2005 Subaru STI WHITELINE sway bars install

Installing 24mm white line sway bars to the front and rear of my 2005 Subaru STi along with the Cusco type 1 brace! On top of running BC racing coilovers, the difference of adding the sway bars and brace was insane. The car definitely sticks to the ground and feels linear.
Make sure you use aftermarket sway bar end links with these swaybars, your oem ones will not hold up to the added force.
I used kartboy end links and they feel solid! You can find them on Amazon, here’s a link. These will fit on wrx’s, sti’s, and Imprezas.
Kart boy end links: amzn.to/34MHOF6
Here’s a link to a set of new bc racing br coilovers for 05-07 sti
amzn.to/33pZtSD
My favorite STI Hoodie: amzn.to/3ugz5FR
Thanks for watching!
#subaru#wrx#sti#blobeye

[@ChrisPlaysDG]

Great video! I am going to save this, I am getting coilovers, sway bars, and strut tower bar soon. The subframe bar is going to be added to my list now too

[@DrewRandall]

Thank you! Hope it was helpful! I recommend those kartboy end links with the sway bars because the stock ones will not hold up with the added tension. My kartboy end links have held up great. amzn.to/34sAG0l

[@dzzejkop]

Save on the strut brace, it doesnt do much since struts are near the fire wall

[@mr.eervianlesmana9263]

@@DrewRandall .is this sway bar also available for gc8 wrx?

[@toplistcrew7645]

I’d remove that header wrap, only because if there is a leak and it catches fire you will regret it. I almost did the same thing and wrapped my ELH and was advised against it.

[@TheeHenley]

Wish my sti was that clean underneath 😔😪

[@kfir8087]

The undercarriage is so clean! North east Subarus are a headache!

[@ronnieboucherthecrystalcraftsm]

i bet your standard sway bar = rear brackets - will break and you will need white line ream sway bar mounting brackets !

[@BcapGarage]

That’s sick

[@Sti_yampitbuilt]

Fire 🔥

[@xxkazu78]

Os it possible to do rears with car not raised?

[@emmanuelteitelbaum]

Another video I saw had the lateral lock links in the rear. Did it say in the instructions where to put them?

[@martinssau]

What setting you end up using them ? No issues with oem endlinks and mount?

[@ericn7698]

Great video, man! Quick questions: Did the Cusco brace come with installation hardware, and which retailer did you purchase it from? Thanks!

[@DrewRandall]

Eric N thanks dude! The Cusco brace uses the factory bolts holding the subframe. It’s a super easy install. I got mine from rallysportdirect

[@eastoakland-S65feen]

@@DrewRandall did u order all parts from them?

[@robk5745]

I have an 04 sti, how have you liked the changes from the sway bars and rear control arm set up? What did you notice?

[@lukealder6181]

i just installed 24mm front and rear. i do notice a difference. not gigantic but it’s helped a lot with traction and it reduced a lot of my understeer

[@caseywinter1993]

What brand are ur control arms

[@DrewRandall]

Factory oem!

[@maxcato2450]

Make more videos

[@ericbarney5797]

Where the greezz at?

[@BreakYourMark]

Whiteline sway bars come with grease free bushings

[@taylordunker4376]

They're fuzzy!

[@MannyG88yo]

What's does the blue bar do?

[@77knives]

Stiffens the front sub frame, steering is immensely better with a front sub frame brace. The one in the video is just a single bar, but I have a H brace. 4 point contact so much stiffer then 2 point.

[@MannyG88yo]

@@77knives for the H brace does that bolt on the U brace? My tuner removed and didn't install it back I didn't realise, but apparently it's good for weight reduction but safety if you have a head on crash

[@77knives]

@@MannyG88yo Unsure what you mean by "U brace." A H brace is an aftermarket brace that bolts onto the preexisting front sub-frame.

[@eastoakland-S65feen]

@@77knives whered u get the 4point brace?

[@MannyG88yo]

@@77knives thanks for replying, have you got whiteline sway bars?