Fuel Pump With Regulator Replacement For Suzuki GSX-R600 / GSX-R750 2008-2018

Order link
www.fuelpumpfa...
FPF Fuel Pump With Regulator For Suzuki GSX-R600 / GSX-R750 2008-2018, Replaces Suzuki 15100-37H00, 15100-14J01, 15100-14J00, 15100-37H01
Meet or exceed OEM performance and durability
Drop in replacement design
Improved internals like bushing, turbine impeller and Japan armature electric motor for better
performance and durability
Advanced pressure relief valve to insure the correct PSI
Hassle free 1-Year replacement warranty
Noise Output: QUIET
Flow: 100-120 Liter Per Hour, at 3.0Bar/13.5V
Voltage: 12V min.
Song: Ikson - Horizon (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Ikson - Horizon (Vlog ...

[@IRepulsiv]

I spent an entire day thinking I bought a bad fuel pump, and then was stressed thinking I had bad fuel injectors and all this other type of nonsense. I came back to this video and where you stopped it and said “don’t forgot to put the second O ring back on top of the fuel pump or it won’t run correctly. That is exactly what I did. I followed step by step after you and the moment I put it back in it started right up. Thankyou so much onfg I am relieved .

[@IRepulsiv]

Only thing that was off was the pump wires were flipped lol

[@gavin4703]

Just bought this kit for my 2014 gsxr600! Thanks!

[@lettkt7ss]

Pump wire are flipped

[@jordanfoster8251]

Facts

[@Unk_pista]

I followed this video and pulled it liek 4 times out the tank wondering what the issue was 😂, then I swapped the wires and started right up

[@pacobanshee5265]

Hello there! Any fuel pump for a GSX-R1000 K7-K8??

[@phatrides222000]

I feel like this job should be easier than it is.

[@deluth4638]

Good luck getting that to run after you wired it backwards

[@ahmadabbara6873]

Can I use a 2014 gxsr750 fuel pump on a 2009 model?

[@jamikalthompson4305]

What is the lil plastic piece that sit on top of the fuel pump motor

[@99gpandy28]

Top strainer and fuel pressure regulator, wich I'd suggest should be cleaned if your cheaping out and not replacing that ,as they restrict fuel flow when dirty.

[@99gpandy28]

You should clean top strainer with some carb cleaner and rinse with clean petrol do not soak in carb cleaner and remove FPR and all orings if you do this ,just quik rinse if you are not replacing top strainer and FPR .

[@e30_lad_ireland]

⁠​⁠@@99gpandy28mate, can I just replace the new fuel regular instead of cleaning it? Also, I see in Suzuki diagram the plastic housing which has pump motor inside is called “cup, reservoir”. Suppose that part also need to be cleaned or replaced? Both parts can be bought eom. Of course the “tea-bag” pre-filter needs to be cleaned or replaced as demonstrated in the video.