some subs

[@DreamyDaysChannel]

Can you please explain to me the difference between using the metra 70-8215 and the PAC RP4.2-ty11

[@MrMshaka]

I'll have to watch it a few more times to build confidence to do it. I may get confused with connecting the wires. I have an android phone. Does pioneer have an android version of this unit?

[@martinandersen9810]

Yes there is a Pioneer new model that has both apply car play as well as andriod auto. I think it is the PIONEER AVH-2440NEX

[@MrMshaka]

@@martinandersen9810 I have the JBL Synthesis. Do you know what the differences may be?

[@tyndale25]

Shaka Harrison - no I don’t. I have the JBL speakers too - and all I. Know is they sound way better with this new Pioneer than they ever did with the factory radio.

[@chetkill]

I have the jbl synthesis system in my Avalon. Can’t seem to find the correct harness.

[@ProvoBeastAudio]

It's linked in the description!

[@davidcfries]

Hi, great video. But there's no link for the backup cam install. Please help

[@ProvoBeastAudio]

kzbin.info/www/bejne/e6u6hoSOfqyLqM0

[@tim8530]

Hey great video! I have a 2007 Toyota Avalon XLS and I want to put in new speakers and 2 12inch subs in the back do I need to do all this or can I just use my stock head unit? I would love to replace the head unit but it looks like so much work to retain ac control if I replace it I'm afraid I wont do it right lol. I appreciate anyone's help out there

[@mattycdaG]

where did you get the long harness that connects to stock radio in trunk?

[@miggyspain3218]

Question would it be possible to remove the top screen and move it down to where the factor radio was and then put the aftermarket radio on top where the climate control screen place. This way you have the after market on top and climate in the center

[@ProvoBeastAudio]

you could, but would require some fabrication, modification of the dash, and wiring. I don't recommend it.

[@miggyspain3218]

@@ProvoBeastAudio oh so I can ruining my dash that way? Sorry total noob when it comes to things like this

[@Chlo_2016]

Do you have a tutorial on wiring the PAC module?

[@brockster00]

Great video thank you for your time.and effort. I will be going with the way of maestro. My question I have is I want to keep the factory speakers. How many of the 12 speakers will work with the aftermarket radio? Thanks again.

[@ProvoBeastAudio]

Well, if you have the JBL system, the factory amp will retain all speakers. Generally speaking, if you have the factory JBL amplifier, you will need to Use the PAC RP4.2-TY11 Wiring Interface.

[@edwardtovar9564]

Provo Beast Audio Installation I have a 2005 Toyota Avalon with the JBL system. I was thinking about changing to aftermarket radio and was wondering if you can do a short video on how to wire to the pac 4.2-ty11. Thanks again

[@ProvoBeastAudio]

Unfortunately this wasn't a personal vehicle but essentially you wire it color for color to your new radio. You can either soldier and use heat shrink, or use butt connectors.

[@forevercaptured3890]

So if I'm installing ASWC-1 with pioneer double din my steering wheel control should work?

[@jamaalyarde]

The microbypass that you use for this install on the Pioneer could the same one be used for the Sony XAVAX1000 6.2 also ?

[@ProvoBeastAudio]

Sonys usually can just be grounded, no bypass needed. Pioneer's require a double or triple pulse negative to work which is why these bypasses are nice.

[@jamaalyarde]

Provo Beast Audio Installation ok thank you I got an issue now so do I need a next part of do I have to do some rewiring because after Sony screen was install everything works I have the factory radio in the trunk now the display screen at the top not displaying anything what would be the reason for that do I need a different part to put into one of the harness or it just need some rewiring to the factory radio to the steering wheel controls

[@scottreece1929]

I have the 05 xsl with JBL how do I bypass the JBL amp I have the same unit

[@shotgun2197]

Were you able to solve this issue?

[@joslinrussotto1275]

How much did it all cost with all the products to change the radio?

[@sarahmangone7785]

Ive seen a video that someone installed called this:Toyota Avalon Master AVCLAN LCD Module and everything works fine without relocating the radio at all. Thoughts?

[@ProvoBeastAudio]

The pac module does the same as well.

[@sarahmangone7785]

@@ProvoBeastAudio what is the Pac Module?

[@ProvoBeastAudio]

@@sarahmangone7785 linked in description

[@ProvoBeastAudio]

@@sarahmangone7785 Sure, it's linked in the description of the video. Any additional help, just shoot us a message on Facebook.

[@RogersRaceReady]

Hello I got the long wires to relocate the factory radio but do I also need a amplifier interface harness for non jbl systems? Thanks

[@yunggaskinz4714]

So i know you dont need to relocate the jbl system but if i want to keep the navigation i feel like ill have to anyways. does the relocation kit work for jbl systems or is there any alternative you think?

[@ProvoBeastAudio]

Notes in the description for JBL systems.

[@christianneuman2600]

Would you still need to relocate for a single din?

[@Napak1]

I have a 2008 limited with factory JBL. I ordered the Metra relocation harness, as well as the pac rp4.2 ty-11. Is there anything else I need to order to retain the factory amp, information screen, and steering wheel controls?

[@ProvoBeastAudio]

pac rp4.2 ty-11 should do all that for you actually. It's pricey, but it's worth it.

[@sonnyw1205]

At 6:00 we learn that "...this display still relies on this [the old] radio." BUT What if I care nothing about preserving the function of the display? Disadvantages?

[@ProvoBeastAudio]

Disadvantages is you will not preserve the temperature indicators on the screen. You can get around this by purchasing the Idatalink maestro and purchasing a radio to display those temperature settings. It will cost a bit more in parts though.

[@sonnyw1205]

Excellent, thank you. My current goal is finding the double din unit that works best with Android that I can plug in by usb as I believe that gives be the best possible audio reproduction. What is your view?

