2006-2007 gsxr 600 quantum fuel pump complete how to install, step by step

@quantumfuelsystems quantum fuel pump and regulator install in a 2006 - 2007 gsxr 600

[@renogoodson3728]

Good vid

[@chukob5]

Question I also have a 06 what has your top speed been according to speedo? I’m 179

[@crherniman]

Is this pump still performing as it should now? I have seen mixed reviews. I need a new one but I have a hard time spending over 700 on an oem pump.

[@shadowbox813]

Yes. I've had 2 of there pumps now. 1 is in my 07 1000rr and it's a year and half old now and 3k miles and still working great. This one has been working great and few hundred miles on it so far.

[@mantoshow8852]

Hi I changed fuel filter in my gsr600 and after 20 miles it won't start againg. I've noticed that after I disconnect fuel line from the tank fuel is dripping out and I don't think it was before.

[@kevinpeterson4098]

I added some lucas fuel treatment and i noticed at a stop light it surges a little and when i take off it surges and hesitates a little. Do you think my pump is going bad? It has 34,000 miles on the original pump. I might just order this pump and hope that helps. Thanks for this video!

[@shadowbox813]

Could be a simple vacuum leak around the air box. Sounds more of a air leak issue.

[@99gpandy28]

Housing on your fuel pump has a strainer hidden in top of plastic ,near FPR ,they need cleaning as well as replacing strainer at bottom of pump waste of time swapping pumps without either cleaning or replacing these 2 strainers wich are on all fuel pump assembly's

[@MrJoker-be5eu]

Hi can I have the link or where I can buy it my fuel pump makes sounds but I don’t hear it prime the bike trying to turn on but not getting gas I believe lol😅

[@Jc-kq2lw]

How did it hold up so far? Did it bust or ur bike still going?

[@shadowbox813]

@Jc-kq2lw still going strong. Never had any issues with their pumps in any of my bikes. My 1000rr is going on 3 years now.

[@Jc-kq2lw]

@@shadowbox813 rowdy, I just ordered one for my 05 zx10

[@WhoaMoments]

WHOA!

[@tinyrevolver8579]

I broke a lil piece of black plastic where you connected the positive wire from the pump would that cause it to not start the bike or could it be the regulator?

[@shadowbox813]

Yes. Without a good connection you'll start having prime and start issues.

[@maiquelcastro1115]

Did it come with the top small metal part that connects to the fuel filter housing?

[@shadowbox813]

Yes it does. Everything you seen here came with it. I only recommend going back with the stock wiring connector.

[@DavidMelendez-r3m]

Hey I have a question. I'm looking for a piece for the fuel pump the silver rod part don't know the name of it.?

[@CholoStout]

Did you ever figure out the name of this part cause I can’t find it either ?

[@GsxrR6]

I just replaced my fuel pump with a quantum, when I put it back into the tank it will prime and allow the bike to start but soon after the fuel fuse blows. Any ideas?

[@joshuadavis903]

@tylercain2662 My bike is having the same fuse issue. Did you find a solution?

[@GsxrR6]

@@joshuadavis903 nah I replaced the fuel fuse(10A) with a 15A, not recommended but I’ve been riding the bike ever since with no issues or melted wires

[@rananena]

How many kilometres should be replaced

[@shadowbox813]

I think it's just by preference or by need be. Mine was still good but went to a new one anyways. I normally see myself replacing oem pumps on most bikes here in the states around 25-30k miles.

[@v1z3]

Idk if you still respond, but I’m having trouble. it seems that the fuel sensor float is like upside down on mine. i seen that your float (at it's resting state) is hanging down, but mine isnt like that, it's like the opposite.

[@shadowbox813]

That's just how mine was originally. Is yours a 06/07?

[@v1z3]

@@shadowbox813 yeah it is. I got a donor fuel pump from a friend, the float is facing downwards like in the video, but now the fuel light is flashing and sometimes solid even though it’s a full tank

[@Nightdare]

I know this is a year later, but just for future reference for other people: you probably got a 1000 pump, it's basically the same except the float (I know because my 1K pump failed on the dyno, and the tuner only had a K6/7 600/750 pump assembly lying around, all we had to do was change the float)

[@v1z3]

@@Nightdare hey, I got it fixed, somehow the float rod got pushed over the little pin that doesn't allow it to orient to that rotation. So I just pushed it back over the pin and it works perfectly now lol.

[@MegaWaxz]

Where did buy all your parts bro?

[@joshuaturner2970]

Ebay

[@MegaWaxz]

@joshuaturner2970 thx. I bought mine through there website for my hayabusa and finally my bike started like brand new again.