[@ProvoBeastAudio]

The Pioneer AVH-2300NEX is a great option and it also includes android auto.

[@wole04]

Why not get an Android Head Unit

[@defmud80]

Inwant to know if there is a touchscreen radio that would still let me use thr factory panel so i can still close the door to hide the unit.

[@DanTheDisciple]

Can you add to your description a link to all the tools we need to complete this installation?

[@dorianwisejr1871]

Whats the difference if you have the jbl system?

[@gwats19577]

Great video, thanks... just finished the install on my 2007 Avalon limited with the JBL Amp.. the correct Metra relocation cable has the connector and wiring pre-installed in the relocation harness... All I had to do was plug in the ASWC-1 module, and I now have full steering wheel controls!!! Hope this helps someone.....

[@ranyg6494]

Help lol I need to know if I only need the Pac radio replacement to use or so I still gotta use the aswc-1module or any of those cables he used in this video?!!!

[@peteb4350]

I have a 2007 Avalon Limited with nav and subwoofer. It has an additional 6+6 pin harness that plugs into the back of the factory headunit. I removed the factory 6+6 pin harness in order to plug in an eBay bluetooth adapter to the back of the headunit. With the bluetooth adapter installed, I press the "Disc" button, the display reads "Aux" and the bluetooth audio is routed to the door speakers, but audio is no longer being routed to the factory sub. The sub is still powered. If the bluetooth is connected and the music is paused and I turn the volume way up, a faint hum in the subwoofer gets louder, but otherwise no actual audio signal is being routed to the sub when music is playing. Same with FM or any other input, no audio is being routed to the sub under any circumstance with the factory 6+6 harness disconnected. I bought a 6+6 pin Y-adapter cable, so that I could simultaneously plug the factory 6+6 harness and the 6+6 bluetooth adapter into the back of the headunit via the Y cable... this made no difference. It still works as if I only have the bluetooth adapter plugged in. The only way to restore audio to the subwoofer is to remove the bluetooth adapter and plug the 6+6 factory harness directly back into the headunit. Then the sub works again, and obviously bluetooth is gone. Is there a way to have my bluetooth/aux input and factory subwoofer work at the same time?

[@Tommiebj10]

You have to get a module .you have a premium sound system which includes 10 speakers total . Your aux may only rate 4 outlets hence 4 speakers.

[@MisfitMills804]

So I have a dilemma. I have a 2008 Toyota Avalon xls with God and jbl.. I want to keep my GPS screen and for the jbl system to work. So if I get the factory relocation kit will this work properly? And do i still need the bypass? I'm not concerned about the steering wheel controls. please contact me a soon as possible bro! I have a box full of items collecting dust with the crying Michael Jordan face 😭

[@ProvoBeastAudio]

Check the description of the video, we the parts listed also for those with JBL.

[@MisfitMills804]

I did check the description but what I'm unclear about is that I have a jbl system and gps.. so would I need to get the factory relocation to keep the gps screen AND the PAC as well? Thanks for your help sir 👍

[@TleetoBlackLLC]

So if I have a JBL sound system, would I need a wiring harness to retain the center console display ? And not have to relocate my radio?

[@briancai1506]

You need the the pac rp4.2 ty11. It will retain the center console display and also retain the steering wheel controls. You need to one or two connectors (if I remember correctly) of the pac to the Avalon's harness. You don't need relocate the factory radio thanks to the pac.

[@ProvoBeastAudio]

You got it. We linked everything in the description for ya.

[@gwats19577]

If you simply install the relocation cable, and skip the steering wheel control harness do the HVAC controls on the dashboard still work?

[@theinkroom5642]

Yes, I can confirm HVAC display still works correctly if you omit the steering wheel adapter.

[@ChiM550i]

can you tell me why my rear deck rattles a lot when i play music? like from the bass it rattles like i have 2 12” subs in the truck when i don’t lol. can you tell me why it makes so much noise? what do i do

[@irismac2261]

What about the back up camera that's what I'm trying to figure out

[@briancai1506]

I put the camera wires through where the license plate lights wires goes through. I just took the rubber thing that hold wires off.

[@wole04]

I've been meaning to do this for a while (2 years actually) but always get discouraged when I found that I will loose the HVAC and blue screen. This helps a lot however, I have the JBL speakers on mine but no navigation... Guess I'll need another harness. I am getting an Android head unit. Will this harness also allow me to retain the inbuilt mic? will all speakers be powered? I have so many questions

[@ProvoBeastAudio]

If you have the factory JBL sound system, you will need to use the PAC RP4.2-TY11 Wiring Interface. This will retain the JBL amp and keep your HVAC controls as well. The factory mic may not be salvageable, so you will want to run your own.

[@wole04]

Thanks for the answer! Does the AC steering wheel controls still work or the new HU takes over these buttons as well?

[@ProvoBeastAudio]

Yep! It should, in theory, retain all those factory controls, but it's best to verify with Pac.

[@wole04]

So... Another question :D I've been looking at this required pac unit and it's over a hundred bucks and is a device... Not just a cable. So will I still need to relocate the stock radio? Or I can just install this harness /device and my blue screen works! Thanks again

[@ProvoBeastAudio]

Yep, its a entire smart module harness adapter because it's essentially retaining the factory JBL amplifier but at the same time, running the blue screen above. So it does eliminate the need to relocate the factory radio to the trunk.

[@Napak1]

Do the steering wheel temp controls work afterwards? Also, do I need to do anything different since I have a limited model with a factory amp?

[@ProvoBeastAudio]

Yes, all worked post installation as normal. If you have the factory JBL system, part requires will change. Check the description of the video for that list.

[@Napak1]

@@ProvoBeastAudio Awesome. Thanks for the reply!